Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air. Filters have a clear bowl so you can see inside to monitor contents.

Filters with an automatic drain are good for use in air lines with high water content.

Joiner clamps (sold separately) connect the filter to another SMC modular component with the same series number. They come with mounting brackets to attach the filter to a wall or equipment.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air. Customize your air preparation solution by connecting these modular units to other Aventics units of the same series. Use clamps to make compact and airtight connections that you can easily swap out. These filters have a drain that empties automatically when the system is depressurized, such as when the air is turned off at night. You can also manually empty the drain. They have a clear bowl so you can see inside to monitor its contents.

Joiner clamps (sold separately) connect the filter to another Aventics modular component with the same series number. They come with mounting brackets.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air. These air filters connect to other ARO units of the same series so you can customize your air preparation system. They join with clamped connections that are compact, airtight, and easy to swap out. A clear bowl or a sight glass lets you see inside to monitor their contents.

Joiner clamps (sold separately) connect the filter to another ARO modular component with the same series number. They come with mounting brackets to attach the filter to a wall or equipment.

End block sets (sold separately) allow you to swap out filter/regulator/lubricator components without unthreading your air line connections. The blocks stay connected to your pipes when you need to replace the components between them.

Assembled, inspected, and packaged in a clean environment, these filters come sealed in antistatic double bags. They extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air. A clear bowl lets you see inside to monitor contents. Run a tube from the open drain port to a disposal point such as a drain pan or waste system.

Protect small air-powered tools, such as impact wrenches, ratchet wrenches, grinders, and screwdrivers. Thread these filters onto an air hose and attach them directly to the tool to remove particles from your compressed air line.

Reversible filters can be installed with either end as the inlet or outlet—they work with air flowing in either direction. If you plan to switch the direction of flow, replace the element first. This prevents trapped particles from being released into the filtered air.

No need to buy and service two filters—these filters have a single element that removes both oil and particles. Use them to remove water droplets as well as oil and particles from compressed air to extend the service life of your air-powered tools and equipment. They have a drain that empties automatically when the system is depressurized, such as when the air is turned off at night. You can also manually empty the drain. These filters have a clear bowl so you can see inside to monitor the contents.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment. To prevent clogs, install a particle filter before the oil filter.

Filters with a clear bowl or a sight glass allow you to see inside the bowl to monitor contents.

Mounting brackets allow you to attach the filter to a wall or equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment. Customize your air preparation solution by connecting these modular units to other Aventics units of the same series. Compact and airtight connections can be made and easily swapped out using clamps. These filters have a drain that empties automatically when the system is depressurized, such as when the air is turned off at night. You can also manually empty the drain. A clear bowl lets you see inside so you can monitor its contents. As the filter clogs, a filter service indicator turns increasingly red, letting you know when the filter elements need to be replaced. To prevent clogs, install a particle filter before the oil filter.

Joiner clamps (sold separately) connect the filter to another Aventics modular component with the same series number. They come with mounting brackets.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment. Filters have a clear bowl so you can see inside to monitor contents. To prevent clogs, install a particle filter before the oil filter.

Joiner clamps (sold separately) connect the filter to another SMC modular component with the same series number. They come with mounting brackets to attach the filter to a wall or equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment. These air filters connect to other ARO units of the same series so you can customize your air preparation system. They join with clamped connections that are compact, airtight, and easy to swap out. A clear bowl or a sight glass lets you see inside to monitor their contents. To prevent clogs, install a particle filter before the oil filter.

Joiner clamps (sold separately) connect the filter to another ARO modular component with the same series number. They come with mounting brackets to attach the filter to a wall or equipment.

End block sets (sold separately) allow you to swap out filter/regulator/lubricator components without unthreading your air line connections. The blocks stay connected to your pipe while you replace components between them.

A polyurethane bowl offers good chemical resistance for use with synthetic compressor oils and aggressive cleaning agents. It’s clear so you can see inside to monitor contents. Also known as coalescing filters, these filters remove oil from compressed air to extend the service life of air-powered tools and equipment. To prevent clogs, install a particle filter before the oil filter.

Use these filters in applications where high-quality air is critical. They remove particles down to 0.003 microns, eliminating small traces of oil vapor and its associated odor. Install these filters as one of the last steps in your air preparation system—after your main filters for oil and particle removal.

Mounting brackets (sold separately) allow you to attach the filter to a wall or equipment.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone. They provide clean compressed air at your required pressure. Regulator is relieving style, so it exhausts when the downstream pressure exceeds the set pressure.

Filters with a clear bowl or an opaque bowl with sight glass allow you to see inside to monitor contents.

Mounting brackets let you attach the filter/regulator to a wall or equipment.

Joiner clamps (sold separately) connect the filter/regulator to another SMC modular component with the same series number. They come with mounting brackets.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone. They provide clean compressed air at your required pressure. Filter has a clear bowl or sight glass so you can see inside to monitor contents. Regulator is relieving style, so it exhausts when the downstream pressure exceeds the set pressure.

Mounting brackets (sold separately) allow you to attach the filter/regulator to a wall or equipment.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone. They provide clean compressed air at your required pressure. Filter has a clear bowl so you can see inside to monitor contents. Regulator is relieving style, so it exhausts when the downstream pressure exceeds the set pressure.

Mounting brackets (sold separately) allow you to attach the filter/regulator to a wall or equipment.

End block sets (sold separately) allow you to swap out filter/regulator/lubricator components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone. They provide clean compressed air at your required pressure. Filter has a clear bowl so you can see inside to monitor contents. The drain can be set to either manual or semi-automatic. Regulator is relieving style, so it exhausts when the downstream pressure exceeds the set pressure.

Mounting brackets (sold separately) allow you to attach the filter/regulator to a wall or equipment.

Joiner clamps (sold separately) connect the filter/regulator to another ASCO Numatics modular component with the same series number. They come with mounting brackets.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone. They provide clean compressed air at your required pressure. Filter has a clear bowl or sight glass so you can see inside to monitor contents. Regulator is relieving style, so it exhausts when the downstream pressure exceeds the set pressure.

Joiner clamps (sold separately) connect the filter/regulator to another ARO modular component with the same series number. They come with mounting brackets to attach the filter/regulator to a wall or equipment.

End block sets (sold separately) allow you to swap out filter/regulator/lubricator components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them.

These filter/regulator combinations come as one convenient unit that cleans the air as it regulates pressure. Regulator is relieving style, so it exhausts when the downstream pressure exceeds the set pressure.

Filters with a clear bowl or sight glass allow you to see inside to monitor contents.

Mounting brackets allow you to attach the filter/regulator to a wall or equipment.

A clear polyurethane bowl makes these filter/regulators chemical resistant for use with synthetic compressor oils and cleaning fluids and allows you to see inside to monitor contents. Joined top-to-bottom, the filter and regulator fit in the same space as a filter alone. They provide clean compressed air at your required pressure. Regulator is relieving style, so it exhausts when the downstream pressure exceeds the set pressure.

Mounting brackets (sold separately) allow you to attach the filter/regulator to a wall or equipment.

Assembled, inspected, and packaged in a clean environment, these filter/regulators come sealed in antistatic double bags. The filter and regulator are joined top-to-bottom to fit in the same space as a filter alone. They provide clean compressed air at your required pressure. The filter has a clear bowl, so you can see inside to monitor contents from every direction. The regulator is relieving style, so it exhausts when the downstream pressure exceeds the set pressure. Run a tube from the open drain port to a disposal point, such as a drain pan or waste system.

Two-stage filtration is like getting two filters in one—the first stage removes large particles, while the second removes fine particles. A two-stage filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone. They provide clean compressed air at your required pressure. Filter has a clear bowl so you can see inside to monitor contents. The drain can be set to either manual or semi-automatic. Regulator is relieving style, so it exhausts when the downstream pressure exceeds the set pressure.

Mounting brackets (sold separately) allow you to attach the filter/regulator to a wall or equipment.

An ARO filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure. Regulator is relieving style, so it exhausts when the downstream pressure exceeds the set pressure. Filter and lubricator have a clear bowl or sight glass so you can monitor the contents inside.

Stacked filter/regulator/lubricators require less horizontal space than inline FRLs. The filter and regulator are joined top-to-bottom with the lubricator on the side.

Mounting brackets allow you to attach the filter/regulator/lubricator to a wall or equipment.

Joiner clamps (sold separately) connect the filter/regulator/lubricator to another ARO modular component with the same series number. They come with mounting brackets.

End block sets (sold separately) allow you to swap out filter/regulator/lubricator components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them.

A filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure. Regulator is relieving style, so it exhausts when the downstream pressure exceeds the set pressure. Filter and lubricator have a clear bowl or sight glass so you can monitor the contents inside.

Stacked filter/regulator/lubricators require less horizontal space than inline FRLs. The filter and regulator are joined top-to-bottom with the lubricator on the side.

Polyurethane bowls are more chemical resistant than polycarbonate bowls for use with synthetic compressor oils.

Mounting brackets allow you to attach the filter/regulator/lubricator to a wall or equipment.