Connect devices such as computers, printers, and mobile devices.

Power up mobile devices and other electronics.

With Kevlar-reinforced armor, these USB cords stand up to frequent use and bending better than standard USB cords.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission.

Pinch the sides on the plugs of these cords to insert them; they lock into a socket to prevent the cord from detaching.

Often used in robotics, packaging, conveyors, and other applications with constant movement and high temperatures, these silicone rubber cords bend and flex at temperatures up to 325° F.

Transmit data and video at high speeds between PCs, mobile devices, and displays.

Use these unshielded cords where signal interference is not a concern.

The M12 threaded connectors on these cords are more vibration resistant than RJ45 connectors.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission. They have an RJ45 plug on each end.

Often used in labs, storage facilities, and offices, the shielding blocks low to moderate signal interference from nearby equipment and devices. These cords have a flange on the socket end to mount them in a panel cutout.

Unlike the RJ45 ends on traditional Ethernet cords, the threaded M8 ends on these cords keep contaminants out and resist coming loose from vibration.

Connect computers, monitors, printers, and other devices with DB connections.

Display video from one source on two different monitors.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission.

Send high-definition signals to monitors, TVs, and projectors.

Connect audio to a single speaker, or extend the distance between stereo audio devices.

Securely connect equipment in data or signal applications. These cords have A- or B-coded plugs to meet the needs of your device.

Commonly used for movie, stage, and interior building lighting, these cords connect to equipment with five-pin XLR connections.

The threaded ends on these cords seal out contaminants and resist coming loose from vibration in tough industrial environments and automated systems while sending power and signal to devices with M12 connections.

TPE insulation protects these cords from some of the toughest industrial conditions, including abrasion, coolants, chemicals, UV rays, and weld slag. Use them in areas with welding, machining, and fluctuating temperatures to send signal and power to M12 proximity switches, valves, and other devices.

With a single cord, these splitters join two devices with M12 connectors to a distribution block or I/O module with M12 connectors. Often used with sensors and actuators, they send signals/power to your devices through one connection.

Send signal and power to low-current devices with M8 connections near welding, metal machining, and in spots where temperatures change.

With a higher maximum current than nano M8 and micro M12 cords, these mini cords are often used with automated systems, motors, and pumps.

These cords have an M8 connector on one end and an M12 connector on the other.

Connect batteries to each other or to electrical systems.

All cords have a country-specific plug on one end and an IEC socket on the other end.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.

Create a vibration-resistant connection—the socket on these cords locks onto any male receptacle and will not detach until manually unlocked.

After a power failure, these cords must be manually reset, preventing unexpected equipment startup.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.

Plug these cords into fans that have quick-disconnect terminals.

Use these cords with hydraulic and air-powered valves, motors, pumps, and pressure switches. They have a solenoid valve socket on one end and an M12 threaded plug on the other.

Send DC power to multiple electronics from one source. With industry standard barrel-style connections, these splitters are compatible with many power supplies and other devices.

Hardwire these cords to equipment.

Compatible with Molex connectors, these cords are sized to fit in tight spaces. They're often used in the interior of machines.

Like a tree trunk connecting to branches, these cords supply power to a chain of devices. Send power to high-amperage motors, robotic arms, and other machines in motor controls, conveyors, and sorting and packaging systems.

Power multiple devices with one extension cord.

Insulated to resist water, oil, and solvents, these cords withstand dirty and greasy environments.

In addition to an outlet on the end, these cords have multiple inline outlets.

The insulation resists water, oil, and chemicals, so these cords withstand dirty and greasy environments.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

Use these cords where ignitable gas and dust may be present. They're CSA certified for Class I, Divisions 1 and 2, Groups B, C, and D; and Class II, Divisions 1 and 2, Groups F and G hazardous environments.

These self-coiling cords return to their retracted length after stretching for tangle-free storage.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

These cords have an oil- and water-resistant insulation and impact-resistant connectors for protection in harsh environments.

Often used in automated applications such as robotics and cable carriers, this cable withstands continuous motion without degrading data or signal transmission.

Rated to 17,000 volts AC or higher, this cable is often used in oil drilling, robotics, and festoon systems. It withstands continuous motion without degrading data or signal transmission. The flat shape allows it to fit in tight spaces.

In addition to handling continuous movement, this cable withstands twisting up to 450° without degrading data or signal transmission. It's often used in welding robots and rotary tables.

Connect servocontrollers and servomotors in automated equipment and on assembly lines. This cable withstands continuous motion without degrading data or signal transmission.

After extending to full length to provide added reach, this cable retracts and self-coils for tangle-free storage. It's often used with hand tools and other portable devices.

This cable can be stretched by about 40% and return to its original length, making it useful for applications where cable is in motion. It's often sewn into garments or used with equipment that must be worn.

For high-heat applications such as furnaces and ovens, this cable's insulation withstands temperatures of 390° F and higher.

The insulation resists corrosive chemicals and salt water, and the wires in this cable are tin plated for corrosion resistance.

A thick rubber insulation resists cuts and abrasion, so this cable can be pulled over rough surfaces without damaging the wires inside.

Weather-resistant insulation makes this cable suitable for outdoor use and direct burial without conduit.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it in low-current circuits such as intercoms and security systems.

Connect low-current circuits such as intercoms and security systems to a building's electrical system in single-level facilities.

The metal armor on this cable acts as conduit to protect the internal wires. It's often used along the exterior of walls to carry power to outlet boxes. Also known as MC cable.

Also known as fixture whips, this cable has locknuts and fittings attached to the protective metal armor to secure it to a knockout. It's often used to connect light fixtures.

Hook up thermostats, air-conditioning units, and other low-voltage equipment.

This cable is used in variable-frequency drive motors. It has shielding to block signal interference caused by voltage fluctuations and current spikes.

This cable meets TC-ER crush and impact requirements for exposed runs in cable trays, so it can be used without conduit. It sends signal and data to operate, measure, or regulate automated equipment.

Nearly two-thirds the diameter of standard control cable, this cable fits in tight spaces. It sends signal and data to operate, measure, or regulate automated equipment.

Often used in automated applications that require continuous motion, this cable sends data between computers, servers, and switches without degrading signal transmission.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it to send data between computers, servers, and switches.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. It has an oil-resistant insulation to protect wires as the cable moves from duct to equipment or machinery.

Often used to send signal and data to order pickers and cranes, this cable withstands continuous motion applications without degrading data or signal transmission.

This cable has twisted pairs of wires that cancel signal interference from multiple transmission lines. Use it for complex and high-speed data and signal transmission.

Often used in radio transmission, network connections, and digital audio feed, this cable transmits audio, video, and data signals.

This cable withstands abrasion, oil, and the rough conditions found in welding applications.

Because they tightly thread to M12 connections, these connectors won’t let contaminants in or come loose from vibration in rugged industrial environments and automated systems as they send power and signal or just power to your equipment.

Safely use these connectors with 12 mm proximity switches, console lights, valves, and power supplies in food, beverage, and pharmaceutical applications—they’re FDA compliant for direct food contact.

Plug these connectors into hazardous location devices. Using a NAMUR signal, they operate at a low current and voltage, so they prevent the risk of sparks and ignition in volatile areas.

Quickly mate these connectors by pushing them together. They're often used with 12 mm proximity switches and valves in automated systems.

Send higher current than M5, M8, and M12 connectors near tough industrial jobs, such as welding and metal machining.

Send higher current than M12 connectors to automated systems, motors, and pumps in environments where washdowns are common.

A TPE cable protects these connectors from oil, weld slag, and other tough industrial stresses as they send signal and power to low-current devices with M8 connections.

Send signal and power to low-current devices with M8 connections in food processing and other sanitary applications.

Some of the smallest signal/power connectors we offer, these connectors fit in tight spaces and are often used in electronics.

Power hydraulic and air-powered valves, motors, pumps, and pressure switches.

Often used in devices that branch off of the main power line, these connectors power high-amperage fans, pumps, and machines in motor controls, conveyors, and sorting and packaging systems.

When mated, connectors meet NEMA 6P, NEMA 12, and either IP67 or IP69K.

Made with industry standard barrel-style ends, these connectors carry DC power between electronic devices and power supplies.

Assemble DB and HD connectors to replace worn out connectors.

Create D-sub connection points in panels, cases, and enclosure walls.

A threaded M8 end on these connectors keeps contaminants out and withstands vibration better than RJ45 ends on traditional Ethernet cords.

Pull wires all the way through the connector face, and then use the crimper to cut and crimp wires in one step.

Protect sensitive equipment from electromagnetic interference.