About Air Preparation
More
Norgren Modular Compressed Air Regulator Manifolds
Connect two or more of these manifold regulators to meet multiple pressure requirements from a single air supply—set a different output pressure with each regulator. Each regulator has two regulated outlets and one unregulated outlet. Regulators are relieving style, so they exhaust when the downstream pressure exceeds the set pressure. Install in your air line after filters.
Mounting brackets (sold separately) allow you to attach manifold regulators to a wall or equipment.
Joiner clamps (sold separately) connect manifold regulators to each other and other Norgren modular components with the same series number. They come with mounting brackets.
End block sets (sold separately) allow you to swap out filter/regulator/lubricator components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them.
Regulator Manifolds | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Joiner Clamps | End Block Sets | ||||||||||||
| Manufacturer Series | Inlet Pipe Size  | Outlet Pipe Size (No. of Outlets) | Max. Flow Rate | Max. Pressure, psi | Wd. | Ht. | Max. Temp., °F | Choose a Pressure Regulating Range, psi | Each | Each | Each | |||
Zinc Housing | ||||||||||||||
Series No. 72—NPT Female Inlet and Outlets | ||||||||||||||
| R72 | 3/8 | 3/8 (1 Unregulated), 1/4 (1 Regulated), 1/8 (1 Regulated) | 83 cfm @ 100 psi | 300 | 2" | 4 1/4" | 150° | 000000 | 000000 | 000000 | 000000 | 0000000 | 000000 | |
| Mounting Bracket for Series No. 72 Regulator Manifolds | 0000000 | Each | 000000 |
Wilkerson Modular Compressed Air Regulator Manifolds
Connect two or more of these manifold regulators to meet multiple pressure requirements from a single air supply—set a different output pressure with each regulator. Each regulator has two regulated outlets, one unregulated outlet, and an additional port that can be used for a pressure gauge. Regulators are relieving style, so they exhaust when the downstream pressure exceeds the set pressure. Install in your air line after filters.
Joiner clamps (sold separately) connect manifold regulators to each other and other Wilkerson modular components with the same series number. They come with mounting brackets to attach the regulator to a wall or equipment.
End block sets (sold separately) allow you to swap out filter/regulator/lubricator components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them.
Gauges are not included with Series No. 19 manifold regulators.
Regulator Manifolds | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Joiner Clamps | End Block Sets | |||||||||||||
| Manufacturer Series | Inlet Pipe Size | Outlet Pipe Size (No. of Outlets) | Max. Flow Rate | Max. Pressure, psi | Gauge Included | Wd. | Ht. | Max. Temp., °F | Choose a Pressure Regulating Range, psi | Each | Each | Each | |||
Aluminum Housing | |||||||||||||||
Series No. 19—NPT Female Inlet and Outlets | |||||||||||||||
| R19 | 3/8 | 3/8 (1 Unregulated), 1/4 (2 Regulated) | 62 scfm @ 100 psi | 300 | No | 2 3/8" | 5 1/2" | 150° | 0000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 | |
| R19 | 3/8 | 3/8 (1 Unregulated), 1/4 (2 Regulated) | 94 scfm @ 100 psi | 300 | No | 2 3/8" | 5 1/2" | 150° | 0-125 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
| R19 | 3/8 | 3/8 (1 Unregulated), 1/4 (2 Regulated) | 132 scfm @ 100 psi | 300 | No | 2 3/8" | 5 1/2" | 150° | 0-250 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
Parker Modular Compressed Air Regulator Manifolds
Join two or more of these manifold regulators to power multiple tools or machines from a single air supply—you can set a different output pressure on each one. Connect them to other Parker components in the same series with joiner clamps (sold separately) to customize your air preparation system. These regulators come with one regulated outlet on their back and one unregulated outlet. All are relieving regulators, so they exhaust when the downstream pressure exceeds the set pressure. Install them in your air line after filters.
Mounting brackets (sold separately) allow you to attach the regulator to a wall or equipment.
Joiner clamps (sold separately) create compact, airtight connections between components. These clamps come with mounting brackets.
Regulator Manifolds | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Mounting Brackets | Joiner Clamps | |||||||||||||
| Manufacturer Series | Inlet Pipe Size | Outlet Pipe Size (No. of Outlets) | Max. Flow Rate | Max. Pressure, psi | Wd. | Ht. | Max. Temp., °F | Regulating Accuracy | Choose a Pressure Regulating Range, psi | Each | Each | Each | |||
Aluminum Housing | |||||||||||||||
Series No. P32—NPT Female Inlet and Outlets | |||||||||||||||
| P32 | 3/8 | 3/8 (1 Unregulated), 1/4 (1 Regulated) | 94 scfm @ 145 psi | 300 | 2 3/8" | 5 5/8" | 150° | ±3 psi | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 | |
SMC Modular Compressed Air Regulator Manifolds
Connect two or more of these manifold regulators to meet multiple pressure requirements from a single air supply—set a different output pressure with each regulator. Use joiner clamps (sold separately) to connect them to other SMC units of the same series, so you can customize your air preparation system. These regulators come with one regulated outlet on their back and one unregulated outlet. All are relieving regulators, so they exhaust when the downstream pressure exceeds the set pressure. Install them in your air line after filters.
Joiner clamps (sold separately) create compact, airtight connections between components. These clamps come with mounting brackets.
End block sets (sold separately) allow you to swap out filter/regulator/lubricator components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them.
End caps (sold separately) seal off any unused pipe ports on SMC modular systems. They attach with a joiner clamp (not included).
Mounting brackets (sold separately) allow you to attach these regulators to a wall or equipment.
Regulator Manifolds | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Joiner Clamps | End Block Sets | End Caps | Mounting Brackets | ||||||||||||||||
| Manufacturer Series | Inlet Pipe Size | Outlet Pipe Size (No. of Outlets) | Max. Flow Rate | Max. Pressure, psi | Gauge Included | Wd. | Ht. | Housing Material | Max. Temp., °F | Pressure Regulating Range, psi | Each | Each | Each | Each | Each | |||||
Series No. 30 | ||||||||||||||||||||
NPT Female Inlet and Outlets | ||||||||||||||||||||
| AR30M-D | 3/8 | 3/8 (1 Unregulated), 1/4 (1 Regulated) | 70 scfm @ 100 psi | 145 | Yes | 2 1/16" | 4 5/8" | Aluminum | 140° | 7.25-123 | 0000000 | 000000 | 00000000 | 00000 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 |
BSPP Female Inlet and Outlets | ||||||||||||||||||||
| AR30M-D | 3/8 | 3/8 (1 Unregulated), 1/4 (1 Regulated) | 70 scfm @ 100 psi | 145 | Yes | 2 1/16" | 4 5/8" | Aluminum | 140° | 7.25-123 | 0000000 | 00000 | 00000000 | 0000 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
BSPT Female Inlet and Outlets | ||||||||||||||||||||
| AR30M-D | 3/8 | 3/8 (1 Unregulated), 1/4 (1 Regulated) | 70 scfm @ 100 psi | 145 | Yes | 2 1/16" | 4 5/8" | Aluminum | 140° | 7.25-123 | 0000000 | 00000 | 00000000 | 0000 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
Series No. 40 | ||||||||||||||||||||
NPT Female Inlet and Outlets | ||||||||||||||||||||
| AR40M-D | 3/8 | 3/8 (1 Unregulated), 3/8 (1 Regulated) | 141 scfm @ 100 psi | 145 | Yes | 2 3/4" | 5" | Aluminum | 140° | 7.25-123 | 0000000 | 00000 | 00000000 | 0000 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
BSPP Female Inlet and Outlets | ||||||||||||||||||||
| AR40M-D | 3/8 | 3/8 (1 Unregulated), 3/8 (1 Regulated) | 141 scfm @ 100 psi | 145 | Yes | 2 3/4" | 5" | Aluminum | 140° | 7.25-123 | 0000000 | 00000 | 00000000 | 0000 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
BSPT Female Inlet and Outlets | ||||||||||||||||||||
| AR40M-D | 3/8 | 3/8 (1 Unregulated), 3/8 (1 Regulated) | 141 scfm @ 100 psi | 145 | Yes | 2 3/4" | 5" | Aluminum | 140° | 7.25-123 | 0000000 | 00000 | 00000000 | 0000 | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
Manifold Blocks for Norgren Modular Compressed
Air Filter/Regulator/Lubricators (FRLs)
Distribute compressed air to multiple locations from a single source. These manifolds connect with Norgren modular components that have the same manufacturer series.
Use joiner clamps to connect the manifold block to another Norgren modular unit with the same series number.
Space-Saving Compressed Air Filter/Regulator Manifolds
Minimize the footprint of your air preparation system with these all-in-one manifolds—they include a filter, a regulator, a slow-start valve, and a safety lockout valve. Use them to distribute clean, compressed air to up to four locations. Three regulated outlets provide air at the same set pressure, and one unregulated outlet provides high-pressure air for blow guns and other tools. All controls are on the front panel, so you don’t need clearance above or below these manifolds to make adjustments. Since the inlet and outlet ports swivel until tightened, you can connect to your air line without rotating the manifold.
The filter removes both particles and water, and it has an indicator to let you know when the filter element needs to be replaced. The regulator is relieving, so it will exhaust when the downstream pressure exceeds the set pressure. To protect sensitive components from hard starts and surges, the slow-start air-exhaust valve eases pressure into your system. The safety lockout valve keeps the system from starting up during maintenance—lock it with the included padlock and key.
These manifolds are rated IP65 for protection from dust and low-pressure jets of water. When the 1/4 NPT outlets are not in use, cover them with the included threaded plugs to maintain this rating.
Manifolds that operate on 24V DC have LEDs that indicate if the pressure is above or below your set pressure and if the air supply is on or off. They are ATEX certified for use in hazardous locations.
Filter/Regulator Manifolds | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Replacement Filter Elements | |||||||||||||
| Inlet Pipe Size | Outlet Pipe Size (No. of Outlets) | Voltage | Max. Flow Rate | Pressure Regulating Range, psi | Max. Pressure, psi | Max. Temp., °F | Removes Particle Size Down To, microns | Environmental Rating | Wd. | Ht. | Each | Each | ||
NPT Female Inlet and Outlet | ||||||||||||||
Clear Bowl with Automatic Drain | ||||||||||||||
| 3/8 | 3/8 (1 Regulated), 1/4 (1 Unregulated), 1/4 (2 Regulated) | __ | 120 scfm @ 100 psi | 0-120 | 145 | 120° | 5 | IP65 | 7" | 5 3/4" | 000000 | 0000000 | 0000000 | 000000 |
| 3/8 | 3/8 (1 Regulated), 1/4 (1 Unregulated), 1/4 (2 Regulated) | 24V DC | 120 scfm @ 100 psi | 0-120 | 145 | 120° | 5 | IEC Zone 2 Groups IIC, IIB, IIA IP65 | 7" | 5 3/4" | 0000000 | 000000 | 0000000 | 00000 |