Fall-Arrest Harnesses for Extracting
Stay straight up and down while being raised and lowered. D-rings on the shoulders of these harnesses keep you from pitching forward, so you're less likely to catch on obstacles than if you were wearing a typical fall-arrest harness. They also have a D-ring on the back for fall protection. To keep the harness feeling comfortable and lightweight when worn for long periods, there’s padding on the back and shoulders. As you bend, sit, and move, the leg straps keep pressure off your inner thighs and won’t ride up. The hardware is aluminum for good strength without weighing you down. When used with a lanyard and an anchor, these harnesses help you meet OSHA and ANSI safety standards.
Park an unused lanyard on one of the lanyard holders to prevent it from dragging or getting caught. The harnesses have an RFID tag, which is useful for taking inventory and tracking inspections. To make it easy to know when these harnesses should no longer be used, indicator stitching tears or pops during a fall.
Squeeze-release thigh buckles connect and disconnect more quickly than belt thigh buckles. They’re also more convenient because you don’t have to adjust the size each time you put them on.
Belt thigh buckles reduce the risk of loosening over time. They lock into a specific hole.
| Harness Size | For Height | For Weight, lbs. | Waist Size | Harness Material | D-Ring Location (No. of) | Capacity, lbs. | Specifications Met | Features | Each | |
Back and Shoulder Padding | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Front-Buckle Harness—Squeeze-Release Thigh Buckle | ||||||||||
| XS/S | 5'0"-5'8" | 100-150 | 24" to 32" | Polyester | Back (1), Shoulders (2) | 400 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140 | Lightweight Hardware, Horizontal Leg Straps, Impact-Indicating Stitching, Lanyard Holders, RFID Tag | 00000000 | 0000000 |
| M/L | 5'4"-6'5" | 150-225 | 32" to 48" | Polyester | Back (1), Shoulders (2) | 400 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140 | Lightweight Hardware, Horizontal Leg Straps, Impact-Indicating Stitching, Lanyard Holders, RFID Tag | 0000000 | 000000 |
| XL | 5'4"-6'6" | 225-300 | 36" to 52" | Polyester | Back (1), Shoulders (2) | 400 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140 | Lightweight Hardware, Horizontal Leg Straps, Impact-Indicating Stitching, Lanyard Holders, RFID Tag | 00000000 | 000000 |
| 2XL | 5'4"-6'6" | 300-400 | 45" to 57" | Polyester | Back (1), Shoulders (2) | 400 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140 | Lightweight Hardware, Horizontal Leg Straps, Impact-Indicating Stitching, Lanyard Holders, RFID Tag | 00000000 | 000000 |
Front-Buckle Harness—Belt Thigh Buckle | ||||||||||
| XS/S | 5'0"-5'8" | 100-150 | 24" to 32" | Polyester | Back (1), Shoulders (2) | 400 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140 | Lightweight Hardware, Horizontal Leg Straps, Impact-Indicating Stitching, Lanyard Holders, RFID Tag | 00000000 | 000000 |
| M/L | 5'4"-6'5" | 150-225 | 32" to 48" | Polyester | Back (1), Shoulders (2) | 400 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140 | Lightweight Hardware, Horizontal Leg Straps, Impact-Indicating Stitching, Lanyard Holders, RFID Tag | 00000000 | 000000 |
| XL | 5'4"-6'6" | 225-300 | 36" to 52" | Polyester | Back (1), Shoulders (2) | 400 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140 | Lightweight Hardware, Horizontal Leg Straps, Impact-Indicating Stitching, Lanyard Holders, RFID Tag | 00000000 | 000000 |
| 2XL | 5'4"-6'6" | 300-400 | 45" to 57" | Polyester | Back (1), Shoulders (2) | 400 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140 | Lightweight Hardware, Horizontal Leg Straps, Impact-Indicating Stitching, Lanyard Holders, RFID Tag | 00000000 | 000000 |
Heat-Resistant Fall-Arrest Harnesses
Made of inherently flame-resistant Kevlar, these harnesses withstand temperatures up to 800° F. They keep you safe when you’re working at height where heat and sparks could weaken your harness. The D-ring on the back keeps you upright if you fall. When used properly with a lanyard and an anchor, these harnesses help you meet OSHA and ANSI safety standards.
Indicator stitching at impact points pops or tears during a fall, so you’ll know at a glance if the harness has been weakened by stress. When you’re not using your lanyard, clip it into one of the holders so it doesn’t drag or get caught.
| Harness Size | For Height | For Weight, lbs. | Waist Size | Harness Material | D-Ring Location (No. of) | Max. Temperature, °F | Capacity, lbs. | Specifications Met | Features | Each | |
Front-Buckle Harness—Slide Thigh Buckle | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| S | 4'10"-6'0" | 100-160 | 32" to 40" | Kevlar | Back (1) | 800° | 420 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | Impact-Indicating Stitching, Lanyard Holders | 00000000 | 0000000 |
| M/L | 5'0"-6'2" | 140-280 | 36" to 48" | Kevlar | Back (1) | 800° | 420 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | Impact-Indicating Stitching, Lanyard Holders | 00000000 | 000000 |
| XL | 5'2"-6'6" | 200-330 | 44" to 52" | Kevlar | Back (1) | 800° | 420 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | Impact-Indicating Stitching, Lanyard Holders | 00000000 | 000000 |
Fall-Arrest Harnesses
Harnesses have a D-ring that attaches to a lanyard. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.
Padded harnesses have breathable padding on the back for all-day comfort.
Available Sizes | |||
|---|---|---|---|
| Size | For Height | For Weight | Waist Size |
Pullover Harness with Traditional Thigh Buckle—Polyester | |||
| M/L | 5'0"-6'4" | 140-280 lbs. | 32" to 48" |
| XL | 5'4"-6'6" | 200-330 lbs. | 36" to 54" |
| 2XL | 5'6"-6'8" | 230-380 lbs. | 42" to 57" |
| 3XL | 5'8"-6'8" | 250-400 lbs. | 46" to 60" |
Pullover Harness with Slide Thigh Buckle—Polyester | |||
| S | 4'10"-6'0" | 100-160 lbs. | 26" to 38" |
| M/L | 5'0"-6'4" | 140-280 lbs. | 32" to 48" |
| XL | 5'4"-6'6" | 200-330 lbs. | 36" to 54" |
| 2XL | 5'6"-6'8" | 230-380 lbs. | 42" to 57" |
| 3XL | 5'8"-6'8" | 250-400 lbs. | 46" to 60" |
Pullover Harness with Squeeze Release Thigh Buckle—Polyester | |||
| S | 4'10"-6'0" | 100-160 lbs. | 26" to 38" |
| M | 5'0"-6'2" | 140-240 lbs. | 30" to 42" |
| M/L | 5'0"-6'4" | 140-280 lbs. | 32" to 48" |
| L | 5'2"-6'4" | 170-300 lbs. | 34" to 50" |
| XL | 5'4"-6'6" | 200-330 lbs. | 36" to 54" |
| 2XL | 5'6"-6'8" | 230-380 lbs. | 42" to 57" |
Front-Buckle Harness with Traditional Thigh Buckle—Polyester | |||
| XXS/XS | 5’-6’2” | 0-150 lbs. | 24" to 32" |
| M/L | 5'4"-6'5" | 150-225 lbs. | 32" to 48" |
| XL | 5'4"-6'6" | 225-300 lbs. | 36" to 52" |
| 2XL | 5'4"-6'6" | 300-400 lbs. | 45" to 57" |
| XL/2XL | 5'2"-6'8" | 200-360 lbs. | 40" to 55" |
Front-Buckle Harness with Slide Thigh Buckle—Polyester | |||
| XXS/XS | 5’-6’2” | 0-150 lbs. | 24" to 32" |
| M/L | 5'4"-6'5" | 150-225 lbs. | 32" to 48" |
| XL | 5'4"-6'6" | 225-300 lbs. | 36" to 52" |
| 2XL | 5'4"-6'6" | 300-400 lbs. | 45" to 57" |
| XL/2XL | 5'2"-6'8" | 200-360 lbs. | 40" to 55" |
Front-Buckle Harness with Squeeze Release Thigh Buckle—Polyester | |||
| M/L | 5'0"-6'2" | 160-250 lbs. | 32" to 48" |
| XL/2XL | 5'2"-6'8" | 250-360 lbs. | 40" to 55" |
| 3XL | 5'6"-6'8" | 360-420 lbs. | 46" to 60" |
| Capacity, lbs. | Harness Material | D-Ring Location (No. of) | Specifications Met | Features | Choose a Size | Each | |
Pullover Harness with Traditional Thigh Buckle | |||||||
|---|---|---|---|---|---|---|---|
| 400 | Polyester | Back (1); Chest (1) | ANSI/ASSP Z359.11 | __ | 00000000 | 0000000 | |
Pullover Harness with Slide Thigh Buckle | |||||||
| 400 | Polyester | Back (1); Chest (1) | ANSI/ASSP Z359.11 | __ | 00000000 | 000000 | |
Pullover Harness with Squeeze Release Thigh Buckle | |||||||
| 400 | Polyester | Back (1); Chest (1) | ANSI/ASSP Z359.11 | __ | 00000000 | 000000 | |
Front-Buckle Harness with Traditional Thigh Buckle | |||||||
| 400 | Polyester | Back (1) | ANSI/ASSP Z359.11 | __ | 0000000 | 00000 | |
| 420 | Polyester | Back (1) | ANSI/ASSE A10.32, ANSI/ASSP Z359.11 | __ | XL/2XL | 00000000 | 00000 |
Front-Buckle Harness with Slide Thigh Buckle | |||||||
| 400 | Polyester | Back (1) | ANSI/ASSP Z359.11 | __ | 0000000 | 00000 | |
| 420 | Polyester | Back (1) | ANSI/ASSE A10.32, ANSI/ASSP Z359.11 | __ | XL/2XL | 00000000 | 00000 |
Front-Buckle Harness with Squeeze Release Thigh Buckle | |||||||
| 420 | Polyester | Back (1) | ANSI/ASSP Z359.11 | Padded Back | 0000000 | 000000 | |
Harsh-Environment Fall-Arrest Harnesses
With thick webbing and a water-repellent treatment, these harnesses resist elements that could shorten the lifespan of a harness, such as heat, moisture, sweat, grease, and chemicals. Attach a lanyard to the D-ring on the back, and these harnesses will keep you upright if you fall. Unfold the leg support straps after a fall to ease pressure on your legs while you wait for help. When used together with a lanyard and an anchor, these harnesses help you meet OSHA and ANSI safety standards.
Padding on the back and shoulders makes these harnesses feel lightweight and comfortable, even when worn for long periods. The leg straps are designed to stay horizontal, so they won’t ride up as you move. The hardware is aluminum for good strength without weighing you down. It also resists corrosion. Park an unused lanyard on one of the lanyard holders so that it won’t drag or get caught. Indicator stitching is designed to tear during a fall or impact, so it’s easy to tell if a harness is still safe to use.
| Harness Size | For Height | For Weight, lbs. | Waist Size | Harness Material | D-Ring Location (No. of) | Capacity, lbs. | Specifications Met | Features | Each | |
Back and Shoulder Padding | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Front-Buckle Harness—Squeeze-Release Thigh Buckle | ||||||||||
| XS | 4'10"-5'8" | 100-150 | 30" to 39" | Polyester | Back (1) | 420 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | Lightweight Hardware, Horizontal Leg Straps, Leg Support Straps, Impact-Indicating Stitching, Lanyard Holders | 00000000 | 0000000 |
| S/M | 4'10"-6'5" | 100-310 | 34" to 47" | Polyester | Back (1) | 420 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | Lightweight Hardware, Horizontal Leg Straps, Leg Support Straps, Impact-Indicating Stitching, Lanyard Holders | 00000000 | 000000 |
| L/XL | 5'8"-6'5" | 240-310 | 42" to 55" | Polyester | Back (1) | 420 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | Lightweight Hardware, Horizontal Leg Straps, Leg Support Straps, Impact-Indicating Stitching, Lanyard Holders | 00000000 | 000000 |
| 2XL/3XL | 6'2"-6'5" | 270-310 | 50" to 66" | Polyester | Back (1) | 420 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | Lightweight Hardware, Horizontal Leg Straps, Leg Support Straps, Impact-Indicating Stitching, Lanyard Holders | 00000000 | 000000 |
Electrical Arc Flash-Resistant Fall-Arrest Harnesses
These harnesses have leather-insulated metal components and meet ASTM F887 when used with an arc flash-resistant lanyard. They have a D-ring on the back that attaches to a lanyard. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.
| Capacity, lbs. | Harness Material | D-Ring Location (No. of) | Size | Waist Size | Specifications Met | Each | |
Front-Buckle Harness with Slide Thigh Buckle | |||||||
|---|---|---|---|---|---|---|---|
| 400 | Kevlar | Back (1) | XL | 32" to 56" | ANSI Z359.1, ASTM F887 | 000000 | 0000000 |
Fall-Arrest Harnesses for Positioning
D-rings on each hip provide a stable working position. Harnesses have a D-ring on the back that attaches to a lanyard for fall protection. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.
| Capacity, lbs. | Harness Material | D-Ring Location (No. of) | Harness Size (Waist) | For Height | For Weight, lbs. | Specifications Met | Each | |
Front-Buckle Harness with Slide Thigh Buckle | ||||||||
|---|---|---|---|---|---|---|---|---|
| 425 | Polyester | Back (1), Hips (2) | XL (36" to 52") | 5’2”-6’6” | 210-320 | ANSI/ASSP Z359.11 | 0000000 | 000000 |
Zip-Up Harness with Slide Thigh Buckle | ||||||||
| 310 | Polyester | Back (1), Hips (2) | M (34" to 37") | 5’-6’3” | 140-250 | ANSI Z359.1 | 0000000 | 000000 |
| 310 | Polyester | Back (1), Hips (2) | L (38" to 41") | 5’-6’3” | 140-250 | ANSI Z359.1 | 0000000 | 000000 |
| 310 | Polyester | Back (1), Hips (2) | XL (42" to 49") | 5’2”-6’6” | 180-310 | ANSI Z359.1 | 0000000 | 000000 |
Fall-Arrest Harness Padding
Stay comfortable when wearing your harness for long periods of time. This padding keeps your harness from digging in and causing chafing. It’s flexible yet durable. Straps with snaps or hook and loop secure it to your harness.
Padding with arc-flash protection is tested to meet ASTM F887 standards for jobs where there is a risk of exposure to electric arcs and flames. It's made of Nomex, so it won't melt or drip if exposed to flash fires.
Leg Support Straps
Ease pressure on your legs and keep blood flowing—these straps help prevent injury while you’re waiting for rescue after a fall. They come tucked in a pouch that you loop onto your harness. If you fall, pull them out and hook them under your feet.
Nomex straps are tested to meet ASTM F887 standards for jobs where there is a risk of exposure to electric arcs and flames. They won't ignite, melt or drip if exposed to flash fires.
High-Visibility Vests for Fall-Arrest Harnesses
Stand out while you’re working up high. Rated ANSI/ISEA 107 Class 2, these vests have bright colors and reflective stripes to keep you visible from a distance. Wear them over your fall-arrest harness so people on the ground can check that you’re working safely. Since they have slits on the back and sides for access to your D-rings, the colors and stripes won’t be obscured by your harness straps. Made from polyester mesh, they’re durable and lightweight—they stay bright through many wears and won’t block the breeze. They also protect your harness from abrasion.
To keep tools close, clip them to a tethering point on the front or back of these vests. All tethering points meet ANSI/ISEA 121 for preventing objects from falling and causing injury or damage.
Available Sizes | |
|---|---|
| Size | Chest Size |
| S/M | 52" |
| L/XL | 57" |
| 2XL/3XL | 62" |
Fall-Arrest Harnesses for Ladder Climbing and Positioning
These versatile harnesses have one D-ring on the chest for use with ladder-climbing systems as well as one D-ring on each hip to provide a stable working position. Attach harness to a ladder-climbing system using a carabiner. Harnesses have a D-ring on the back that attaches to a lanyard for fall protection. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.
| Capacity, lbs. | Harness Material | D-Ring Location (No. of) | Size | For Height | For Weight, lbs. | Waist Size | Specifications Met | Each | |
Pullover Harness with Traditional Thigh Buckle | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 400 | Polyester | Back (1), Chest (1), Hips (2) | One Size Fits All | __ | __ | 32" to 48" | ANSI Z359.1 | 0000000 | 0000000 |
Front-Buckle Harness with Traditional Thigh Buckle | |||||||||
| 400 | Polyester | Back (1), Chest (1), Hips (2) | M/L | 5'4"-6'5" | 150-225 | 32" to 48" | ANSI Z359.1 | 00000000 | 000000 |
Basket Stretchers
The mesh basket provides added comfort and security for transporting injury victims extended distances.
| Lg. | Wd. | Ht. | Cap., lbs. | Material | Features | Cannot Be Sold To | Each | |
| 80 1/2" | 22 1/2" | 8" | 1,500 | Steel | Adjustable Footrest, Restraining Straps (4) | Canada | 0000000 | 0000000 |
Electrical-Insulating Hook Retrievers
Also known as rescue hooks, these retrievers are often used to pull an injured worker away from electrical hazards without risking the safety of other workers. They have a fiberglass handle and insulated hook to protect against accidental contact with live electrical circuits. The handle is tested to meet the requirements of ASTM F711.
Rescue Helmets
Often used in search and rescue operations, these helmets have rail mounts for night vision goggles, headsets, and other equipment. With devices secure and hands free, you can focus on your mission. Their polystyrene liner protects the neck and head by absorbing force during impact. To hold the helmet secure on your head, a ratchet in the back adjusts the fit. Chin straps keep the helmet in place when working upside down and in heavy wind. These helmets meet U.S. safety standards for military operations and European safety standards for whitewater sports and mountaineering, protecting your head in a variety of extreme environments.
To keep you cool under pressure, the helmets have ventilation holes and moisture-wicking padding. Snap the included vent covers on when you need to keep dust and debris out. They also have a sweatband to prevent perspiration from getting in your eyes.
Use a headlamp adapter (sold separately) to attach a light to the night vision goggle mount without needing to use tools. The adapter holds the lamp firmly to the helmet so it doesn't slide off during use.
Use headset adapters or headset and boom microphone adapters (both sold separately) to clip communication systems onto the helmet. Once the adapters are installed, you can take the communication systems on and off without tools. Headset adapters are compatible with helmet-mounted headsets. Headset and boom microphone adapters let you convert headsets with a headband or neckband to helmet mount. Once attached, the headset earpieces can be flipped up when you’re not using them so it’s easier to take the helmet off quickly. They also include a boom microphone adapter.
Add a visor (sold separately) to the helmet for eye protection. No need for tools—just snap it on. Once attached, you can lift the visor away from the face and lock it in the up position. A coating on the inside and outside resists scratching. These visors are rated EN 166:2002 Class 2B for clarity and impact resistance to protect from debris, water, and wind.
| Material | Hat Size | Weight, oz. | Features | Specifications Met | Choose a Color | Each | |
Ratchet Adjustment | |||||||
|---|---|---|---|---|---|---|---|
Polycarbonate Plastic | 6 5/8-7 7/8 | 25.5 | Ventilation Holes, Vent Covers, Night Vision Goggles Mount, Precision Adjustment, Comfort Liner, Neck Pad, Foam Shell | ACH Blunt Impact AR/PD 10-02, EN 12492, EN 1385, EN 14052, MIL-DTL-13924, MIL-DTL-32067, MIL-STD-810 | 0000000 | 0000000 | |
