Protect RJ45 connectors on Ethernet cables from strain when cables are pulled and bumped.

Audio/video HDMI connectors and cords are rated IP67 when mated.

Protect your mated connections from moisture and light splashing.

Caps are watertight to protect hazardous location safe-break plugs when not in use.

Caps are watertight to protect safe-break plugs when not in use.

Protect high-current connectors when not in use.

Protect screw-together M12 connectors when not in use.

Tap and splice multiple wires together at the same time.

When heat is applied, adhesive-lined insulation shrinks and bonds to the wires, creating a moisture- and corrosion-resistant seal.

These splices can withstand higher temperatures than insulated splices.

Visually confirm your connection through the inspection window in the insulation of these splices.

These splices are filled with a sealant that creates a barrier to completely keep out moisture when splices are crimped.

Visually confirm your connection through the inspection window.

The most secure, electrically conductive, and environmentally sealed connection we offer, these splices have enclosed solder and an adhesive-lined insulation that melt when heat is applied.

When heat is applied, adhesive-lined insulation shrinks and bonds to the wires, creating a watertight seal.

These splices can withstand higher temperatures than insulated splices.

Join wires and cables in some of the dirtiest and wettest locations—from paper mills to marine environments—without special tools.

Tighten the screws to connect wires.

A plastic cover fully insulates these splices and is clear so you can visually confirm the connection.

Create a secure connection that resists corrosion and water.

For use with a compression tool, these splices are color-coded to match compression dies.

Since a cover fully insulates these splices, no metal is exposed when connected.

Suitable for use underground, these connectors consist of a twist-on wire connector and an abrasion- and moisture-resistant insulator tube.

Rated to 300° F, these connectors are an excellent choice for use in high-temperature applications such as HID lighting and electric heat.

Large enough to be used with a wide range of wire sizes, these connectors can still fit into cramped outlet boxes.

Soft molding over the wings provides a comfortable grip.

Made of porcelain, these connectors can withstand temperatures up to 1200°F.

Insert wires and twist on the threaded end caps. The caps lock wires into place, making these splices a good choice for high-vibration applications.

With a ring of solder on the inside, these heat-shrink splices create secure, water-resistant connections between wires without the need for a crimping tool.

Pierce the insulation of wire without stripping it to make quick connections that are also sealed to keep out water.

Filled with gel, these wire taps seal out moisture.

Connect a tap wire to a main wire without stripping—these wire taps penetrate insulation.

Tighten screws to connect a tap wire to a main wire.

Designed for use in high-temperature applications such as motors, ovens, and furnaces, these assortments include a variety of terminals and splices made of heat-resistant materials.

Maintain a supply of extra terminals and splices in various sizes.

Convenient for jobs when you don't have a crimping tool on hand, these butt splices have end caps that you twist instead of traditional crimping. The end caps lock the wire in place, making them good for high-vibration applications.

A good choice for jobs where you don’t have crimping tools on hand, these connectors twist on to install wire quickly.

When the splices in these assortments are heated, the enclosed solder melts to create the most secure, electrically conductive, and environmentally sealed connection we offer.

Cover unused electrical outlets or plug prongs to protect them from dust, dirt, liquids, and other contaminants.

A different shrink ratio on each end allows this tubing to fit over cable assemblies and wire harnesses with large connections, or around connectors with a 90° elbow.

Maintain a supply of tubing in a variety of sizes that withstand abrasion, moisture, and chemicals.

Extra-thick walls provide better protection against abrasion and tears than standard moisture-seal tubing, as well as creating a water-resistant seal.

Create a water-resistant seal—this tubing has an adhesive lining that melts when the tubing is heated and bonds to the underlying surface.

Extra-thick walls provide more protection against abrasion and tears than standard high-shrink-ratio tubing. This tubing shrinks down to 1/6th of its original ID, so it creates a tight seal over irregularly shaped objects.

The smallest heat-shrink tubing we offer, this tubing protects wire with a 0.017" and smaller diameter.

Access connections more easily than with standard heat-shrink tubing. Make a small slit in this tubing to peel it away.

Made of woven polyolefin/polyester fabric, this tubing has excellent abrasion resistance so it can be dragged over rough surfaces without damage.

After being cleaned with alcohol, this tubing is bagged and sealed in a clean room. It's certified for material quality and purity.

Approved for contact with food, this tubing is FDA Compliant 21 CFR 177.1330.

Use this tubing where wire and cable may be exposed to chemicals, oil, and acids.

Resistant to diesel fuel, hydraulic fluid, and lubricating oil, this tubing is often used in vehicles.

With thin walls, this tubing shrinks faster than other high-temperature tubing. It withstands up to 500° F.

Also known as halogen-free tubing, this tubing produces minimal amounts of smoke and gas if exposed to an open flame, so it can be used in enclosed areas such as ships and tunnels.

A layer of conductive cloth protects wire and cable from signal interference caused by nearby equipment and devices.

Also known as breakout boots, these splitters insulate and seal the point where wire splits off from cable, or where cables exit from conduit.

Protect wire and cable without disconnecting them from an assembly. For a water-resistant seal, this wrap has an adhesive lining that melts when the tubing is heated and bonds to the underlying surface.

Unlike fiberglass and silica, this sleeving won't irritate skin, so it's easier to handle. It has a temperature rating of 1100° F or higher.

Tightly braided nylon fibers give this sleeving excellent abrasion resistance. As it wears, the fibers frizz and make the outer wall thicker for improved protection.

This sleeving withstands temperatures over 1000°F, such as in refineries.

Made of aluminum with a fiberglass liner, this sleeving reflects heat away from contents and withstands temperatures up to 390°F. A slit along the entire length makes it easy to install around wire, cable, and hose without disconnecting them.

Snaps keep this sleeving securely closed, yet permit quick access to contents and allow you to route wires in between the snaps. Use it to easily wrap around wire, cable, and hose without disconnecting them.

Organize and protect the cables on your Universal Robots arm without hindering its movement.

Silicone rubber coats this fiberglass sleeving to shed sparks and molten metal splash. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

Use this shielded sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.

The tightly braided construction makes this polyester sleeving abrasion resistant. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

A silicone rubber coating on this fiberglass sleeving protects against sparks and molten metal splash.

Add a layer of insulation to prevent electricity and heat from dissipating from wire and cable.

Use this PTFE sleeving in applications where temperatures reach up to 500° F.

Protect cable, hose, and pipe in high temperature environments—this sleeving withstands temperatures over 450° F. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Tight braiding makes this sleeving resistant to fraying when cut with scissors. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Rated UL 2024 and NFPA 262, this sleeving is approved for use in plenum spaces such as duct work and above a drop ceiling. It self-extinguishes and emits minimal amounts of smoke and gas during combustion. Stretch to fit over items for easy installation; it tightens around its contents for a secure fit.

Braided from thick plastic strands, this sleeving has excellent abrasion resistance. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Made of nylon, this sleeving is the most impact- and abrasion-resistant slit corrugated sleeving we offer. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them.

This sleeving reflects heat away from contents and withstands temperatures up to 900°F. The corrugated construction gives it impact and abrasion resistance similar to conduit, but with more flexibility.

A hinge along the entire length makes this one-piece sleeving easy to open for installation. Interlocking ridges overlap along the opening to protect contents from dust and dirt. The corrugated construction gives it the impact and abrasion resistance of conduit, with more flexibility.

The two halves of this sleeving nest into each other, fully enclosing contents. It has interlocking ridges that overlap to keep out dust and dirt. The corrugated construction gives it the impact and abrasion resistance of conduit, with more flexibility.

Made of neoprene rubber, this sleeving has excellent abrasion resistance. It can be quickly applied to hose or cable like tape, so it's a good option for emergency patches.