1-Outlet Compressed Air Regulator Manifolds

Filter by

Inlet Pipe Size

Gauge Included

Outlet Pipe Size

Maximum Pressure Regulation

Number of Outlets

Inlet Thread Type

Pipe Size

Component

Outlet Thread Type

Outlet Regulation

Thread Type

Minimum Pressure Regulation

Fitting Connection

Inlet Connection

Manufacturer Series

Inlet Gender

Manufacturer

Maximum Flow Rate @ Pressure

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

REACH

RoHS

Compliant with Exemptions

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Series Number

Outlet Connection

Housing Material

115 Products

About Air Preparation

Customize your air preparation system with dryers, filters, and other purifying parts.

Norgren Modular Compressed Air Regulator Manifolds

Connect two or more of these regulator manifolds to meet multiple pressure requirements from a single air supply—set a different output pressure with each manifold. Each manifold has two regulated outlets and one unregulated outlet. All are relieving regulators, so they exhaust when the downstream pressure exceeds the set pressure. Install in your air line after filters.

Filter/Regulator/Lubricator Joiner Clamps—Joiner clamps (sold separately) connect regulator manifolds to each other and other Norgren modular components with the same series number. They come with mounting brackets.

Filter/Regulator/Lubricator End Block Sets—End block sets (sold separately) allow you to swap out filter/regulator/lubricator components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them.

	Compressed Air Regulator Manifolds												Filter/Regulator/Lubricator Joiner Clamps		Filter/Regulator/Lubricator End Block Sets
							Overall
	Mfr. Series	Inlet Pipe Size	Outlet Pipe Size (No. of Outlets)	Max. Flow Rate @ Pressure	Max. Pressure, psi	Gauge Included	Wd.	Ht.	Max. Temp., ° F	Choose Pressure Regulation, psi		Each		Each		Each
Zinc Alloy Housing







				Series No. 72—NPT Female Inlet and Outlets

				R72	1/4	1/4 (1 Unregulated), 1/4 (1 Regulated), 1/8 (1 Regulated)	83 ft³/min @ 150 psi	300	Yes	2"	4 1/4"	150	5 to 60, 5 to 150	4822K1	000000	7390K1	000000	4822K41	000000


				R72	3/8	3/8 (1 Unregulated), 1/4 (1 Regulated), 1/8 (1 Regulated)	83 ft³/min @ 150 psi	300	Yes	2"	4 1/4"	150	5 to 60, 5 to 150	4822K2	00000	7390K1	00000	4822K42	00000


				Aluminum Housing







								Series No. 74—NPT Female Inlet and Outlets

								R74	1/2	1/2 (1 Unregulated), 1/2 (1 Regulated), 1/8 (1 Regulated)	160 scfm @ 100 psi	300	Yes	3 1/8"	6 5/8"	175	5 to 150	4822K152	000000	7390K2	00000	7390K33	00000


								R74	3/4	3/4 (1 Unregulated), 1/2 (1 Regulated), 1/8 (1 Regulated)	160 scfm @ 100 psi	300	Yes	3 1/8"	6 5/8"	175	5 to 150	4822K603	000000	7390K2	00000	7390K34	00000

Brackets

Mounting brackets allow you to attach regulator manifolds to a wall or equipment.

		Each
Mounting Bracket for Series No. 74 Regulator Manifolds	4910K98	000000
Mounting Bracket for Series No. 72 Regulator Manifolds	4957K63	00000

Wilkerson Modular Compressed Air Regulator Manifolds

Connect two or more of these regulator manifolds to meet multiple pressure requirements from a single air supply—set a different output pressure with each manifold. Each manifold has one unregulated outlet, one regulated outlet, and an additional port that can be used for a pressure gauge. All are relieving regulators, so they exhaust when the downstream pressure exceeds the set pressure. Install in your air line after filters.

19 Series—Gauges are not included with Series No. 19 manifold regulators.

Filter/Regulator/Lubricator Joiner Clamps—Joiner clamps (sold separately) connect regulator manifolds to each other and other Wilkerson modular components with the same series number. They come with mounting brackets to attach the regulator to a wall or equipment.

	Compressed Air Regulator Manifolds													Filter/Regulator/Lubricator Joiner Clamps		Filter/Regulator/Lubricator End Block Sets
							Overall
	Mfr. Series	Inlet Pipe Size	Outlet Pipe Size (No. of Outlets)	Max. Flow Rate @ Pressure	Max. Pressure, psi	Gauge Included	Wd.	Ht.	Max. Temp., ° F	Regulating Accuracy	Choose Pressure Regulation, psi		Each		Each		Each
Aluminum Housing







				Series No. 09—NPT Female Inlet and Outlets

				R09	1/4	1/4 (1 Unregulated), 1/8 (1 Regulated)	64 scfm @ 100 psi	300	Yes	1 5/8"	4 1/8"	150	±3%	0 to 30, 0 to 60, 0 to 125	4927K261	000000	60115K21	00000	60115K25	000000




						Series No. 19—NPT Female Inlet and Outlets

						R19	1/4	1/4 (1 Unregulated), 1/4 (1 Regulated)	54 scfm @ 24 psi	300	No	2 3/8"	5 1/2"	150	±3%	0 to 30	4927K611	00000	60115K22	00000	60115K7	00000


						R19	1/4	1/4 (1 Unregulated), 1/4 (1 Regulated)	82 scfm @ 48 psi	300	No	2 3/8"	5 1/2"	150	±3%	0 to 60	4927K612	00000	60115K22	00000	60115K7	00000
						R19	1/4	1/4 (1 Unregulated), 1/4 (1 Regulated)	94 scfm @ 100 psi	300	No	2 3/8"	5 1/2"	150	±3%	0 to 125	4927K613	00000	60115K22	00000	60115K7	00000
						R19	1/4	1/4 (1 Unregulated), 1/4 (1 Regulated)	132 scfm @ 100 psi	300	No	2 3/8"	5 1/2"	150	±3%	0 to 250	4927K614	00000	60115K22	00000	60115K7	00000
						R19	3/8	3/8 (1 Unregulated), 1/4 (1 Regulated)	54 scfm @ 24 psi	300	No	2 3/8"	5 1/2"	150	±3%	0 to 30	4927K615	00000	60115K22	00000	60115K26	00000
						R19	3/8	3/8 (1 Unregulated), 1/4 (1 Regulated)	82 scfm @ 48 psi	300	No	2 3/8"	5 1/2"	150	±3%	0 to 60	4927K616	00000	60115K22	00000	60115K26	00000
						R19	3/8	3/8 (1 Unregulated), 1/4 (1 Regulated)	94 scfm @ 100 psi	300	No	2 3/8"	5 1/2"	150	±3%	0 to 125	4927K617	00000	60115K22	00000	60115K26	00000
						R19	3/8	3/8 (1 Unregulated), 1/4 (1 Regulated)	132 scfm @ 100 psi	300	No	2 3/8"	5 1/2"	150	±3%	0 to 250	4927K618	00000	60115K22	00000	60115K26	00000
						R19	1/2	1/2 (1 Unregulated), 1/4 (1 Regulated)	54 scfm @ 24 psi	300	No	2 3/8"	5 1/2"	150	±3%	0 to 30	4927K711	00000	60115K22	00000	60115K27	00000
						R19	1/2	1/2 (1 Unregulated), 1/4 (1 Regulated)	82 scfm @ 48 psi	300	No	2 3/8"	5 1/2"	150	±3%	0 to 60	4927K712	00000	60115K22	00000	60115K27	00000
						R19	1/2	1/2 (1 Unregulated), 1/4 (1 Regulated)	94 scfm @ 100 psi	300	No	2 3/8"	5 1/2"	150	±3%	0 to 125	4927K713	00000	60115K22	00000	60115K27	00000


						R19	1/2	1/2 (1 Unregulated), 1/4 (1 Regulated)	132 scfm @ 100 psi	300	No	2 3/8"	5 1/2"	150	±3%	0 to 250	4927K714	00000	60115K22	00000	60115K27	00000

SMC Modular Compressed Air Regulator Manifolds

Four Manifolds

(Each Sold

Separately)

Image of Product. Front orientation. Contains Annotated. Compressed Air Regulator Manifolds. SMC Modular Compressed Air Regulator Manifolds.

Connect two or more of these regulator manifolds to meet multiple pressure requirements from a single air supply—set a different output pressure with each manifold. Use joiner clamps (sold separately) to connect them to other SMC units of the same series, so you can customize your air preparation system. These manifolds come with one regulated outlet on their back and one unregulated outlet. All are relieving regulators, so they exhaust when the downstream pressure exceeds the set pressure. Install them in your air line after filters.

Filter/Regulator/Lubricator Joiner Clamps—Joiner clamps (sold separately) create compact, airtight connections between components. These clamps come with mounting brackets.

Compressed Air Regulator Manifold End Caps—End caps (sold separately) seal off any unused pipe ports on SMC modular systems. They attach with a joiner clamp (not included).

Brackets—Mounting brackets (sold separately) allow you to attach regulator manifolds to a wall or equipment.

	Compressed Air Regulator Manifolds													Filter/Regulator/Lubricator Joiner Clamps		Filter/Regulator/Lubricator End Block Sets		Compressed Air Regulator Manifold End Caps		Brackets
							Overall
	Mfr. Series	Inlet Pipe Size	Outlet Pipe Size (No. of Outlets)	Max. Flow Rate @ Pressure	Max. Pressure, psi	Gauge Included	Wd.	Ht.	Housing Material	Max. Temp., ° F	Pressure Regulation Range, psi		Each		Each		Each		Each		Each
Series No. 20







				NPT Female Inlet and Outlets

				AR20M-D	1/8	1/8 (1 Unregulated), 1/8 (1 Regulated)	52 scfm @ 100 psi	145	Yes	2 3/16"	3 11/16"	Aluminum	140	7.25 to 123	9417N11	000000	8210N111	00000	8763N11	000000	9417N41	00000	8812K61	00000


				AR20M-D	1/4	1/4 (1 Unregulated), 1/4 (1 Regulated)	52 scfm @ 100 psi	145	Yes	2 3/16"	3 11/16"	Aluminum	140	7.25 to 123	9417N12	00000	8210N111	0000	8763N12	00000	9417N41	0000	8812K61	0000




						BSPP Female Inlet and Outlets

						AR20M-D	1/8	1/8 (1 Unregulated), 1/8 (1 Regulated)	52 scfm @ 100 psi	145	Yes	2 3/16"	3 11/16"	Aluminum	140	7.25 to 123	9417N21	00000	8210N111	0000	8763N24	00000	9417N41	0000	8812K61	0000


						AR20M-D	1/4	1/4 (1 Unregulated), 1/4 (1 Regulated)	52 scfm @ 100 psi	145	Yes	2 3/16"	3 11/16"	Aluminum	140	7.25 to 123	9417N22	00000	8210N111	0000	8763N25	00000	9417N41	0000	8812K61	0000




								BSPT Female Inlet and Outlets

								AR20M-D	1/8	1/8 (1 Unregulated), 1/8 (1 Regulated)	52 scfm @ 100 psi	145	Yes	2 3/16"	3 11/16"	Aluminum	140	7.25 to 123	9417N31	00000	8210N111	0000	8763N31	00000	9417N41	0000	8812K61	0000


								AR20M-D	1/4	1/4 (1 Unregulated), 1/4 (1 Regulated)	52 scfm @ 100 psi	145	Yes	2 3/16"	3 11/16"	Aluminum	140	7.25 to 123	9417N32	00000	8210N111	0000	8763N32	00000	9417N41	0000	8812K61	0000


								Series No. 30







												NPT Female Inlet and Outlets

												AR30M-D	1/4	1/4 (1 Unregulated), 1/4 (1 Regulated)	70 scfm @ 100 psi	145	Yes	2 1/16"	4 5/8"	Aluminum	140	7.25 to 123	9417N13	00000	8210N112	0000	8763N14	00000	9417N42	0000	8812K63	0000


												AR30M-D	3/8	3/8 (1 Unregulated), 1/4 (1 Regulated)	70 scfm @ 100 psi	145	Yes	2 1/16"	4 5/8"	Aluminum	140	7.25 to 123	9417N14	00000	8210N112	0000	8763N15	00000	9417N42	0000	8812K63	0000




														BSPP Female Inlet and Outlets

														AR30M-D	1/4	1/4 (1 Unregulated), 1/4 (1 Regulated)	70 scfm @ 100 psi	145	Yes	2 1/16"	4 5/8"	Aluminum	140	7.25 to 123	9417N23	00000	8210N112	0000	8763N26	00000	9417N42	0000	8812K63	0000


														AR30M-D	3/8	3/8 (1 Unregulated), 1/4 (1 Regulated)	70 scfm @ 100 psi	145	Yes	2 1/16"	4 5/8"	Aluminum	140	7.25 to 123	9417N24	00000	8210N112	0000	8763N27	00000	9417N42	0000	8812K63	0000




																BSPT Female Inlet and Outlets

AR30M-D	1/4															1/4 (1 Unregulated), 1/4 (1 Regulated)	70 scfm @ 100 psi	145	Yes	2 1/16"	4 5/8"	Aluminum	140	7.25 to 123	9417N33	00000	8210N112	0000	8763N33	00000	9417N42	0000	8812K63	0000


AR30M-D	3/8															3/8 (1 Unregulated), 1/4 (1 Regulated)	70 scfm @ 100 psi	145	Yes	2 1/16"	4 5/8"	Aluminum	140	7.25 to 123	9417N34	00000	8210N112	0000	8763N34	00000	9417N42	0000	8812K63	0000


Series No. 40







																NPT Female Inlet and Outlets

				AR40M-D	3/8											3/8 (1 Unregulated), 3/8 (1 Regulated)	141 scfm @ 100 psi	145	Yes	2 3/4"	5"	Aluminum	140	7.25 to 123	9417N15	00000	8210N113	0000	8763N18	00000	9417N43	0000	8812K64	0000


				AR40M-D	1/2											1/2 (1 Unregulated), 3/8 (1 Regulated)	141 scfm @ 100 psi	145	Yes	2 3/4"	5"	Aluminum	140	7.25 to 123	9417N16	00000	8210N113	0000	8763N19	00000	9417N43	0000	8812K64	0000




																BSPP Female Inlet and Outlets

						AR40M-D	3/8									3/8 (1 Unregulated), 3/8 (1 Regulated)	141 scfm @ 100 psi	145	Yes	2 3/4"	5"	Aluminum	140	7.25 to 123	9417N25	00000	8210N113	0000	8763N28	00000	9417N43	0000	8812K64	0000


						AR40M-D	1/2									1/2 (1 Unregulated), 3/8 (1 Regulated)	141 scfm @ 100 psi	145	Yes	2 3/4"	5"	Aluminum	140	7.25 to 123	9417N26	00000	8210N113	0000	8763N29	00000	9417N43	0000	8812K64	0000




																BSPT Female Inlet and Outlets

								AR40M-D								3/8	3/8 (1 Unregulated), 3/8 (1 Regulated)	141 scfm @ 100 psi	145	Yes	2 3/4"	5"	Aluminum	140	7.25 to 123	9417N35	00000	8210N113	0000	8763N35	00000	9417N43	0000	8812K64	0000


								AR40M-D	1/2							1/2 (1 Unregulated), 3/8 (1 Regulated)	141 scfm @ 100 psi	145	Yes	2 3/4"	5"	Aluminum	140	7.25 to 123	9417N36	00000	8210N113	0000	8763N36	00000	9417N43	0000	8812K64	0000

Parker Modular Compressed Air Regulator Manifolds


Four Manifolds Shown Connected (Each Sold Separately)

Join two or more of these regulator manifolds to power multiple tools or machines from a single air supply—you can set a different output pressure on each one. Connect them to other Parker components in the same series with joiner clamps (sold separately) to customize your air preparation system. These manifolds come with one regulated outlet on their back and one unregulated outlet. All are relieving regulators, so they exhaust when the downstream pressure exceeds the set pressure. Install them in your air line after filters.

Filter/Regulator/Lubricator Joiner Clamps—Joiner clamps (sold separately) create compact, airtight connections between components. These clamps come with mounting brackets.

Brackets—Mounting brackets (sold separately) allow you to attach regulator manifolds to a wall or equipment.

	Compressed Air Regulator Manifolds													Filter/Regulator/Lubricator Joiner Clamps		Brackets
							Overall
	Mfr. Series	Inlet Pipe Size	Outlet Pipe Size (No. of Outlets)	Max. Flow Rate @ Pressure	Max. Pressure, psi	Gauge Included	Wd.	Ht.	Max. Temp., ° F	Regulating Accuracy	Choose Pressure Regulation, psi		Each		Each		Each
Aluminum Housing







				Series No. P31—NPT Female Inlet and Outlets

				P31	1/4	1/4 (1 Unregulated), 1/8 (1 Regulated)	64 scfm @ 145 psi	300	Yes	1 5/8"	4"	150	±3 psi	0 to 125	8392N11	000000	8486T111	00000	6746K82	00000




						Series No. P32—NPT Female Inlet and Outlets

						P32	1/4	1/4 (1 Unregulated), 1/4 (1 Regulated)	94 scfm @ 145 psi	300	Yes	2 3/8"	5 5/8"	150	±3 psi	0 to 60, 0 to 125, 0 to 250	8392N21	00000	8486T271	00000	3109N231	0000


						P32	3/8	3/8 (1 Unregulated), 1/4 (1 Regulated)	94 scfm @ 145 psi	300	Yes	2 3/8"	5 5/8"	150	±3 psi	0 to 125, 0 to 250	8392N22	00000	8486T271	00000	3109N231	0000
						P32	1/2	1/2 (1 Unregulated), 1/4 (1 Regulated)	94 scfm @ 145 psi	300	Yes	2 3/8"	5 5/8"	150	±3 psi	0 to 125, 0 to 250	8392N23	00000	8486T271	00000	3109N231	0000

Manifolds for Parker Modular Compressed Air Filter/Regulator/Lubricators (FRLs)


For P32 Series	For P33 Series	For P3Y Series

Distribute compressed air to multiple locations from a single source. These manifolds connect with Parker modular components that have the same manufacturer series.

Filter/Regulator/Lubricator Joiner Clamps—Use joiner clamps to connect manifolds to another Parker modular unit with the same series number.

	Compressed Air Filter/Regulator/Lubricator Manifolds												Filter/Regulator/Lubricator Joiner Clamps
	For Mfr. Series	Total No. of Outlets	Inlet Pipe Size (No. of)	Outlet Pipe Size (No. of)	Max. Pressure, psi	Max. Temp., ° F	Lg.	Wd.	Ht.	Material		Each		Each
NPT Inlets and Outlets



		P32	3	1/2 (1)	1/2 (2), 1/4 (1)	300	150	2 3/8"	1 7/8"	1 7/8"	Aluminum	8561N23	000000	8486T271	000000


		P33	3	3/4 (1)	3/4 (1), 1/2 (1), 1/4 (1)	300	150	2 7/8"	2 5/8"	1 7/8"	Aluminum	8561N24	00000	8486T271	00000
		P3Y	5	1 (1)	1 (1), 3/4 (1), 1/4 (2), 1/8 (1)	250	140	3 1/8"	2 5/8"	2 5/8"	Aluminum	8561N25	00000	8486T27	00000

Compressed Air Filter/Regulator Manifolds

Supply multiple locations with clean, compressed air at different pressures. These manifolds distribute air from a single supply through regulators with their own pressure controls, so you can adjust each one separately. Regulated air is diverted through an outlet on the back of each regulator, while unregulated air continues through the main line. To control air pressure on the main line, add a standard regulator. All regulators on these manifolds are relieving, so they exhaust when downstream pressure exceeds the set pressure.

									Overall
	No. of Stations	Inlet Pipe Size	Outlet Pipe Size (No. of Outlets)	Max. Flow Rate @ Pressure	Pressure Regulation Range, psi	Max. Pressure, psi	Max. Temp., ° F	Removes Particle Size Down To, μm	Wd.	Ht.		Each
NPT Female Inlet and Outlet







				Clear Bowl with Automatic Drain

				2	1/4	1/4 (1 Unregulated), 1/4 (2 Regulated)	98 scfm @ 100 psi	7.25 to 123	145	140	5	6 5/8"	8 5/16"	8526N11	0000000


				2	1/2	1/2 (1 Unregulated), 3/8 (2 Regulated)	148 scfm @ 100 psi	7.25 to 123	145	140	5	8 11/16"	9 11/16"	8526N12	000000
				4	1/4	1/4 (1 Unregulated), 1/4 (4 Regulated)	98 scfm @ 100 psi	7.25 to 123	145	140	5	11 1/8"	8 5/16"	8526N13	000000
				4	1/2	1/2 (1 Unregulated), 3/8 (4 Regulated)	148 scfm @ 100 psi	7.25 to 123	145	140	5	14 5/8"	9 11/16"	8526N14	000000
				6	1/4	1/4 (1 Unregulated), 1/4 (6 Regulated)	98 scfm @ 100 psi	7.25 to 123	145	140	5	15 5/8"	8 5/16"	8526N15	000000
				6	1/2	1/2 (1 Unregulated), 3/8 (6 Regulated)	148 scfm @ 100 psi	7.25 to 123	145	140	5	20 1/2"	9 11/16"	8526N16	000000
				8	1/4	1/4 (1 Unregulated), 1/4 (8 Regulated)	98 scfm @ 100 psi	7.25 to 123	145	140	5	20 1/8"	8 5/16"	8526N17	000000
				8	1/2	1/2 (1 Unregulated), 3/8 (8 Regulated)	148 scfm @ 100 psi	7.25 to 123	145	140	5	26 7/16"	9 11/16"	8526N18	000000

Space-Saving Compressed Air Filter/Regulator Manifolds

Image of Product. Front orientation. Contains Annotated. Compressed Air Filter/Regulator Manifolds. Space-Saving Compressed Air Filter/Regulator Manifolds.

Minimize the footprint of your air preparation system with these all-in-one manifolds—they include a filter, a regulator, a slow-start valve, and a safety lockout valve. Use them to distribute clean, compressed air to up to four locations. Three regulated outlets provide air at the same set pressure, and one unregulated outlet provides high-pressure air for blow guns and other tools. All controls are on the front panel, so you don’t need clearance above or below these manifolds to make adjustments. Since the inlet and outlet ports swivel until tightened, you can connect to your air line without rotating the manifold.

The filter removes both particles and water, and it has an indicator to let you know when the filter element needs to be replaced. The regulator is relieving, so it will exhaust when the downstream pressure exceeds the set pressure. To protect sensitive components from hard starts and surges, the slow-start air-exhaust valve eases pressure into your system. The safety lockout valve keeps the system from starting up during maintenance—lock it with the included padlock and key.

24V DC—Manifolds that operate on 24V DC have LEDs that indicate if the pressure is above or below your set pressure and if the air supply is on or off. They are ATEX certified for use in hazardous locations.

IP65 Enclosure Rating—These manifolds are rated IP65 for protection from dust and low-pressure jets of water. When the _1/4 NPT outlets are not in use, cover them with the included threaded plugs to maintain this rating.

	Compressed Air Filter/Regulator Manifolds														Replacement Filter Elements
											Overall
	Inlet Pipe Size	Outlet Pipe Size (No. of Outlets)	Voltage, V DC	Max. Flow Rate @ Pressure	Pressure Regulation Range, psi	Max. Pressure, psi	Max. Temp., ° F	Removes Particle Size Down To, μm	Hazardous Location Rating	Enclosure Rating	Wd.	Ht.		Each		Each
NPT Female Inlet and Outlet







				Clear Bowl with Automatic Drain

				3/8	3/8 (1 Regulated), 1/4 (1 Unregulated), 1/4 (2 Regulated)	—	120 scfm @ 100 psi	0 to 120	145	120	5	—	IP65	7"	5 3/4"	8628T1	0000000	8628T21	000000


				3/8	3/8 (1 Regulated), 1/4 (1 Unregulated), 1/4 (2 Regulated)	24	120 scfm @ 100 psi	0 to 120	145	120	5	ATEX II 3 G Ex nA IIC T5 Gc; IEC Zone 2 Groups IIC, IIB, IIA	IP65	7"	5 3/4"	8628T11	000000	8628T21	00000
				1/2	1/2 (1 Regulated), 1/4 (1 Unregulated), 1/4 (2 Regulated)	—	145 scfm @ 100 psi	0 to 120	145	120	5	—	IP65	7"	5 3/4"	8628T2	000000	8628T21	00000
				1/2	1/2 (1 Regulated), 1/4 (1 Unregulated), 1/4 (2 Regulated)	24	145 scfm @ 100 psi	0 to 120	145	120	5	ATEX II 3 G Ex nA IIC T5 Gc; IEC Zone 2 Groups IIC, IIB, IIA	IP65	7"	5 3/4"	8628T12	000000	8628T21	00000

Manifolds for SMC Modular Compressed Air Filter/Regulator/Lubricators (FRLs)


Manifolds	Manifolds with 2 Gauge Ports

Distribute compressed air to multiple locations from a single source. These manifolds connect with SMC modular components that have the same manufacturer series.

Filter/Regulator/Lubricator Joiner Clamps—Use joiner clamps to connect manifolds to another SMC modular unit with the same series number.

	Compressed Air Filter/Regulator/Lubricator Manifolds															Filter/Regulator/Lubricator Joiner Clamps
				Branching Outlet		Gauge Ports
	For Mfr. Series	Total No. of Outlets	No. of Inline Outlets	Pipe Size (No. of)	Thread Type	Pipe Size	Thread Type	Max. Pressure, psi	Max. Temp., ° F	Lg.	Wd.	Ht.	Material		Each		Each
Manifolds



		AC20-D	2	1	1/8 (1)	NPT	—	—	145	140	1 11/16"	1 1/8"	1 7/16"	Aluminum	8205N111	000000	8210N111	00000


		AC20-D	2	1	1/4 (1)	NPT	—	—	145	140	1 11/16"	1 1/8"	1 7/16"	Aluminum	8205N112	00000	8210N111	0000
		AC30-D	2	1	1/4 (1)	NPT	—	—	145	140	2 1/8"	1 1/4"	1 3/4"	Aluminum	8205N113	00000	8210N112	0000
		AC30-D	2	1	3/8 (1)	NPT	—	—	145	140	2 1/8"	1 1/4"	1 3/4"	Aluminum	8205N114	00000	8210N112	0000
		AC40-D	2	1	3/8 (1)	NPT	—	—	145	140	2 13/16"	1 9/16"	2 1/16"	Aluminum	8205N115	00000	8210N113	0000
		AC40-D	2	1	1/2 (1)	NPT	—	—	145	140	2 13/16"	1 9/16"	2 1/16"	Aluminum	8205N116	00000	8210N113	0000
		AC50-D, AC60-D	2	1	3/4 (1)	NPT	—	—	145	140	3 9/16"	2 1/2"	2 9/16"	Aluminum	8205N117	00000	8210N115	00000


		Manifolds with 2 Gauge Ports



				AC20-D	3	1	1/8 (2)	NPT	1/8	NPT	145	140	1 11/16"	1 1/8"	1 7/16"	Aluminum	8205N118	0000	8210N111	0000


				AC20-D	3	1	1/4 (2)	NPT	1/8	NPT	145	140	1 11/16"	1 1/8"	1 7/16"	Aluminum	8205N119	0000	8210N111	0000
				AC30-D	3	1	1/4 (2)	NPT	1/8	NPT	145	140	2 1/8"	1 1/4"	1 3/4"	Aluminum	8205N121	0000	8210N112	0000
				AC30-D	3	1	3/8 (2)	NPT	1/8	NPT	145	140	2 1/8"	1 1/4"	1 3/4"	Aluminum	8205N122	0000	8210N112	0000
				AC40-D	3	1	3/8 (2)	NPT	1/8	NPT	145	140	2 13/16"	1 9/16"	2 1/16"	Aluminum	8205N123	0000	8210N113	0000
				AC40-D	3	1	1/2 (2)	NPT	1/8	NPT	145	140	2 13/16"	1 9/16"	2 1/16"	Aluminum	8205N124	0000	8210N113	0000