Protect LEDs, solar cells, and fiber optics with a coating that’s clear enough to see through. These coatings let optimal light pass through and repel dust and moisture, so they won’t distort your view of what’s underneath. Made of silicone rubber, they won’t cloud in hot, humid environments. That means they’re great for use outdoors, such as on signs and instrumentation panels. These coatings are thinner than potting compounds, flowing into the smallest contours on your device to cover it completely. Silicone rubber conformal coatings are the most flexible kind of conformal coating, so they won’t crack or peel from vibration. To protect sensitive equipment, these coatings also prevent static discharge.

Simply spray these coatings on your device without needing a potting box or other container. Since they cure at room temperature, you won’t need UV lights or cure ovens either. You can remove them if necessary.

These coatings are IPC certified for use with circuit boards. They also meet UL 94 V-0 for flame retardance.

High humidity, harsh chemicals, water submersions, and salt are no match for these electronic coatings. They also resist UV light, so they’ll work outdoors. Use them on circuit boards, sensors, and LED drivers in heavy machinery. They’re thinner than potting compounds, so they flow into the smallest contours of your components to cover them completely.

Tested to meet ASTM E595, a standard used by NASA, these compounds produce almost no volatile emissions that could damage sensitive electronics, even in a vacuum. Light passes through them easily, so they’re ideal for protecting solar cells and fiber optics. Made of silicone rubber, these compounds are softer and more flexible than epoxy and urethane compounds. That means they’re better at protecting against shocks and vibration. They also withstand a wider range of temperatures, so you can use them with electronics that heat and cool rapidly. These compounds are excellent electrical insulators, and they’ll shield your components from moisture and dust. However, they don’t hold up well to chemicals or scrapes. They’re also known as RTV (room-temperature vulcanizing).

These compounds are easy to apply in high volumes. Just mix the two parts together and pour them over components inside a container, such as a potting box.

Hide proprietary information on electrical components while also protecting them from moisture, dust, and static. All it takes is a single thin layer of these black coatings. They’re often used to protect custom parts while prototyping. Place them under a UV curing lamp to fully harden them in just 5 seconds. Made of urethane rubber, they resist chemicals and scratches and won’t crack in low temperatures. That means they’re great for harsh environments. These coatings meet UL 94 V-0 for flame retardance.

These coatings are thinner than potting compounds, so they flow into the smallest contours to cover your parts completely. They also don’t require a potting box or other container. Dispense these coatings with a gun (sold separately).

Protect circuit boards and other electronics from fire and heat. These self-extinguishing compounds meet UL 94V-0 for flame retardance and withstand temperatures up to nearly 400° F. Use them to shield components from dust, moisture, chemicals, mechanical shock, and vibration. Since they’re epoxies, they won’t break down from chemicals or moisture. They’re also excellent electrical insulators. These compounds have the consistency of honey once they’re mixed, so they seep into crevices to encase intricate components.

Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics. Use them to encase electronic assemblies for protection from dust, moisture, mechanical shock, and vibration. Softer and more flexible than epoxies and urethanes with the widest temperature range, these silicone rubber compounds are the best choice for high-temperature applications and electronics exposed to thermal cycling. They have excellent electrical insulation and good moisture resistance but poor chemical and abrasion resistance. Also known as RTV (room-temperature vulcanizing).

These compounds dry quickly when exposed to UV light allowing you to handle the potted items sooner. Made of silicone rubber, they’re softer and more flexible than epoxy or urethane compounds, so they’re better at protecting against shocks and vibration. They also withstand a wider range of temperatures, so they’re often used with electronics that heat and cool rapidly. These compounds are excellent electrical insulators, and they’ll shield your components from moisture and dust. However, they don’t hold up well to abrasion or chemicals. The tapered nozzle lets you apply them precisely.

Thinner than standard potting compounds, these coatings flow easily into small spaces between electrical components. Use them to secure and insulate hardware on printed circuit boards. Rigid and wear resistant, epoxies have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. Dispense with a mixer nozzle and a gun (each sold separately).

These coatings are formulated for use in sensitive applications such as manufacturing semiconductors. Thinner than potting compounds, they flow easily into small spaces between electrical components. The coatings begin to harden when exposed to UV light. Use them to secure and insulate hardware on printed circuit boards. A gun (sold separately) is required to dispense them.

No mixing required—these potting compounds come ready to apply. Use them to encase electronic assemblies for protection from dust, moisture, mechanical shock, and vibration. Softer and more flexible than epoxies and urethanes with the widest temperature range, silicone rubber potting compounds are the best choice for high-temperature applications and electronics exposed to thermal cycling. They have good moisture resistance but poor chemical and abrasion resistance. Silicones provide excellent electrical insulation. They're also known as RTV (room-temperature vulcanizing) compounds because they don’t need heat or UV light to cure.

These thermally conductive coatings keep electrical components cool by dissipating heat. Use them to bond transformers, transistors, and other heat-generating components to printed circuit boards and heat sinks. They require a gun (sold separately) to dispense.

Thinner than potting compounds, these coatings flow easily into small spaces between electrical components. They require an ultraviolet curing lamp to reach full strength. Use them to secure and insulate hardware on printed circuit boards.

Make repairs or changes to electrical components after they’ve been potted. While most compounds are permanent, these form a gel that bonds to itself, so you can peel it off without damaging your equipment. Often used in junction boxes, they form a water- and dust-proof seal that’s rated IP68 while also providing excellent electrical insulation. Made of silicone rubber, they withstand a wide range of temperatures and are soft and flexible enough to resist shock and vibration. However, they’re not as strong as permanent potting compounds, so they don’t resist scrapes as well as those made of epoxy and urethane. They’re also not as chemical resistant as epoxy and urethane compounds.

These compounds won’t solidify once you open the container, so you have time to make adjustments when applying them. When removing them from your components, they mostly come off in one piece but there might be some residue left over.

These coatings are formulated for use in sensitive applications such as manufacturing semiconductors. Thinner than potting compounds, the coatings flow easily into small spaces between electrical components. Use them to secure and insulate hardware on printed circuit boards. They are rigid and wear resistant, have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. They require a gun and a mixer nozzle (each sold separately) to dispense.

Combine the flexibility of silicone with the durability of standard epoxy—these compounds are great for protecting sensitive electronics that need to flex or expand and contract. Because they’re an epoxy, they still have excellent moisture, chemical, and abrasion resistance. They withstand a wide range of temperatures, and this formulation won’t crack or split as components heat up and cool down. These compounds are excellent electrical insulators, and they’ll shield your components from moisture and dust. You can also use them as an adhesive since they’re also tacky.

They come in a cartridge, so you can apply them precisely. To dispense, they require a mixer nozzle and gun (both sold separately).

Handle potted items within minutes—these potting compounds dry quickly when exposed to UV light. For added strength and durability, cure them with heat. Since they’re epoxy, they won’t break down from chemicals or moisture. They’re also excellent electrical insulators and withstand a wide range of temperatures. Use them to shield components from dust, moisture, chemicals, mechanical shock, and vibration. You need a mixer nozzle (not included) and a gun and plunger (both sold separately) to dispense. The nozzle lets you apply these compounds precisely.

For maximum effectiveness, these compounds need to be heat cured after they’re cured with UV light. Overall dry time includes heat curing at 149° F.

Protect circuit boards and other electronics where high heat is a concern but you don’t need to transfer that heat elsewhere. These compounds are a good middle ground between standard epoxy compounds and heat-transfer compounds. They work at temperatures twice as high as standard epoxy compounds. However, they don't conduct heat as well as heat-transfer compounds so they're not the best choice for circuit boards that run for long periods of time. Harden these compounds at room temperature—they don’t require an oven to harden like heat-transfer compounds do.

Since they’re an epoxy compound, they won’t break down from chemicals or moisture. They’re also excellent electrical insulators and withstand a wide range of temperatures. Use them to shield components from dust, moisture, chemicals, mechanical shock, and vibration.