Multipurpose Build-Your-Own Latching Connectors
Combine power, USB, computer, and compressed air inserts to build a connector that sends signal, power, and data. A complete connector requires a hood, a base, two frames, and a male and female insert for each slot in the frame. The frames fit into the hood and base, and the inserts snap into the frame. Select components based on the number of slots needed. Once assembled, connectors are rated NEMA 4X, 12, and IP65 for protection against dirt, washdowns, and oil/coolant dripping.
Crimpers (sold separately) are required for wire installation for crimp-on connectors. They ratchet to ensure the correct pressure is applied to every crimp.
Use positioners (sold separately) with crimpers to hold pins and sleeves at the correct height while crimping.
Insertion/Extraction tools (sold separately) make it easier to install DB25 inserts.
| Computer Connection Type | Number of Poles | Voltage | Current | For Wire Gauge | For Number of Frame Slots | Max. Temp., °F | Number of Pins Included | Number of Sleeves Included | Specifications Met | Each | |
Crimp On | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| DB25 | 25 | 600V AC/600V DC | 4A | 23-20 | 1 | 255° | __ | 25 | C-UL Recognized Component, UL Recognized Component | 00000000 | 000000 |
| DB25 | 25 | 600V AC/600V DC | 4A | 23-20 | 1 | 255° | 25 | __ | C-UL Recognized Component, UL Recognized Component | 00000000 | 00000 |