Computer Hubs | McMaster-Carr

Filter by

Electrical Connection

Mounting Location

Number of USB Connections

Number of Sockets

Transmission Speed

USB Standard

Voltage

Gender

Signal Type

Housing Material

Export Control Classification Number (ECCN)

Width

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Number of Ports

REACH

Height

RoHS

Compliant with Exemptions

Length

DFARS Specialty Metals

Material

Shielding

Number of Terminals

Cord Length

Certification

Maximum Temperature

Minimum Temperature

88 Products

USB Hubs

Connect additional ports to your computer. These hubs can run off a computer’s power. USB ports are backward compatible, so they work with cords and connectors that meet the same or a lower USB standard.

USB-A, 3.2 Gen 1 Male Connection


With Female USB-A Connections	With Female USB-A, DVI-I, Standard HDMI, Ethernet RJ45, and 3.5 mm Audio Stereo Socket Connections

120V AC Adapter—Hubs with a 120 volt AC power adapter can be plugged into an outlet.

Signal Type	Transmission Speed, Gbit/s	Cord Lg., ft.	Color	Housing Material	Lg.	Wd.	Ht.	Includes		Each



USB-A, 3.2 Gen 1 (10)	Data, Power	5	2 1/2	Black	Plastic	7 7/8"	2 3/8"	7/8"	120V AC Adapter	4974T115	0000000

USB-C, 3.2 Gen 1 Male Connection


With Female USB-A, USB-C, Computer HD15, and Ethernet RJ45 Connections	With Female USB-A, USB-C, DVI-I, and Ethernet RJ45 Connections	With Female USB-A, USB-C, and Ethernet RJ45 Connections	With Female USB-A and USB-C Connections

With Female USB-A, USB-C, and Standard HDMI Connections	With Female USB-A, USB-C, Standard HDMI, and Ethernet RJ45 Connections	With Female USB-A Connections	With Female USB-A and Ethernet RJ45 Connections

Shielded—Shielded hubs reduce electrical interference from nearby devices to maintain signal strength.

Signal Type	Transmission Speed, Gbit/s	Cord Lg.	Shielding	Color	Housing Material	Lg.	Wd.	Ht.		Each



USB-A, 3.2 Gen 1 (7)	Data, Power	5	12"	Shielded	Gray	Anodized Aluminum	7 1/4"	1 1/4"	3/4"	7927N16	000000


USB-A, 3.2 Gen 1 (4) USB-C, 3.2 Gen 1 (1)	Data, Power	5	4 1/4"	Shielded	Black	Plastic	3 3/4"	1 1/2"	1/2"	7927N11	00000

USB-C, 3.2 Gen 2 Male Connection


With Female USB-A Connections	With Female USB-A and USB-C Connections

Signal Type	Transmission Speed, Gbit/s	Cord Lg.	Color	Housing Material	Lg.	Wd.	Ht.		Each



USB-A, 3.2 Gen 2 (2) USB-C, 3.2 Gen 2 (2)	Data, Power	10	5 7/8"	Black	Aluminum	2 3/8"	1 1/2"	3/8"	7927N14	000000


USB-A, 3.2 Gen 2 (4)	Data, Power	10	5 7/8"	Black	Aluminum	2 3/8"	1 1/2"	3/8"	7927N13	00000

DIN-Rail-Mount USB Hubs

Secure and organize USB connections on DIN rail. These hubs are powered using the included DC terminal block or by connecting to a computer. They protect against data loss and damage from electrostatic discharge (ESD). USB ports are backward compatible, so they work with cords and connectors that meet the same or a lower USB standard.

Male USB-A


4 Female USB-A Connections	7 Female USB-A Connections	10 Female USB A Connections

USB 2.0—USB 2.0 hubs transmit data at speeds up to 480 Mbps.

USB 3.2 Gen 1—USB 3.2 Gen 1 hubs transmit data at speeds up to 5 Gbps.

CE Marked—CE marked hubs meet European safety, health, and environmental standards.

	No. of USB Connections		Transmission Speed
	Male	Female USB-A	USB 2.0, Mbit/s	USB 3.2 Gen 1, Gbit/s	Cord Lg., ft.	Shielding	Color	Lg.	Wd.	Ht.	Features	Mounting Location	Mounting Hardware Included	Certification		Each
USB 2.0



		1	4	480	—	6	Shielded	Black	15/16"	2 1/2"	5 7/16"	3-Wire DC (9-36V DC) Terminal Block	DIN Rail, Surface	Yes	CE Marked	1862N11	0000000


		1	7	480	—	6	Shielded	Black	15/16"	2 1/2"	5 7/16"	3-Wire DC (9-36V DC) Terminal Block	DIN Rail, Surface	Yes	CE Marked	1862N12	000000


		USB 3.2 Gen 1



				1	4	—	5	3	Shielded	Black	15/16"	2 1/2"	5 7/16"	3-Wire DC (9-48V DC) Terminal Block	DIN Rail, Surface	Yes	CE Marked	1862N13	000000


				1	7	—	5	3	Shielded	Black	15/16"	2 1/2"	5 7/16"	3-Wire DC (9-48V DC) Terminal Block	DIN Rail, Surface	Yes	CE Marked	1862N14	000000
				1	10	—	5	3	Shielded	Black	1 5/16"	3 1/4"	7 15/16"	3-Wire DC (9-40V DC) Terminal Block	DIN Rail, Surface	Yes	CE Marked	3848N23	000000

Male USB-C


2 Female USB-A and 2 Female USB-C Connections	4 Female USB-A and 3 Female USB-C Connections

USB 3.2 Gen 2—USB 3.2 Gen 2 hubs transmit data at speeds up to 10 Gbps.

	No. of USB Connections														Mounting Hole
	Male	Female USB-A	Female USB-C	Transmission Speed, Gbit/s	Cord Lg., ft.	Shielding	Color	Lg.	Wd.	Ht.	Features	Includes	Mounting Location	Mounting Hardware Included	Dia.	No. of		Each
USB 3.2 Gen 2



		1	2	2	10	2	Shielded	Black	1"	2 1/2"	4 1/4"	2-Wire DC (5V DC) Terminal Block	100-240V AC Adapter	DIN Rail, Surface	No	3/16"	4	3848N21	0000000


		1	4	3	10	2	Shielded	Black	13/16"	2 1/2"	7 7/16"	2-Wire DC (12-24V DC) Terminal Block	—	DIN Rail, Surface	No	3/16"	4	3848N22	000000

HDMI Splitters


HDMI Female x HDMI Female	HDMI Female x HDMI Male

Play audio and 4K video from a single source on multiple displays. These HDMI splitters are handy for classrooms, conference rooms, factory floors, and trade shows. To reach more displays, link multiple splitters together—this is known as a daisy chain.

	No. of HDMI Connections
	Input	Output	Ht.	Wd.	Dp.	Housing Material	Color	For Video Resolution	Current, amp	Voltage, V AC	Cord Lg., ft.	Power Cord Lg., ft.	No. of Blades	Includes	NEMA Type	Certification		Each
HDMI Female × HDMI Male



		1	2	21/32"	1 31/32"	2 9/32"	PVC	Black	3840 × 2160	0.2	100 to 240	1 1/2	5	2	AC Adapter, Four Plug Adapters, Power Cord	1-15	UL Listed, CE Marked	7011N101	000000


		HDMI Female × HDMI Female



				1	4	2 5/32"	6 7/16"	8 7/16"	Steel	Black	3840 × 2160	0.35	100 to 240	—	4	2	AC Adapter, Four Plug Adapters, Power Cord	5-15	UL Listed, CE Marked	7011N13	000000

Device-Prioritizing DIN-Rail-Mount Ethernet Switches

Device-prioritizing Ethernet switches, also known as managed Ethernet switches, let you control which devices get priority speed on your network. For example, you can set it so that safety systems get all the bandwidth they need while they're running, and all other devices on the network share what's left over. Easily set up these switches over the web or via command line interface. No software required. Mount them onto a standard 35 mm DIN rail alongside PLCs, relays, and power supplies—they snap in place and stay secure.

Ethernet switches connect computers, sensors, and other devices to the same network, so they can talk to each other, access the Internet, and provide you with real-time diagnostics. Switches are backward compatible, so they'll work in networks below their rated transmission speed. For example, a 100 Mbit/s switch will work in a 10 Mbit/s network, but it will only run at 10 Mbit/s.

Ethernet Switches

16 Sockets

Ethernet
No. of Sockets	Connection	Transmission Speed, Gbit/s	Ht.	Wd.	Dp.	Housing Material	Voltage, V DC	Wire Connection	No. of Terminals	Temp. Range, ° F	Certification		Each
16	RJ45	1	6 5/16"	2"	4 3/4"	Metal	12 to 60	Screw Terminal	6	-10 to 140	CE Marked	6631N24	0000000

Ethernet Switches with Port Mirroring


4 Sockets	6 Sockets	8 Sockets

Ethernet switches with port mirroring allow any port on the switch to duplicate the output of another port. This is useful for troubleshooting network and performance issues.

IEEE 802.1q—Ethernet switches that meet IEEE 802.1q standard for VLAN (Virtual Local Area Network) increase security, reliability, and efficiency by clustering devices on the network into groups. They also limit when and how devices can communicate outside of their group.

Ethernet
No. of Sockets	Connection	Communication Protocol	Transmission Speed, Gbit/s	Ht.	Wd.	Dp.	Housing Material	Voltage, V DC	Wire Connection	No. of Terminals	Temp. Range, ° F	Certification	Specs. Met		Each
4	RJ45	Profinet	1	5 1/2"	1 3/16"	3 3/8"	Plastic	9 to 30	Screw Terminal	4	-40 to 155	UL Listed, C-UL Listed	IEEE 802.1q	6631N11	0000000
6	RJ45	Profinet	1	5 1/2"	1 3/16"	3 3/8"	Plastic	9 to 30	Screw Terminal	4	-40 to 155	UL Listed, C-UL Listed	IEEE 802.1q	6631N12	00000000
8	RJ45	Profinet	1	4 1/8"	1 5/8"	3 3/8"	Plastic	9 to 30	Screw Terminal	4	-40 to 145	UL Listed, C-UL Listed	IEEE 802.1q	6631N13	00000000

Ethernet Switches with SFP Sockets


4 Ethernet Sockets with 2 SFP Sockets	5 Ethernet Sockets with 1 SFP Socket	8 Ethernet Sockets with 2 SFP Sockets

Ethernet switches with SFP sockets (small form-factor pluggable) accept transceivers that connect devices to Ethernet and fiber-optic lines.

Ethernet
No. of Sockets	Connection	No. of SFP Sockets	Transmission Speed, Gbit/s	Ht.	Wd.	Dp.	Housing Material	Voltage, V DC	Wire Connection	No. of Terminals	Temp. Range, ° F	Certification	Specs. Met		Each
4	RJ45	2	1	6 5/16"	2"	4 3/4"	Metal	20 to 57	Screw Terminal	6	-40 to 165	CE Marked	—	6631N21	0000000
5	RJ45	1	1	5 3/8"	1 3/16"	4 1/8"	Metal	20 to 57	Screw Terminal	6	-40 to 165	CE Marked	IEEE 802.1q	6631N22	000000
8	RJ45	2	1	4 5/8"	2"	3 15/16"	Metal	20 to 48	Screw Terminal	6	-40 to 165	CE Marked	—	6631N23	000000

Device-Prioritizing Rack-Mount Ethernet Switches

Control which devices get priority speed on your network. Also known as managed Ethernet switches, these switches reduce network congestion so security, automation, and other critical systems have the bandwidth they need. Use them to create smaller networks called VLANs (Virtual Local Area Networks) to improve performance and limit user access to specific parts of the network. If you need to connect devices that don’t use Ethernet, these switches have two SFP (small form-factor pluggable) ports that let you plug in a transceiver or module.

These switches mount into standard 19" wide racks, cabinets, and enclosures. To set them up, just enter their IP address into a web browser. They are backward compatible, so they'll work in networks below their rated transmission speed. That means a 100 Mbit/s switch will work in a 10 Mbit/s network, but it will only run at 10 Mbit/s.

Ethernet Switches


8 Ethernet Sockets with 2 SFP Sockets	16 Ethernet Sockets with 2 SFP Sockets

24 Ethernet Sockets with 2 SFP Sockets

Ethernet									Mounting
No. of Sockets	Connection	No. of SFP Sockets	Transmission Speed	Ht.	Wd.	Dp.	Housing Material	Voltage, V AC	Fasteners Included	Hole Lg. x Wd.	Electrical Connection	IEC Connector Type	Power Cord Lg., ft.	Specs. Met		Each
8	RJ45	2	10 Mbit/s, 100 Mbit/s, 1 Gbit/s	1 3/4"	11"	7 1/16"	Metal	100 to 240	No	0.35" × 0.24"	Straight Blade	C14	5	IEEE 802.1q	9507N15	0000000
16	RJ45	2	10 Mbit/s, 100 Mbit/s, 1 Gbit/s	1 3/4"	17 5/16"	8 1/16"	Metal	100 to 240	No	0.47" × 0.28"	Straight Blade	C14	5	IEEE 802.1q	9507N14	000000
24	RJ45	2	10 Mbit/s, 100 Mbit/s, 1 Gbit/s	1 3/4"	17 5/16"	8 1/16"	Metal	100 to 240	No	0.47" × 0.28"	Straight Blade	C14	5	IEEE 802.1q	9507N13	000000

Ethernet Switches with Power over Ethernet (PoE) Type 2


8 Ethernet Sockets with 2 SFP Sockets	24 Ethernet Sockets with 2 SFP Sockets

Switches with Power over Ethernet (PoE) can send both data and electricity to PoE-compatible devices, so you won’t have to run a separate power cord. If a device doesn’t support PoE, the switch only sends data to prevent damage. Their 30W output is often used to power advanced surveillance systems, wireless access points, and lighting.

Ethernet											Mounting
No. of Sockets	Connection	Power Over Ethernet Type	No. of SFP Sockets	Transmission Speed	Ht.	Wd.	Dp.	Housing Material	Output Power, W	Voltage, V AC	Fasteners Included	Hole Lg. x Wd.	Electrical Connection	IEC Connector Type	Power Cord Lg., ft.	Specs. Met		Each
8	RJ45	Active	2	10 Mbit/s, 100 Mbit/s, 1 Gbit/s	1 3/4"	11"	7 1/16"	Metal	30	100 to 240	No	0.35" × 0.24"	Straight Blade	C14	5	IEEE 802.1q	9507N12	0000000
24	RJ45	Active	2	10 Mbit/s, 100 Mbit/s, 1 Gbit/s	1 3/4"	17 5/16"	8 3/16"	Metal	30	100 to 240	No	0.47" × 0.28"	Straight Blade	C14	5	IEEE 802.1q	9507N11	000000

DIN-Rail-Mount Ethernet Switches

Mount these Ethernet switches onto a standard 35 mm DIN rail alongside PLCs, relays, and power supplies—they snap in place and stay secure. They connect computers, sensors, and other devices to the same network so they can talk to each other, access the Internet, and provide you with real-time diagnostics. Switches do not require set up—just plug in a device and it will be connected to your network. These switches are backward compatible, so they'll work in networks below their rated transmission speed. For example, a 100 Mbit/s switch will work in a 10 Mbit/s network, but it will only run at 10 Mbit/s.

Ethernet Switches


4 Ports	5 Ports	6 Ports	8 Ports	16 Ports

Ethernet
No. of Ports	Connection	Transmission Speed	Ht.	Wd.	Dp.	Housing Material	Voltage, V DC	Wire Connection	No. of Terminals	Temp. Range, ° F	Certification		Each



	4	RJ45	10 Mbit/s, 100 Mbit/s	5 1/2"	1 3/16"	3 3/8"	Plastic	10 to 32	Screw Terminal	4	-10 to 140	UL Listed, C-UL Listed, CE Marked	8653T31	0000000


	4	RJ45	10 Mbit/s, 100 Mbit/s, 1 Gbit/s	5 1/2"	1 3/16"	3 3/8"	Plastic	10 to 30	Screw Terminal	4	-40 to 165	UL Listed, C-UL Listed, CE Marked	8653T33	000000
	5	RJ45	10 Mbit/s, 100 Mbit/s, 1 Gbit/s	4 5/16"	15/16"	2 15/16"	Metal	12 to 48	Screw Terminal	3	-40 to 165	CE Marked	8653T44	000000
	5	RJ45	100 Mbit/s	4 1/2"	1"	3 1/8"	Plastic	10 to 32	Screw Terminal	3	-40 to 155	C-UL Listed	8653T12	000000
	5	RJ45	100 Mbit/s	4 1/2"	1"	3 1/8"	Plastic	10 to 32	Screw Terminal	3	35 to 140	C-UL Listed	8653T11	000000
	6	RJ45	10 Mbit/s, 100 Mbit/s	5 1/2"	1 3/16"	3 3/8"	Plastic	10 to 32	Screw Terminal	4	-10 to 140	UL Listed, C-UL Listed, CE Marked	8653T32	000000
	6	RJ45	10 Mbit/s, 100 Mbit/s, 1 Gbit/s	5 1/2"	1 3/16"	3 3/8"	Plastic	10 to 30	Screw Terminal	4	-40 to 165	UL Listed, C-UL Listed, CE Marked	8653T34	000000
	8	RJ45	10 Mbit/s, 100 Mbit/s, 1 Gbit/s	4 9/16"	2"	3 15/16"	Metal	9 to 57	Screw Terminal	6	-40 to 165	CE Marked	8653T45	000000
	8	RJ45	100 Mbit/s	4"	1 1/2"	3 1/8"	Plastic	10 to 32	Screw Terminal	3	35 to 140	C-UL Listed	8653T13	000000
	16	RJ45	10 Mbit/s, 100 Mbit/s, 1 Gbit/s	6 5/16"	2"	4 3/4"	Metal	12 to 48	Screw Terminal	2	-40 to 165	CE Marked	8653T43	000000
	16	RJ45	100 Mbit/s	6 1/2"	2 3/8"	4 1/2"	Metal	10 to 32	Screw Terminal	6	-40 to 155	C-UL Listed	8653T15	000000

Ethernet Switches With SC Fiber-Optic Ports

Image of Product. Front orientation. Contains Inset. Ethernet Switches. DIN-Rail-Mount Ethernet Switches, Ethernet Switches With SC Fiber-Optic Ports.

Switches with SC fiber-optic ports accept multimode fiber-optic cords.

For Multimode OM4 Cable—Multimode OM4 cords transmit further distances than standard Ethernet cables and with increased bandwidth. They are designed for high-speed data transmission applications, such as data centers. OM4 is backward compatible with older multimode fibers, allowing seamless upgrades in existing networks.

Ethernet		Fiber-Optic
No. of Ports	Connection	No. of Ports	For Cable Designation	Transmission Speed	Ht.	Wd.	Dp.	Housing Material	Voltage, V DC	Wire Connection	No. of Terminals	Temp. Range, ° F	Certification		Each



	4	RJ45	1	Multimode OM1 Multimode OM2 Multimode OM3 Multimode OM4	100 Mbit/s	4 1/2"	1"	3 1/8"	Plastic	10 to 32	Screw Terminal	3	-40 to 155	C-UL Listed	8653T18	0000000

Ethernet Switches with SFP Ports


5 Total Ethernet Ports with 2 SFP Ports	8 Total Ethernet Ports with 2 SFP Ports

Switches with SFP ports (small form-factor pluggable) accept transceivers that connect devices to Ethernet and fiber-optic lines. They feature Power over Ethernet (PoE), so they can transmit both data and power through a single port.

Ethernet		PoE
Total No. of Ports	Connection	No. of Ports	Std.	Type	No. of SFP Ports	Transmission Speed	Ht.	Wd.	Dp.	Housing Material	Output Power, W	Voltage, V DC	Wire Connection	No. of Terminals	Temp. Range, ° F	Certification		Each



	5	RJ45	4	PoE+ Type 2	Active	2	10 Mbit/s, 100 Mbit/s, 1 Gbit/s	6 5/16"	2"	4 3/4"	Metal	30	24 to 57	Screw Terminal	2	10 to 140	CE Marked	8653T47	0000000


	8	RJ45	8	PoE+ Type 2	Active	2	10 Mbit/s, 100 Mbit/s, 1 Gbit/s	6 5/16"	2"	4 3/4"	Metal	30	24 to 57	Screw Terminal	6	-40 to 165	CE Marked	8653T46	000000

Rack-Mount Ethernet Switches

Mount these Ethernet switches into standard 19" wide racks, cabinets, and enclosures. They connect computers, sensors, and other devices to the same network so they can talk to each other, access the Internet, and provide you with real-time diagnostics. These switches don’t require setup—just plug in a device and it will be connected to your network.

These switches are backward compatible, so they'll work in networks below their rated transmission speed. That means a 100 Mbit/s switch will work in a 10 Mbit/s network, but it will only run at 10 Mbit/s.

Ethernet Switches


16 Sockets	24 Sockets

Ethernet								Mounting
No. of Sockets	Connection	Transmission Speed	Ht.	Wd.	Dp.	Housing Material	Voltage, V AC	Fasteners Included	Hole Lg. x Wd.	Electrical Connection	IEC Connector Type	Power Cord Lg., ft.	Certification		Each



	16	RJ45	10 Mbit/s, 100 Mbit/s, 1 Gbit/s	1 11/16"	11"	5"	Metal	100 to 240	No	0.35" × 0.24"	Straight Blade	C14	5	CE Marked	9293N113	0000000


	24	RJ45	10 Mbit/s, 100 Mbit/s, 1 Gbit/s	1 11/16"	11"	7"	Metal	100 to 240	No	0.35" × 0.24"	Straight Blade	C14	5	CE Marked	9293N114	000000

Ethernet Switches with Power Over Ethernet (PoE) Type 2

16 Sockets

Switches with Power over Ethernet (PoE) can send both data and electricity through a single cord to PoE-compatible devices, so you won’t have to run a separate power cord. If a device doesn’t support PoE, the switch only sends data to prevent damage. Their 30W output is often used to power advanced surveillance systems, wireless access points, and lighting.

Ethernet										Mounting
No. of Sockets	Power Over Ethernet Type	Connection	Transmission Speed	Ht.	Wd.	Dp.	Housing Material	Output Power, W	Voltage, V AC	Fasteners Included	Hole Lg. x Wd.	Electrical Connection	IEC Connector Type	Power Cord Lg., ft.	Certification		Each



	16	Active	RJ45	10 Mbit/s, 100 Mbit/s, 1 Gbit/s	1 3/4"	17 3/8"	8 1/8"	Metal	30	100 to 240	No	0.47" × 0.26"	Straight Blade	C14	5	CE Marked	9293N112	0000000

Video Splitters


	1 Input	2 Outputs

Send video and audio from a single Standard DisplayPort output to multiple displays. These splitters are often used to show the same image on multiple screens or to stretch a computer desktop across two monitors.

	No. of
	Inputs	Outputs	Housing Material	Color	Current, amp	Voltage, V DC	Mounting Hardware Included	Includes	Cord Lg., ft.		Each
DisplayPort Female × DisplayPort Female



		1	2	Plastic	Black	2	5	Yes	AC Adapter, Power Cord	5	5531N12	0000000

ix Industrial DIN-Rail-Mount Ethernet Switches


5 Sockets	8 Sockets

Link industrial equipment with multiple computers to expand your data network. Use these switches with ix industrial connectors and cords. Mount them onto a standard 35 mm DIN rail alongside PLCs, relays, and power supplies—they snap in place and stay secure. Ethernet switches connect computers, sensors, and other devices to the same network, so they can talk to each other, access the Internet, and provide you with real-time diagnostics. These switches do not require setup—just plug in a device and it will be connected to your network. They are backward compatible, so they'll work in networks below their rated transmission speed. For example, a 100 Mbit/s switch will work in a 10 Mbit/s network, but it will only run at 10 Mbit/s.

Transmission Speed	Ht.	Wd.	Dp.	Housing Material	Voltage, V DC	Wire Connection	No. of Terminals	Electrical Connection	Temp. Range, ° F	Electrical Connection Coding	Ethernet Cable Category	Specs. Met		Each



5	1 Gbit/s	4 15/32"	2 1/16"	1"	Aluminum	24 to 48	Screw Terminal	3	Ix Industrial	-40 to 155	A	6A	IEC 61076-3-124	4726N11	0000000


8	1 Gbit/s	4 15/32"	2 1/16"	1"	Aluminum	24 to 48	Screw Terminal	3	Ix Industrial	-40 to 155	A	6A	IEC 61076-3-124	4726N12	000000

ix Industrial Ethernet Switches


5 Ports	8 Ports

Link industrial equipment with multiple computers to expand your data network. Use these switches with ix industrial connectors and cords. Ethernet switches connect computers, sensors, and other devices to the same network so they can talk to each other, access the Internet, and provide you with real-time diagnostics. These switches do not require setup—just plug in a device and it will be connected to your network. They are backward compatible, so they'll work in networks below their rated transmission speed. For example, a 100 Mbit/s switch will work in a 10 Mbit/s network, but it will only run at 10 Mbit/s.

							Mounting
No. of Ports	Transmission Speed	Ht.	Wd.	Dp.	Housing Material	Voltage, V DC	Fasteners Included	Hole Dia.	Wire Connection	No. of Terminals	Electrical Connection	Temp. Range, ° F	Electrical Connection Coding	Ethernet Cable Category	Specs. Met		Each



	5	1 Gbit/s	4 7/16"	3 5/32"	15/16"	Aluminum	24 to 48	No	0.157"	Screw Terminal	3	Ix Industrial	-40 to 155	A	6A	IEC 61076-3-124	4726N13	0000000


	8	1 Gbit/s	4 7/16"	3 5/32"	15/16"	Aluminum	24 to 48	No	0.157"	Screw Terminal	3	Ix Industrial	-40 to 155	A	6A	IEC 61076-3-124	4726N14	000000

Light Duty Ethernet Switches


5 Ports	8 Ports

16 Ports

Designed for low-traffic networks, these switches connect computers, sensors, and other devices so they can talk to each other, access the Internet, and provide you with real-time diagnostics. These switches do not require setup—just plug in a device and it will be connected to your network. They are backward compatible, so they'll work in networks below their rated transmission speed. For example, a 100 Mbit/s switch will work in a 10 Mbit/s network, but it will only run at 10 Mbit/s.

Ethernet								Electrical
No. of Ports	Connection	Transmission Speed	Ht.	Wd.	Dp.	Housing Material	Voltage	Connection	No. of Blades	Power Cord Lg., ft.	Temp. Range, ° F	Certification		Each



	5	RJ45	10 Mbit/s, 100 Mbit/s	15/16"	3 5/8"	2 11/16"	Metal	120V AC	Straight Blade	2	5	35 to 100	—	3787T2	000000


	5	RJ45	10 Mbit/s, 100 Mbit/s, 1 Gbit/s	1"	3 15/16"	2 1/2"	Metal	240V AC	Straight Blade	2	5	32 to 100	—	3787T1	00000
	5	RJ45	10 Mbit/s, 100 Mbit/s, 1 Gbit/s	1 1/4"	6 1/4"	4"	Metal	54V DC	Straight Blade	3	5	32 to 100	—	3787T11	00000
	8	RJ45	10 Mbit/s, 100 Mbit/s, 1 Gbit/s	1"	5 1/2"	3"	Metal	240V AC	Straight Blade	2	5	32 to 100	—	3787T9	00000
	16	RJ45	10 Mbit/s, 100 Mbit/s, 1 Gbit/s	1 23/32"	12 29/32"	6 23/32"	Metal	120V AC	Straight Blade	3	5	32 to 120	CSA Certified, CSA-US Certified	3787T7	000000

Low-Profile DIN-Rail-Mount Ethernet Switches


5 Sockets	8 Sockets	16 Sockets

These switches do the same job as full-sized DIN-rail mount Ethernet switches but take up less space, so they'll fit in shallow cabinets. No setup required—just plug in a device and it will connect to your network. Mount these Ethernet switches onto a standard 35 mm DIN rail alongside PLCs, relays, and power supplies. They snap in place and stay secure. They connect computers, sensors, and other devices to the same network, so they can talk to each other, access the Internet, and provide you with real-time diagnostics. These switches are backward compatible, so they'll work in networks below their rated transmission speed. For example, a 100 Mbit/s switch will work in a 10 Mbit/s network, but it will only run at 10 Mbit/s.

Ethernet											100 Mbit/s Transmission Speed		1 Gbit/s Transmission Speed
No. of Sockets	Connection	Ht.	Wd.	Dp.	Housing Material	Voltage, V DC	Wire Connection	No. of Terminals	Temp. Range, ° F	Certification		Each		Each
5	RJ45	4 1/8"	1 5/8"	1 1/2"	Metal	9 to 36	Screw Terminal	3	-40 to 155	UL Listed, C-UL Listed, CE Marked	6339N11	0000000	6339N21	0000000
8	RJ45	4 1/8"	2 5/16"	1 1/2"	Metal	9 to 36	Screw Terminal	3	-40 to 155	UL Listed, C-UL Listed, CE Marked	6339N12	000000	6339N22	000000
16	RJ45	4 1/8"	4 5/16"	1 1/2"	Metal	9 to 36	Screw Terminal	3	-40 to 155	UL Listed, C-UL Listed, CE Marked	6339N13	000000	———	0

Low-Profile Ethernet Switches


5 Sockets	8 Sockets	16 Sockets

These compact switches work just like regular Ethernet switches but are small enough to fit in shallow cabinets. They connect computers, sensors, and other devices to the same network, so they can talk to each other, access the Internet, and provide you with real-time diagnostics. These switches do not require setup—just plug in a device and it will connect to your network. They are backward compatible, so they'll work in networks below their rated transmission speed. For example, a 100 Mbit/s switch will work in a 10 Mbit/s network, but it will only run at 10 Mbit/s.

Ethernet							Mounting						100 Mbit/s Transmission Speed		1 Gbit/s Transmission Speed
No. of Sockets	Connection	Ht.	Wd.	Dp.	Housing Material	Voltage, V DC	Fasteners Included	Hole Dia., mm	Temp. Range, ° F	Wire Connection	No. of Terminals	Certification		Each		Each
5	RJ45	4 1/8"	2 11/16"	1 1/8"	Metal	9 to 36	No	4.5	-40 to 155	Screw Terminal	3	UL Listed, C-UL Listed, CE Marked	6078N11	0000000	6078N21	0000000
8	RJ45	4 1/8"	3 1/2"	1 1/8"	Metal	9 to 36	No	4.5	-40 to 155	Screw Terminal	3	UL Listed, C-UL Listed, CE Marked	6078N12	000000	6078N22	000000
16	RJ45	4 1/8"	5 3/8"	1 1/8"	Metal	9 to 36	No	4.5	-40 to 155	Screw Terminal	3	UL Listed, C-UL Listed, CE Marked	6078N13	000000	———	0

Power Over Ethernet Injectors

IEC C5

Socket

IEC

C13

Socket

With a single cord, send data and electricity to Power over Ethernet (PoE) compatible devices. These injectors are commonly used to run devices such as routers and wireless access points in areas where no power outlet is nearby. To run these injectors, you need a power cord and two Ethernet cords (all sold separately). Connect one Ethernet cord from your network hub to the input of the injector, and the other Ethernet cord from the injector to your device.

These injectors meet U.S., Canadian, and European standards for safety. All have a limited power source (LPS) rating, meaning they meet international safety standards for low-voltage output. They’re also rated for DOE Level VI efficiency, signaling they comply with Department of Energy efficiency requirements for power usage.

As these injectors convert AC voltage to DC voltage, some noise from the AC voltage will carry into the output. While this won't affect most applications, this noise can interfere with other signals in extremely sensitive applications. The lower the output noise, the less interference it creates.

When choosing an injector, consider how much power your device requires.

Passive Power Over Ethernet—Use passive injectors with passive devices. These injectors send power to connected devices at all times; if they are incompatible, the devices could be damaged.

Active Power Over Ethernet—Active injectors check for compatibility with connected devices before sending power, protecting those devices from possible damage. They’re backwards compatible, so injectors with higher output powers can still be used with lower-power devices that meet a different IEEE standard.

15.4 W Output—Injectors with a 15.4W output power are often used with internet-connected phones and simple surveillance cameras.

30 W Output—Injectors with a 30W output power commonly power advanced surveillance systems, wireless access points, and lighting.

60 W Output—Injectors with a 60W output power are a common choice for building automation components and video conferencing equipment.

90 W Output—Injectors with a 90W output power are often connected to TVs and monitors.

C6—For injectors with an IEC C6 input connection, choose power cords with an IEC C5 socket.

C14—For injectors with an IEC C14 input connection, choose power cords with an IEC C13 socket.

Shielded Ethernet—Injectors with shielded connections protect from electromagnetic interference (EMI).

CoC Tier 2—Injectors rated for CoC Tier 2 efficiency meet European standards for efficient power usage.

	Output				Input Connection		For Power Cord Connection							Mounting
	Power, W	Voltage, V DC	Current, amp	Max. Output Noise Peak-to-Peak, mV DC	IEC Style	Type	IEC	Type	Ethernet Shielding	Max. Transmission Distance, ft.	Ht.	Wd.	Dp.	Fasteners Included	No. of Holes	Hole Dia.	Certification	External Power Supply Efficiency Std.	Specs. Met		Each
Single Phase—100V AC to 240V AC Input Voltage







				Passive Power Over Ethernet

				15.4	56	0.275	200	C6	Plug In	C5	Plug In	Shielded	325	1.1"	4.2"	1.6"	No	—	—	UL Listed, C-UL Listed	DoE Level VI	IEEE 802.3af	6966N15	000000




						Active Power Over Ethernet

						15.4	56	0.275	200	C6	Plug In	C5	Plug In	Shielded	325	1.1"	4.2"	1.6"	No	—	—	UL Listed, C-UL Listed	DoE Level VI	IEEE 802.3af	6966N11	00000


						30	56	0.536	200	C14	Plug In	C13	Plug In	Shielded	325	1.2"	5"	1.8"	No	2	1/8"	UL Listed, C-UL Listed	DoE Level VI, CoC Tier 2	IEEE 802.3at	6966N12	00000
						60	56	0.535	250	C14	Plug In	C13	Plug In	Shielded	325	1.4"	6.4"	2.6"	No	2	1/8"	UL Listed, C-UL Listed	DoE Level VI, CoC Tier 2	IEEE 802.3bt	6966N13	00000
						90	56	1.6	250	C14	Plug In	C13	Plug In	Unshielded	325	1.7"	6.5"	3.15"	No	2	1/8"	UL Listed, C-UL Listed	DoE Level VI	IEEE 802.3bt	6966N14	00000

Micro M12 Ethernet Switches


D-Code Ethernet Connection	4-Pole M12 Plug

5-Pole M12 Plug	5-Pole M12 Socket

From factory floors to railway systems, the sturdy connections on these switches connect cabled devices in tough environments. More rugged than the RJ45 ports on standard Ethernet switches, the M12 connectors are IP rated to seal out water and dust, and won't shake loose from vibration. Use them to send data between sensors, switches, servers, computers, and PLCs, or to connect devices to the Internet. Plug in your devices and they’ll be connected to your network, no further setup required. When not in use, protect connectors with an M12 electrical connector cap.

All switches are backward compatible, so they work in networks that meet the same or lower transmission speed. For example, a 100 Mbit/s transmission speed switch will work in a 10 Mbit/s network, but it will only run at 10 Mbit/s.

IP66 Enclosure Rating and IP67 Enclosure Rating—IP66 and IP67 rated switches withstand washdowns and temporary submersion. You’ll often find them mounted directly to machines or equipment in process control and outdoor communication applications.

IP69K Enclosure Rating—IP69K rated switches have the highest level of protection. They withstand high-pressure washdowns and steam cleaning. These switches are designed for harsh environments with regular exposure to water, so you’ll find them in manufacturing, food processing, and wastewater treatment facilities. You can also use them in areas exposed to rain or snow.

A Code—Switches with A-coded plugs only receive power—they can’t share power with another switch connected down the line.

	Ethernet						Mounting			Power Connections
	No. of Sockets	Coding	Transmission Speed, Mbit/s	Housing Material	Seal Material	Voltage, V DC	Fasteners Included	Hole Dia., mm	Temp. Range, ° F	Plug Type	Socket Type	Enclosure Rating		Each
EtherNet/IP Communication Protocol, Modbus TCP/IP Communication Protocol







				Input, A Code

				6	D	10, 100	Plastic	Fluoroelastomer	8 to 32	No	5.3	-10 to 155	4-Pole M12	—	IP66, IP67	6207N11	0000000


				6	D	10, 100	Plastic	Fluoroelastomer	8 to 32	No	5.3	-10 to 155	4-Pole M12	—	IP66, IP67, IP69K	6207N15	000000




						Outlet, Inlet

						6	D	10, 100	Plastic	EPDM	8 to 32	No	5.3	-10 to 155	5-Pole M12	5-Pole M12	IP66, IP67	6207N12	000000


						6	D	10, 100	Plastic	EPDM	8 to 32	No	5.3	-10 to 155	5-Pole M12	5-Pole M12	IP66, IP67, IP69K	6207N16	000000


						Profinet Communication Protocol







										Input, A Code

										6	D	10, 100	Plastic	Fluoroelastomer	8 to 32	No	5.3	-10 to 155	4-Pole M12	—	IP66, IP67	6207N13	000000


										6	D	10, 100	Plastic	Fluoroelastomer	8 to 32	No	5.3	-10 to 155	4-Pole M12	—	IP66, IP67, IP69K	6207N17	000000




												Outlet, Inlet

												6	D	10, 100	Plastic	EPDM	8 to 32	No	5.3	-10 to 155	5-Pole M12	5-Pole M12	IP66, IP67	6207N14	000000


												6	D	10, 100	Plastic	EPDM	8 to 32	No	5.3	-10 to 155	5-Pole M12	5-Pole M12	IP66, IP67, IP69K	6207N18	000000

Device-Prioritizing Micro M12 Ethernet Switches


4-Pole M12 Plug	5-Pole M12 Plug

4-Pole M12 Socket	5-Pole M12 Socket

Device-prioritizing Ethernet switches, also known as managed Ethernet switches, let you control which devices get priority speed on your network. For example, you can set it so that safety systems get all of the bandwidth they need while they are running, and all other devices on the network share what's left over. Easily set up these switches over the web or via command line interface. No software required.

Ethernet switches connect computers, sensors, and other devices to the same network so they can talk to each other, access the Internet, and provide you with real-time diagnostics. These switches have port mirroring, which duplicates data from one network port to another—this lets you keep an eye on network traffic and troubleshoot performance issues. They are backward compatible, so they'll work in networks below their rated transmission speed. For example, a 100 Mbit/s switch will work in a 10 Mbit/s network, but it will only run at 10 Mbit/s.

M12 connections instead of typical RJ45 keep out contaminants and won’t come loose from vibration.

D—D-coded connectors are used for Ethernet rated up to Category 5 or 100 Mbps.

X—X-coded connectors are used for high-speed Ethernet with data transfer rates up to 1 Gb/s.

5-Pole M12—Switches with a 5-pole power plug have a ground pin.

IEEE 802.1q—These switches use the IEEE 802.1q standard for VLAN (Virtual Local Area Network). VLAN increases security, reliability, and efficiency by clustering devices on the network into groups and limiting when and how devices can communicate outside of their group.

	Ethernet									Mounting			Power Connections
	No. of Sockets	Coding	Connection	Transmission Speed	Ht.	Wd.	Dp.	Housing Material	Voltage, V DC	Fasteners Included	Hole Dia., mm	Temp. Range, ° F	Plug Type	Socket Type	Coding	Certification	Specs. Met	Enclosure Rating		Each
EtherNet/IP Communication Protocol



		10	D	M12	10 Mbit/s, 100 Mbit/s	8 7/8"	2 1/2"	1 7/16"	Metal	9 to 30	No	7.5	-10 to 130	4-Pole M12	4-Pole M12	L	UL Listed, C-UL Listed, CE Marked	IEEE 802.1q	IP67	6655N11	000000000


		10	D	M12	10 Mbit/s, 100 Mbit/s	8 7/8"	2 1/2"	1 7/16"	Metal	9 to 30	No	7.5	-10 to 130	5-Pole M12	5-Pole M12	L	UL Listed, C-UL Listed, CE Marked	IEEE 802.1q	IP67	6655N21	00000000
		10	X	M12	10 Mbit/s, 100 Mbit/s, 1 Gbit/s	8 7/8"	2 1/2"	1 7/16"	Metal	9 to 30	No	7.5	-10 to 110	4-Pole M12	4-Pole M12	L	UL Listed, C-UL Listed, CE Marked	IEEE 802.1q	IP67	6655N15	00000000
		10	X	M12	10 Mbit/s, 100 Mbit/s, 1 Gbit/s	8 7/8"	2 1/2"	1 7/16"	Metal	9 to 30	No	7.5	-10 to 110	5-Pole M12	5-Pole M12	L	UL Listed, C-UL Listed, CE Marked	IEEE 802.1q	IP67	6655N25	00000000
		8 2	D X	M12	10 Mbit/s, 100 Mbit/s 10 Mbit/s, 100 Mbit/s, 1 Gbit/s	8 7/8"	2 1/2"	1 7/16"	Metal	9 to 30	No	7.5	-10 to 130	4-Pole M12	4-Pole M12	L	UL Listed, C-UL Listed, CE Marked	IEEE 802.1q	IP67	6655N13	00000000
		8 2	D X	M12	10 Mbit/s, 100 Mbit/s 10 Mbit/s, 100 Mbit/s, 1 Gbit/s	8 7/8"	2 1/2"	1 7/16"	Metal	9 to 30	No	7.5	-10 to 130	5-Pole M12	5-Pole M12	L	UL Listed, C-UL Listed, CE Marked	IEEE 802.1q	IP67	6655N23	00000000


		Profinet Communication Protocol



				10	D	M12	10 Mbit/s, 100 Mbit/s	8 7/8"	2 1/2"	1 7/16"	Metal	9 to 30	No	7.5	-10 to 130	4-Pole M12	4-Pole M12	L	UL Listed, C-UL Listed, CE Marked	IEEE 802.1q	IP67	6655N12	00000000


				10	D	M12	10 Mbit/s, 100 Mbit/s	8 7/8"	2 1/2"	1 7/16"	Metal	9 to 30	No	7.5	-10 to 130	5-Pole M12	5-Pole M12	L	UL Listed, C-UL Listed, CE Marked	IEEE 802.1q	IP67	6655N22	00000000
				10	X	M12	10 Mbit/s, 100 Mbit/s, 1 Gbit/s	8 7/8"	2 1/2"	1 7/16"	Metal	9 to 30	No	7.5	-10 to 110	4-Pole M12	4-Pole M12	L	UL Listed, C-UL Listed, CE Marked	IEEE 802.1q	IP67	6655N16	00000000
				10	X	M12	10 Mbit/s, 100 Mbit/s, 1 Gbit/s	8 7/8"	2 1/2"	1 7/16"	Metal	9 to 30	No	7.5	-10 to 110	5-Pole M12	5-Pole M12	L	UL Listed, C-UL Listed, CE Marked	IEEE 802.1q	IP67	6655N26	00000000
				8 2	D X	M12	10 Mbit/s, 100 Mbit/s 10 Mbit/s, 100 Mbit/s, 1 Gbit/s	8 7/8"	2 1/2"	1 7/16"	Metal	9 to 30	No	7.5	-10 to 130	4-Pole M12	4-Pole M12	L	UL Listed, C-UL Listed, CE Marked	IEEE 802.1q	IP67	6655N14	00000000
				8 2	D X	M12	10 Mbit/s, 100 Mbit/s 10 Mbit/s, 100 Mbit/s, 1 Gbit/s	8 7/8"	2 1/2"	1 7/16"	Metal	9 to 30	No	7.5	-10 to 130	5-Pole M12	5-Pole M12	L	UL Listed, C-UL Listed, CE Marked	IEEE 802.1q	IP67	6655N24	00000000