Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.

Even when used under water, these adhesives maintain their strength.

For invisible bond lines, these adhesives dry clear.

These machinable epoxies are mixed with steel, but won’t rust, so they can be used to repair cracks and threaded holes.

Permanently set threaded rods, studs, and rebar in concrete.

Bond new concrete to old concrete, or use this adhesive as a primer on concrete surfaces.

Make castings and fill voids with these two-part pourable epoxies.

Patch concrete floors and stairs with these compounds.

Use these two-part compounds to patch concrete floors and stairs in cold environments, such as freezers. At room temperature, they cure faster than any of our other concrete patching compounds.

Fill cracks in horizontal, vertical, and overhead concrete surfaces.

Not only do these leveling compounds withstand severe abrasion, wear, and impact, they also stand up to steel wheels and heavy blows without cracking.

Repair sidewalks and factory floors in areas with heavy pedestrian traffic. They can also be used to fill minor depressions and cracks.

Mix this two-part epoxy—a resin-aggregate blend and a pigmented hardener—to create a grout that resists chemicals and doesn't require sealing. Use on ceramic, concrete, and stone floor and wall tiles.

Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within.

Keep working when temperatures drop—these coatings can be applied in temperatures down to 20° F, when other coatings would fail. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.

Designed for use in areas with heavy vehicular traffic, these coatings are highly resistant to wear. They contain grit to provide traction to your surface.

These provide the highest traction and impact resistance of our antislip coatings. Longer-lasting than antislip tape, these coatings contain grit to provide traction.

Use these coatings in kitchens, furnace areas, and ships on plastic, metal, wood, and masonry.

Use these solvent-free, high-gloss coatings to protect concrete floors in enclosed areas. Durable enough for forklift traffic, they resist stains, moisture, and chemicals.

This paint leaves behind a stone-like texture. Use it to hide surface imperfections or to allow metal and wood fixtures to blend in with surrounding masonry and concrete.

Paint metal surfaces to stop rust from starting and prevent existing rust from spreading.

Mark traffic lanes, parking lots, and factory floors.

Increase paint’s ability to bond to hard, smooth surfaces, such as tile and metal.