About Air Preparation
More
High-Flow Compressed Air Separators
These separators have higher flow rates compared to our other compressed air separators. Prevent equipment damage and wear caused by moisture in your compressed air supply. The first step in water removal, use one of these separators to remove the large amount of water created as compressed air cools. A float-operated drain valve automatically opens when the bowl begins to fill. Install separators in your air line after compressors and aftercoolers..
Pipe Size | Overall | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Inlet | Outlet | Connections | Max. Flow Rate | Max. Pressure, psi | Max. Temp., °F | Ht. | Wd. | Dp. | Each | |
Aluminum Housing | ||||||||||
| 1 1/2 | 1 1/2 | NPT Female | 742 scfm @ 100 psi | 232 | 149° | 17 3/8" | 6 1/2" | 3 1/8" | 00000000 | 0000000 |
Compressed Air Filters for Particle Removal
Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air. Filters have a clear bowl or a sight glass so you can see inside to monitor contents.
Filters with an automatic drain are good for use in air lines with high water content.
BSPP threads are also known as G threads. BSPT threads are also known as R threads.
Mounting brackets allow you to attach the filter to a wall or equipment.
For technical drawings and 3-D models, click on a part number.
Filters | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
O'all | Replacement Filter Elements | Mounting Brackets | |||||||||
| Pipe Size | Max. Flow Rate | Max. Pressure, psi | Removes Particle Size Down To, microns | Ht. | Wd. | Each | Each | Each | |||
Aluminum Bowl—Opaque with Sight Glass and Automatic Drain | |||||||||||
| 1 1/2 | 298 scfm @ 100 psi | 250 | 5 | 11 3/8" | 4 3/4" | 0000000 | 0000000 | 0000000 | 000000 | 0000000 | 0000000 |
Aluminum Bowl—Opaque with Sight Glass and Manual Drain | |||||||||||
| 1 1/2 | 298 scfm @ 100 psi | 250 | 5 | 11 7/8" | 4 3/4" | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 000000 |
Heavy Duty Compressed Air Filters for Particle Removal
Use these filters where high water and dirt removal is needed—they have a two-layer filter element made of stainless steel wire mesh and cotton/polyester packing. Filters clean your compressed air to extend the service life of air-powered tools and equipment.
For technical drawings and 3-D models, click on a part number.
Filters | |||||||||
|---|---|---|---|---|---|---|---|---|---|
O'all | Replacement Filter Elements | ||||||||
| Pipe Size | Max. Flow Rate | Max. Pressure, psi | Removes Particle Size Down To, microns | Ht. | Wd. | Each | Each | ||
NPT Female Inlet and Outlet | |||||||||
| 1 1/2 | 400 scfm @ 100 psi | 150 | 3 | 32" | 8" | 00000000 | 000000000 | 00000000 | 0000000 |
| Replacement Automatic Drain for 1 1/4, 1 1/2, and 2 NPT Pipe Size Filters | 00000000 | Each | 0000000 |
Two-Stage Compressed Air Filters for Coarse and Fine Particle Removal
Get two stages of filtration—the first stage removes most particles and water droplets; the second captures any remaining particles and water droplets down to 5 microns. Use these filters to clean your compressed air to extend the service life of air-powered tools and equipment.
Replacement filter element kits include first- and second-stage filter elements, a base core, a base gasket, and four cap gaskets.
For technical drawings and 3-D models, click on a part number.
Desiccant Compressed Air Dryer/Filters for Oil and Particle Removal
These dryer/filters have a clay desiccant that removes moisture, oil, and particles, so there’s no need to install a separate filter and dryer. Once aftercoolers and separators have removed the bulk of the water, they remove any remaining moisture in your air line. Dryer/filters have a clear bowl or sight glass that allow you to see inside to monitor the contents. When the desiccant becomes saturated, it changes color to indicate that it should be replaced.
Dryer/filters with an aluminum bowl stand up to synthetic compressor lubricants and solvents better than dyers with an acrylic plastic bowl can.
For technical drawings and 3-D models, click on a part number.
Dryer/Filters | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inlet | Outlet | Overall | Replacement Desiccant | ||||||||||
| Pipe Size | Connection | Pipe Size | Connection | Max. Flow Rate | Max. Pressure, psi | Max. Temp., °F | Housing Material | Dia. | Ht. | Each | Each | ||
Acrylic Plastic Bowl—Clear | |||||||||||||
| 1 1/2 | NPT Female | 1 1/2 | NPT Female | 100 scfm @ 100 psi | 150 | 150° | Aluminum | 8" | 21 3/4" | 0000000 | 000000000 | 0000000 | 0000000 |
Aluminum Bowl—Opaque with Sight Glass | |||||||||||||
| 1 1/2 | NPT Female | 1 1/2 | NPT Female | 100 scfm @ 100 psi | 250 | 150° | Aluminum | 8" | 21 3/4" | 000000 | 00000000 | 0000000 | 000000 |
Desiccant Compressed Air Dryers
Once aftercoolers and separators have removed the bulk of the water, use these dryers to remove any remaining moisture in your air line. To reuse saturated desiccant, heat it at its reactivation temperature until it returns to its dry desiccant color. Install after an oil filter to protect the desiccant.
Dryers with a clear bowl and dryers with a sight glass allow you to see inside to monitor contents.
Dryers with a metal bowl are more durable and stand up to vapor better than dryers with a plastic bowl.
For technical drawings and 3-D models, click on a part number.