Extend the life of air-powered tools and equipment by removing particles and water droplets from compressed air. Connect these filters to other SMC units in the same series with joiner clamps (sold separately) to customize your air preparation system. You’ll only need 25 mm of clearance below the filter for emptying condensate or switching out the filter element. The filter element isn’t attached to the housing, so it comes off when the bowl does.

Filters with an automatic drain periodically release condensate into the air, eliminating the need for manual emptying.

Filters with a filter service indicator let you know when the filter element needs to be changed. The indicator will turn increasingly red as the filter clogs.

Filters with mounting brackets can be attached to a wall or equipment.

Joiner clamps (sold separately) create compact, airtight connections between components, even if the pipe sizes are slightly different. They come with mounting brackets to attach the filter to a wall or equipment.

Replace a damaged bowl on your SMC modular compressed air filter, or switch to a different bowl material or drain type. These bowls come with an O-ring to ensure a tight seal.

Bowls with an automatic drain periodically release condensate into the air, eliminating the need for manual emptying.

Aluminum bowls are more durable than plastic bowls, so they hold up better to bumps and drops.

BSPP threads are also known as G threads. BSPT threads are also known as R threads.