We will reply to your message within an hour.
More
An interlocking steel frame in these mounts prevents collapse, even if the rubber fails.
Connect these mounts to your air supply for vibration and shock isolation in compression load applications.
Spring action provides significant isolation of vibration and noise.
Limit damage during moderate earthquakes.
The polyurethane base on these mounts resists solvents, gasoline, and oil, while the metal plate sustains heavy loads.
Well-suited to moist environments, these mounts have a stainless steel plate for excellent corrosion resistance.
Made of nitrile rubber, these mounts are oil resistant for use in compression load applications with punch presses, milling machines, grinders, and air compressors.
These mounts withstand exposure to weather and resist oil, antifreeze, and other petroleum-based fluids.
A two-piece design makes these mounts easier to install than one-piece mounts.
Made of neoprene rubber, these mounts are oil resistant, so they're good for use under generators, HVAC equipment, electric motors, pumps, and blowers.
Made of tightly layered stainless steel mesh, these mounts withstand temperatures up to 500° F.
Install these mounts with a socket head cap screw—the counterbored hole ensures the screw sits flush with or below the top of the mount.
Designed for tight spaces such as inside machinery, these mounts fit into a cutout, so they so they have a low top profile.
Isolate vibration and noise from oscillating equipment like fans and tumblers that create horizontal (shear) force.
Specifically designed for light vertical loads, these mounts buckle to protect lightweight equipment such as small fans and pumps from vibration.
In addition to having a wider temperature range than our other vibration-damping bushings, these have excellent weather resistance.
Easier to install than grommets, push these bushings through your mounting hole to dampen vibration. Use them with a vibration-damping washer to isolate vibration.
Ribbed bushings are more flexible than our smooth vibration-damping bushings, so they're easier to install.
In addition to having a wider temperature range than our other ribbed vibration-damping bushings, these have excellent weather resistance.
Ribbed grommets are more flexible than our smooth vibration-damping grommets, so they're easier to install.
Press these grommets into a hole to add cushion on both sides.
In addition to having a wider temperature range than our other vibration-damping grommets, these have excellent weather resistance.
In addition to having a wider temperature range than our other vibration-damping washers, these have excellent weather resistance.
Use these in place of normal washers to damp vibration and cushion your joint.
In addition to having a wider temperature range than our other ribbed vibration-damping grommets, these have excellent weather resistance.
Reinforced with fabric so extreme compression won’t deform them, these pads protect surfaces from impact, dampen vibration and noise, and act as stable connection points. They’re commonly known as bearing pads.
Place pads under equipment, such as drill presses, milling machines, saws, and air-conditioning units to minimize vibration and noise transmitted to and from machinery.
Made of nitrile rubber, these pads have excellent resistance to oil and solvents.
These soft pads work well for isolating vibration with light loads such as lab and testing equipment.
Great for use outdoors, these durable pads are neoprene rubber, which withstands exposure to direct sunlight.
Able to shoulder up to 1,500 psi per mounting point, nitrile pads can support heavy machinery.
Made of fiber-reinforced PVC, these pads endure exposure to corrosive chemicals, such as cleaning solvents, chlorine, and hydrochloric acid.
Shield surfaces from impact, reduce vibration and noise, and stabilize connection points with these packs of pads—they’re reinforced with fabric to endure extreme compression without deforming. They’re also known as bearing pads.
Made of tightly layered stainless steel mesh, these pads withstand a wide temperature range from -120° to 500° F.
All-stainless steel construction stands up to water and chemicals and won't rust or corrode.
Higher deflection ratings translate to greater vibration and shock isolation.
Higher deflection ratings translate to greater vibration and shock isolation than our other vibration-damping leveling mounts.
Choose from mounts that support 3,000 to 30,000 lbs. for heavy machinery.
Thread these mounts into machinery to level them on uneven floors in sanitary environments such as food-processing areas.
A two-piece design requires less clearance than one-piece mounts and simplifies installation—raise your machine just enough to slide the base underneath, then insert the stud from above.
Bolt these mounts down to keep your equipment stationary.
A two-piece design simplifies installation and requires less clearance than one-piece mounts.
Keep bumpers of various shapes, materials, and mounting styles on hand to solve whatever problems arise.
A ridge on the stem provides a tighter grip than other push-in bumpers. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.
The stem on these bumpers compresses to fit into tight holes. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.
Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.
For the heaviest loads, these springs have more than double the load capacity of High-Load Fastener-Mount Compression Springs. Secure by inserting a fastener through the hole at the base.
Differently sized mounting holes on either side allow for mounting flexibility.
These springs handle higher loads than standard fastener-mount compression springs. Secure by inserting a fastener through the hole at the base.
Flanges on the ends of these springs provide a flat mounting surface.
Isolate vibration and absorb shock from moving equipment, even with changing loads. Also for leveling and lifting, use compressed air to adjust air springs to the height and force required for your application.
Protect countersunk holes from damage and wear.
These polyurethane washers withstand wet conditions as well as sunlight, ozone, and some chemicals.
Made of Buna-N rubber, these washers offer excellent chemical, weather, and oil resistance. The raised grid pattern prevents sideways shifting.
These SBR rubber washers are reinforced with cloth fibers.
These leather washers are nonmarring.
These wool felt washers can be soaked with oil to lubricate joints.