Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.

Assortments include eight different epoxies in 0.1-oz. packets to handle a variety of small jobs.

For invisible bond lines, these adhesives dry clear.

With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these epoxies.

Bond most materials without the strong odor of other epoxy adhesives.

Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds.

Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.

For flexible bonds that resist cracking, these adhesives stay pliable.

Install building materials such as wood and drywall with these general purpose adhesives.

Bond and repair nosing and stair treads with this thick, two-part epoxy.

Adhere vinyl and rubber wall bases to wood, drywall, and concrete.

Pull off a small piece of putty and stick lightweight objects to a surface.

Permanently set threaded rods, studs, and rebar in concrete.

These kits include adhesives, applicators, and mixer nozzles.

These adhesives maintain their strength at temperatures up to 250° F.

Often used on diesel engines, exhaust systems, and gas turbines, these adhesives withstand high temperatures and provide excellent electrical insulation.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

Mix a small amount of water-based paint with this caulk to match the color of your surface.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.

Seal joints and gaps in concrete.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal.

For use in processing equipment that carries small particles less than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings.

Repair and rebuild metal surfaces that are exposed to heat. These surface fillers withstand temperatures over 450° F.

A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components.

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.

Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.

An easy way to make repairs in the field. Cut patches to size, peel off the backing, and press into place. Expose them to sunlight or a UV lamp and they begin to harden immediately.

Everything you need to repair cracked, worn, and damaged surfaces—even underwater.

Fill cracks in horizontal, vertical, and overhead concrete surfaces.

Pour these ready-to-use fillers in cracks up to ½" wide and ¼" deep on horizontal surfaces to make fast, light duty repairs.

Stop slow-flowing and weeping leaks in concrete. Also known as hydraulic cement, these crack fillers begin to harden in three to five minutes to create a permanent fix that won't shrink.

Not only do these leveling compounds withstand severe abrasion, wear, and impact, they also stand up to steel wheels and heavy blows without cracking.

These leveling compounds stand up to acid and chemical spills, making them a good choice for corrosive environments. They also withstand steel wheels and heavy impacts.

Use these two-part compounds to patch concrete floors, stairs, and walls in cold environments, such as freezers. At room temperature, they cure faster than any of our other concrete patching compounds.

For use when thickness will be more than 2", concrete mixes consist of cement, sand, and gravel.

These patching compounds are the most flexible and watertight we offer.

Make a temporary repair to cracks in any flat roof. These patching compounds are a powder that forms a thick gel in minutes when poured directly into standing water and rain.

Mix this two-part epoxy—a resin-aggregate blend and a pigmented hardener—to create a grout that resists chemicals and doesn't require sealing. Use on ceramic, concrete, and stone floor and wall tiles.

Press these putty-like fillers into cracks in wood up to 1/8" wide.

The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.

Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds.

Thinner than potting compounds, these rigid and wear-resistant coatings flow easily into small spaces between electrical components. Use them to secure and insulate hardware on printed circuit boards.

Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within.

Prevent the growth of harmful and odor-causing bacteria, mold, and fungus on HVAC system components and hardware. These coatings contain silver, which inhibits the growth of mildew, mold, and fungus.

Protect metal with these low-odor, water-based, UV-resistant coatings. They contain 316 stainless steel flakes, which provide durability and superior corrosion resistance.

These adhesive removers are safe, easy to use, and virtually odorless. They evaporate slowly, allowing them to work for up to 24 hours.

These adhesives come in a tube.

Repair rips, split seams, and detached soles to stop leaks in shoes, boots, and waders.