These boxes come ready to use with receptacles and/or light switches installed.

Knockouts allow you to modify these boxes to fit your application.

Close off unused switches.

Knockouts allow you to modify these boxes to fit your application.

Close off unused outlets.

Add depth to octagonal outlet boxes.

Close off unused outlets.

Protect the edges of carpet surrounding your outlet boxes.

Use the built-in connections to attach conduit without using fittings.

Designed for commercial use, these heavy duty boxes have thick, rigid walls.

Build your own outlet box or replace a damaged box.

Close off unused outlets.

Keep the cover closed during operation to completely shield the outlet and plug from rain, snow, and wet conditions.

These corrosion-resistant boxes are built to withstand exposure to rain, snow, and wet conditions.

Close off unused outlets.

Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components. Enclosures are made of nonconductive polycarbonate that resists denting, chipping, and cracking.

These enclosures have thicker walls than standard aluminum enclosures, but are still a lightweight yet durable alternative to stainless steel.

Stainless steel enclosures are more corrosion resistant than aluminum for use in environments with corrosive liquids.

Fiberglass enclosures resist denting better than metal and are more UV resistant than polycarbonate enclosures. They are nonconductive.

Mounting feet make attachment to machines and walls hassle-free.

Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components. These enclosures have a clear cover, so you can inspect components without opening the enclosure.

Mounting feet make attachment to machines and walls hassle-free. These enclosures are small and lightweight for use with sensors, switches, testing devices, and circuit boards.

View all sides of your installed components.

Protect electronics from washdowns in food plants and other sanitary environments. These enclosures mount directly into walls to protect wiring and reduce the surface area that needs to be cleaned. Standard-size push-button holes are already installed, saving you the effort of measuring and cutting holes yourself.

Made of fiberglass, these enclosures are lightweight and won’t rust, but still shield push-button controls from water, dirt, and oil.

Made of polycarbonate, these enclosures resist denting, chipping, and cracking better than stainless steel enclosures.

Made of nonconductive polycarbonate, these enclosures withstand prolonged submersion in water while protecting electronics from dents, chips, and cracks.

Attach these enclosures to machine panels and walls by their mounting feet—no need to open the cover and expose sensors, switches, and other electronics in wet locations. Made of aluminum, they’re lighter in weight than stainless steel yet resist rusting from water.

Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components.

Made of nonconductive polycarbonate, these enclosures withstand prolonged submersion in water while protecting electronics from dents, chips, and cracks. A clear cover lets you monitor the inside without opening them.

Check on the contents inside these enclosures from every angle without opening them in wet environments.

Holes in the cover allow easy installation of push buttons, switches, and indicating lights.

Small and lightweight, these enclosures are used with sensors, switches, and testing devices.

Keep electronics safe from harmful contact with hands and tools while still allowing air and moisture to enter.

Choose a body and two matching end caps to make your own dust-tight or watertight enclosure.

These enclosures have internal slots to hold circuit boards in place.

Made of aluminum, these enclosures resist corrosion from rain, sleet, and snow. While not as corrosion resistant as stainless steel, aluminum is lighter for better mobility, and also easier to machine for custom mounting.

Mounted horizontally, such as on machinery or rooftops, these enclosures protect wiring and other electrical components from rain, snow, and ice thanks to their overhanging top.

Suitable for installing in the ground or for use in wet environments, these direct burial enclosures are rated NEMA 6P for protection from dirt, washdowns, corrosion, and water submersion.

These enclosures are rated NEMA 13 for indoor protection from dirt and oil/coolant spraying.

Two separate chambers allow you to access wiring connections in the lower section without disturbing components that you install in the upper section.

Inspect components without opening the cover.

With standard-size, evenly spaced, aligned push-button holes, these washdown enclosures save you the time and effort of cutting those holes yourself.

Protect keypads, push-buttons, and other handheld controls with these round enclosures that are more comfortable to hold than square enclosures.

UL and C-UL classified, these enclosures safely house push-button controls and electronics where there’s explosive dust and gas.

Often used to house emergency-stop buttons, switches, and lights, these bright yellow enclosures are easy to spot, even in dimly lit areas. All have standard-size push-button holes to save time—no need to measure and cut your own holes.

For use in enclosures and panels where components require battery power, these enclosures have contacts for AA and 9-volt batteries.

These enclosures shield electrical components from water, so they’re safe to install onto DIN rail in wet and washdown environments.

A 9-volt battery fits inside a compartment in these enclosures to power testing devices and other hand-held instruments.

Create battery-powered, hand-held devices such as card and signal readers—these enclosures have a clear cover for checking screens and status lights inside.

Rated NEMA 12 for protection from dirt and oil/coolant dripping.

House and organize up to 800 lbs. of components such as servers, automation controls, and computers. All are compatible with standard 19" wide components.

Also known as conduit bodies, these ports provide access to wire and cable inside PVC conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run.

Also known as conduit bodies, these ports provide access to wire and cable inside thick-wall (rigid) metal conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run.

Attach conduit to a knockout in an outlet box or enclosure.

Attach conduit to a knockout in an outlet box or enclosure.

Attach conduit to a knockout in an outlet box or enclosure.

Attach conduit to a knockout in an outlet box or enclosure.

These fittings seal out liquids when connecting liquid-tight flexible metal conduit to a knockout in an outlet box or enclosure.

Attach conduit to a knockout in an outlet box or enclosure.

Attach conduit to a knockout in an outlet box or enclosure.

One end twists into a piece of conduit for a quick connection; the other end attaches to a knockout in an outlet box or enclosure.

Protect wire and cable from dust, dirt, and oil/coolant dripping—this raceway is rated NEMA 12.