About Air Preparation
More
Compressed Air Lubricators
Bowl with
Sight Glass
Add lubrication to your air supply to extend the service life of air-powered tools and equipment. Lubricators have a clear bowl or sight glass so you can see inside to view the oil level. Install in your air line after filters and regulators.
BSPP threads are also known as G threads.
Mounting brackets (sold separately) allow you to attach the lubricator to a wall or equipment.
ARO Modular Compressed Air Lubricators
Add lubrication to your air supply to extend the service life of air-powered tools and equipment. Lubricators have a clear bowl or sight glass so you can see inside to view the oil level. Install in your air line after filters and regulators.
Joiner clamps (sold separately) connect the lubricator to another ARO modular component with the same series number. They come with mounting brackets to attach the lubricator to a wall or equipment.
End block sets (sold separately) allow you to swap out filter/regulator/lubricator components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them.
Lubricators | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Overall | Joiner Clamps | End Block Sets | ||||||||||
| Manufacturer Series | Inlet | Outlet | Max. Flow Rate | Max. Pressure, psi | Max. Temp., °F | Ht. | Wd. | Each | Each | Each | |||
Polycarbonate Plastic Bowl—Clear Without Drain | |||||||||||||
| 1000 | 1/8 | 1/8 | 34 scfm @ 100 psi | 150 | 125° | 5" | 1 5/8" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
| Replacement Lubricator Bowl | 0000000 | Each | 000000 |
Aventics Modular Compressed Air Lubricators
Add lubrication to your air supply to extend the service life of air-powered tools and equipment. These lubricators connect to other Aventics units of the same series with joiner clamps (sold separately)—even if the pipe sizes are slightly different—so you can customize your air preparation system. You can see inside the bowl to check the oil level for refilling. Adjust the amount of lubricant in the air based on your equipment's performance. If your machine is running loudly or showing signs of wear, increase the amount; if you notice oil building up, decrease it. Install these lubricators in your air line after filters and regulators.
Mounting brackets (sold separately) allow you to attach these lubricators to a wall or equipment.
Joiner clamps (sold separately) create compact, airtight connections between components. These clamps come with mounting brackets.
SMC Modular Compressed Air Lubricators
Add lubrication to your air supply to extend the service life of air-powered tools and equipment. Lubricators have a clear bowl so you can see inside to view the oil level. Install in your air line after filters and regulators.
Joiner clamps (sold separately) connect the lubricator to another SMC modular component with the same series number. They come with mounting brackets to attach the lubricator to a wall or equipment.
ARO Modular Compressed Air Filter/Regulator/Lubricators (FRLs)
An ARO filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure. Regulator is relieving style, so it exhausts when the downstream pressure exceeds the set pressure. Filter and lubricator have a clear bowl or sight glass so you can monitor the contents inside.
Stacked filter/regulator/lubricators require less horizontal space than inline FRLs. The filter and regulator are joined top-to-bottom with the lubricator on the side.
Mounting brackets allow you to attach the filter/regulator/lubricator to a wall or equipment.
Joiner clamps (sold separately) connect the filter/regulator/lubricator to another ARO modular component with the same series number. They come with mounting brackets.
End block sets (sold separately) allow you to swap out filter/regulator/lubricator components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them.
Filter/Regulator/Lubricators (FRLs) | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Overall | Joiner Clamps | End Block Sets | Filter Elements | ||||||||||||
| Manufacturer Series | Inlet | Outlet | Max. Flow Rate | Max. Pressure, psi | Removes Particle Size Down To, microns | Pressure Regulating Range, psi | Ht. | Wd. | Each | Each | Each | Each | ||||
Inline with Clear Polycarbonate Plastic Bowl | ||||||||||||||||
| 1000 | 1/8 | 1/8 | 34 scfm @ 100 psi | 150 | 5 | 0-140 | 5 1/8" | 4 3/4" | 0000000 | 0000000 | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
Stacked with Clear Polycarbonate Plastic Bowl | ||||||||||||||||
| 1000 | 1/8 | 1/8 | 36 scfm @ 100 psi | 150 | 5 | 0-140 | 6 1/4" | 3 1/4" | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
Compressed Air Filter/Regulator/Lubricators (FRLs)
A filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure. Regulator is relieving style, so it exhausts when the downstream pressure exceeds the set pressure. Filter and lubricator have a clear bowl or sight glass so you can monitor the contents inside.
Stacked filter/regulator/lubricators require less horizontal space than inline FRLs. The filter and regulator are joined top-to-bottom with the lubricator on the side.
Polyurethane bowls are more chemical resistant than polycarbonate bowls for use with synthetic compressor oils.
Mounting brackets allow you to attach the filter/regulator/lubricator to a wall or equipment.
Filter/Regulator/Lubricators | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Overall | Mounting Brackets | Replacement Filter Elements | Replacement Filter Bowls | |||||||||||
| Inlet | Outlet | Max. Flow Rate | Max. Pressure, psi | Removes Particle Size Down To, microns | Pressure Regulating Range, psi | Ht. | Wd. | Each | Each | Each | Each | ||||
Inline with Clear Polycarbonate Plastic Bowl | |||||||||||||||
| 1/8 | 1/8 | 10 scfm @ 100 psi | 150 | 20 | 0-125 | 6 1/4" | 5 1/8" | 0000000 | 0000000 | 0000000 | 000000 | 0000000 | 000000 | 000000 | 00 |
Inline with Clear Polyurethane Rubber Bowl | |||||||||||||||
| 1/8 | 1/8 | 12 scfm @ 100 psi | 150 | 20 | 0-125 | 6 1/8" | 5 1/8" | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
Stacked with Clear Polycarbonate Plastic Bowl | |||||||||||||||
| 1/8 | 1/8 | 10 scfm @ 100 psi | 150 | 5 | 5-100 | 6 1/2" | 3 5/8" | 00000000 | 000000 | 0000000 | 00000 | 00000000 | 00000 | 0000000 | 000000 |
SMC Modular Compressed Air Filter/Regulator/Lubricators (FRLs)
Polycarbonate
Plastic Bowl
with Opaque
Aluminum Bowl
An SMC filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure. These FRLs connect to other SMC units of the same series with joiner clamps (sold separately)—even if the pipe sizes are slightly different—so you can customize your air preparation system. The regulator is relieving, so it will exhaust when the downstream pressure exceeds the set pressure.
Inline FRLs only need 25 mm of clearance below the filter for emptying condensate or switching the filter element. The filter element isn’t attached to the housing, so it comes off when the bowl does. Each component can be replaced or repaired on its own to reduce overall maintenance costs.
Stacked FRLs require less horizontal space than inline FRLs. The filter and regulator are joined top-to-bottom with the lubricator on the side.
Aluminum bowls are stronger than plastic bowls. They won’t crack or shatter if dropped.
BSPP threads are also known as G threads.
Joiner clamps (sold separately) create compact, airtight connections between components. They come with mounting brackets.
Filter/Regulator/Lubricators (FRLs) | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Overall | Replacement Filter Bowls | Replacement Joiner Clamps | ||||||||||||
| Manufacturer Series | Inlet | Outlet | Max. Flow Rate | Max. Pressure, psi | Removes Particle Size Down To, microns | Pressure Regulating Range, psi | Includes | Ht. | Wd. | Each | Each | Each | |||
Inline with Clear Polycarbonate Plastic Bowl | |||||||||||||||
| AC20-D | 1/8 | 1/8 | 52 scfm @ 100 psi | 145 | 5 | 7.25-123 | Mounting Bracket | 5 1/2" | 5" | 00000000 | 0000000 | 00000000 | 000000 | 00000000 | 00000 |
Inline with Opaque Aluminum Bowl | |||||||||||||||
| AC20-D | 1/8 | 1/8 | 52 scfm @ 100 psi | 145 | 5 | 7.25-123 | Mounting Bracket | 5 1/2" | 5" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 0000 |
Stacked with Clear Polycarbonate Plastic Bowl | |||||||||||||||
| AC20-D | 1/8 | 1/8 | 52 scfm @ 100 psi | 145 | 5 | 7.25-123 | Mounting Bracket | 7" | 3 1/4" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 |
Stacked with Opaque Aluminum Bowl | |||||||||||||||
| AC20-D | 1/8 | 1/8 | 52 scfm @ 100 psi | 145 | 5 | 7.25-123 | Mounting Bracket | 7" | 3 1/4" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 |
Filter/Regulator/Lubricators (FRLs) | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Overall | Replacement Filter Bowls | Replacement Joiner Clamps | ||||||||||||
| Manufacturer Series | Inlet | Outlet | Max. Flow Rate | Max. Pressure, psi | Removes Particle Size Down To, microns | Pressure Regulating Range, psi | Includes | Ht. | Wd. | Each | Each | Each | |||
Inline with Clear Polycarbonate Plastic Bowl | |||||||||||||||
| AC20-D | 1/8 | 1/8 | 52 scfm @ 100 psi | 145 | 5 | 7.25-123 | Mounting Bracket | 5 1/2" | 5" | 00000000 | 0000000 | 00000000 | 000000 | 00000000 | 00000 |
Stacked with Clear Polycarbonate Plastic Bowl | |||||||||||||||
| AC20-D | 1/8 | 1/8 | 52 scfm @ 100 psi | 145 | 5 | 7.25-123 | Mounting Bracket | 7" | 3 1/4" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 |
ASCO Modular Compressed Air Filter/Regulator/Lubricators (FRLs)
An ASCO Numatics filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure. Regulator is relieving style, so it exhausts when the downstream pressure exceeds the set pressure. Filter and lubricator have a clear bowl so you can monitor the contents inside.
Stacked filter/regulator/lubricators require less horizontal space than inline FRLs. The filter and regulator are joined top-to-bottom with the lubricator on the side.
Mounting brackets allow you to attach the filter/regulator/lubricator to a wall or equipment.
Joiner clamps (sold separately) connect the filter/regulator/lubricator to another ASCO Numatics modular component with the same series number. They come with mounting brackets.
Filter/Regulator/Lubricators (FRLs) | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Overall | Joiner Clamps | ||||||||||
| Manufacturer Series | Inlet | Outlet | Max. Flow Rate | Max. Pressure, psi | Removes Particle Size Down To, microns | Pressure Regulating Range, psi | Ht. | Wd. | Each | Each | ||
Inline with Clear Polycarbonate Plastic Bowl | ||||||||||||
| 651 | 1/8 | 1/8 | 29.5 scfm @ 100 psi | 232 | 5 | 7-125 | 7 3/4" | 5 7/8" | 0000000 | 0000000 | 0000000 | 000000 |
Stacked with Clear Polycarbonate Plastic Bowl | ||||||||||||
| 651 | 1/8 | 1/8 | 26.2 scfm @ 100 psi | 232 | 5 | 7-125 | 9 1/2" | 4" | 0000000 | 000000 | 0000000 | 00000 |