McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    35 Products

    Terminal Type

    Performance

    Ring Terminals

    Image of Product. Noninsulated. Front orientation. Terminals, Ferrules, and Lugs. Ring Terminals, 90° Flag, Noninsulated.

    Noninsulated

    Secure wire to screw connections without worrying it will pop off. A go-to for terminal blocks, batteries, and circuit breaker panels, ring terminals encircle the whole screw shank, so they stay put better than spade and hook terminals when vibrated or pulled. They take a bit longer to install, however, because you have to completely remove the screw. Attach your wire with a crimping tool to avoid a damaged barrel and loose connection.
    90° Flag—Attach wire from the side when there's no room behind the terminal. The mounting tab meets the barrel at 90°, like a flag on a flagpole.
    Noninsulated—The basic, economical option when short circuits from nearby wiring aren't a concern.
    Ring
    For Wire
    Ga.
    For Screw
    Size
    Wd.
    Thk.
    Terminal
    Material
    Max. Temp.,
    ° F
    Max.
    Voltage
    Pkg.
    Qty.
    Pkg.
    90° Flag
     
    Noninsulated
    22 to 16No. 6
    		0.38"0.03"Tin-Plated Copper300Not Rated10073125K61000000
    22 to 16No. 8
    		0.38"0.03"Tin-Plated Copper300Not Rated10073125K6200000
    22 to 16No. 10
    		0.38"0.03"Tin-Plated Copper300Not Rated10073125K7300000
    16 to 14No. 8
    		0.38"0.03"Tin-Plated Copper300Not Rated10073125K6500000
    16 to 14No. 10
    		0.38"0.03"Tin-Plated Copper300Not Rated10073125K6600000
    12 to 10No. 8
    		0.38"0.04"Tin-Plated Copper300Not Rated5073125K6800000
    12 to 10No. 10
    		0.38"0.04"Tin-Plated Copper300Not Rated5073125K6900000
     

    Quick-Disconnect Terminals

    A good choice for machinery that needs to be frequently disconnected and reconnected for adjustment and repair. These terminals pair with other quick-disconnect terminals, so you can pop them apart whenever you need to break a connection. Attach your wire with a crimping tool to avoid a damaged barrel and loose connection.
    90° Flag—Attach wire from the side when there's no room behind the terminal. The mounting tab meets the barrel at 90°, like a flag on a flagpole.
    Nylon Insulation—In addition to preventing short circuits, this wear-resistant insulation protects wire from vibration and rubbing against nearby edges.
    Fully Insulated—Plastic covers the entire surface of the terminal, including the connection tab, so there’s no exposed metal to spark or short circuit when connecting to another terminal.
    Noninsulated—The basic, economical option when short circuits from nearby wiring aren't a concern.
    Single Crimp—Provides a secure enough grip for most jobs.
    Double Crimp—The choice for wire that’s frequently pulled, bent, or vibrated. Crimp the extended barrel in two places for an extra-strong grip on the wire.
    Tab
    Female
    For Wire
    Ga.
    Wd.
    Thk.
    Insulation
    Color
    Max. Temp.,
    ° F
    Max. Voltage
    Certification
    Terminal Material
    Pkg.
    Qty.
    Pkg.
    90° Flag
     
    Image of Product. Front orientation. Terminals, Ferrules, and Lugs. Quick-Disconnect Terminals, 90° Flag, Fully Insulated, Female.

    Female

    Nylon Fully Insulated—Single Crimp
    22 to 180.187"0.020"Red220600V AC
    600V DC    		CSA Certified, UL Listed
    		Tin-Plated Brass257820K11000000
    22 to 180.250"0.032"Red220600V AC
    600V DC    		CSA Certified, UL Listed
    		Tin-Plated Brass257820K1200000
    16 to 140.187"0.020"Blue220600V AC
    600V DC    		CSA Certified, UL Listed
    		Tin-Plated Brass257820K1300000
    16 to 140.250"0.032"Blue220600V AC
    600V DC    		CSA Certified, UL Listed
    		Tin-Plated Brass257820K1400000
    12 to 100.250"0.032"Yellow220600V AC
    600V DC    		CSA Certified, UL Listed
    		Tin-Plated Brass107820K840000
     
    Image of Product. Front orientation. Terminals, Ferrules, and Lugs. Quick-Disconnect Terminals, 90° Flag, Fully Insulated, Female.

    Female

    Nylon Fully Insulated—Double Crimp
    22 to 180.187"0.020"Red220600V AC
    600V DC    		CSA Certified, UL Listed
    		Tin-Plated Brass257820K4100000
    22 to 180.250"0.032"Red220600V AC
    600V DC    		CSA Certified, UL Listed
    		Tin-Plated Brass257820K4200000
    16 to 140.187"0.020"Blue220600V AC
    600V DC    		CSA Certified, UL Listed
    		Tin-Plated Brass257820K4300000
    16 to 140.250"0.032"Blue220600V AC
    600V DC    		CSA Certified, UL Listed
    		Tin-Plated Brass257820K4400000
    12 to 100.250"0.032"Yellow220600V AC
    600V DC    		CSA Certified, UL Listed
    		Tin-Plated Brass107820K9400000
     
    Image of Product. Front orientation. Terminals, Ferrules, and Lugs. Quick-Disconnect Terminals, 90° Flag, Noninsulated, Female.

    Female

    Noninsulated—Single Crimp
    22 to 180.187"0.020"—300Not RatedCSA Certified, UL Listed
    		Tin-Plated Brass1007769K8100000
    22 to 180.250"0.032"—300Not RatedCSA Certified, UL Listed
    		Tin-Plated Brass1007769K8200000
    16 to 140.187"0.020"—300Not RatedCSA Certified, UL Listed
    		Tin-Plated Brass1007769K8300000
    16 to 140.250"0.032"—300Not RatedCSA Certified, UL Listed
    		Tin-Plated Brass1007769K8400000
    16 to 140.250"0.032"—900Not Rated—Nickel-Plated Steel1008013K4100000
    12 to 100.250"0.032"—300Not Rated—Tin-Plated Brass1007769K9600000
    12 to 100.250"0.032"—900600V AC
    600V DC    		—Nickel-Plated Steel508013K280000
     

    Flame-Retardant Quick-Disconnect Terminals

    Image of Product. 90° Flag. Front orientation. Terminals, Ferrules, and Lugs. Flame-Retardant Quick-Disconnect Terminals, 90° Flag, Fully Insulated, Female.

    90° Flag

    If exposed to flame, these UL-rated terminals self-extinguish to help contain electrical fires. Use them to protect circuits that are within reach of sparks, flames, and molten splashes. They pair with other quick-disconnect terminals, so you can pop them apart whenever you need to break a connection. Attach your wire with a crimping tool to avoid a damaged barrel and loose connection.
    90° Flag—Attach wire from the side when there's no room behind the terminal. The mounting tab meets the barrel at 90°, like a flag on a flagpole.
    Nylon Insulation—In addition to preventing short circuits, this wear-resistant insulation protects wire from vibration and rubbing against nearby edges.
    Fully Insulated—Plastic covers the entire surface of the terminal, including the connection tab, so there’s no exposed metal to spark or short circuit when connecting to another terminal.
    Tab
    Female
    For Wire
    Ga.
    Wd.
    Thk.
    Insulation
    Color
    Max. Temp.,
    ° F
    Max. Voltage
    Flammability
    Rating
    Certification
    Terminal
    Material
    Pkg.
    Qty.
    Pkg.
    90° Flag
     
    Nylon Fully Insulated
    22 to 180.187"0.020"Red220600V AC
    600V DC    		UL 94 V-0
    		UL Listed
    		Tin-Plated Brass509240K21000000
    22 to 180.250"0.032"Red220600V AC
    600V DC    		UL 94 V-0
    		UL Listed
    		Tin-Plated Brass509240K2200000
    16 to 140.187"0.020"Blue220600V AC
    600V DC    		UL 94 V-0
    		UL Listed
    		Tin-Plated Brass509240K2300000
    16 to 140.250"0.032"Blue220600V AC
    600V DC    		UL 94 V-0
    		UL Listed
    		Tin-Plated Brass509240K2400000
    12 to 100.250"0.032"Yellow220600V AC
    600V DC    		UL 94 V-0
    		UL Listed
    		Tin-Plated Brass259240K2500000
     

    Heat-Shrink Quick-Disconnect Terminals

    Image of Product. Front orientation. Terminals, Ferrules, and Lugs. Heat-Shrink Quick-Disconnect Terminals, 90° Flag, Fully Insulated, Female.

    90° Flag

    Fully Insulated

    Female

    The plastic insulation shrinks when heated to tightly grip and seal the wire. In addition to blocking out contaminants, the heat shrink distributes strain when the wire is pulled or under tension for long periods.
    These terminals pair with other quick-disconnect terminals, so you can pop them apart whenever you need to break a connection. Attach your wire with a crimping tool to avoid a damaged barrel and loose connection.
    90° Flag—Attach wire from the side when there's no room behind the terminal. The mounting tab meets the barrel at 90°, like a flag on a flagpole.
    Plastic-Blend Insulation—Plastic covers the metal barrel to protect the wire from cuts, contamination, and short circuits. These terminals shrink at lower temperatures than polyolefin terminals, so they’re a good choice for thin or fine wire gauges that are sensitive to extreme heat.
    Fully Insulated—Plastic covers the entire surface of the terminal, including the connection tab, so there’s no exposed metal to spark or short circuit when connecting to another terminal.
    Tab
    Female
    For Wire
    Ga.
    Wd.
    Thk.
    Insulation
    Color
    Max. Temp.,
    ° F
    Max. Voltage
    Shrink
    Temp., ° F
    Terminal
    Material
    Pkg.
    Qty.
    Pkg.
    90° Flag
     
    Plastic-Blend Fully Insulated
    22 to 180.187"0.020"Red230300V AC
    300V DC    		275Tin-Plated Brass2572625K11000000
    22 to 180.250"0.032"Red230300V AC
    300V DC    		275Tin-Plated Brass2572625K1400000
    16 to 140.187"0.020"Blue230300V AC
    300V DC    		275Tin-Plated Brass2572625K1200000
    16 to 140.250"0.032"Blue230300V AC
    300V DC    		275Tin-Plated Brass2572625K1500000
    12 to 100.250"0.032"Yellow230300V AC
    300V DC    		275Tin-Plated Brass2572625K1300000
     

    Quick-Disconnect Terminal Assortments

    Image of Product. Front orientation. Terminals, Ferrules, and Lugs. Quick-Disconnect Terminal Assortments.
    Install, extend, or rewire a circuit without hunting down new terminals. These assortments include quick-disconnect terminals for most small and medium wire gauges. Labels in the lid include our part numbers, so it's easy to replenish your assortment.
    These terminals pair with other quick-disconnect terminals, so you can pop them apart whenever you need to break a connection. Attach your wire with a crimping tool to avoid a damaged barrel and loose connection.
    Nylon Insulation—In addition to preventing short circuits, this wear-resistant insulation protects wire from vibration and rubbing against nearby edges.
    Fully Insulated—Plastic covers the entire surface of the terminal, including the connection tab, so there’s no exposed metal to spark or short circuit when connecting to another terminal.
    Barrel Insulated—The wire is covered in plastic so it won't short circuit if touched by a screwdriver, nail, or another live wire.
    Noninsulated—The basic, economical option when short circuits from nearby wiring aren't a concern.
    Tab
    Female and Male
    No. of
    Pieces
    Includes
    Wd.
    Thk.
    Terminal
    Material
    Max. Temp.,
    ° F
    Max. Voltage
    Shrink
    Temp., ° F
    Container
    Type
    Each
    Nylon Fully Insulated, Nylon Barrel Insulated, and Noninsulated
    600Quick-Disconnect Terminals (22 to 18 AWG, 16 to 14 AWG, and 12 to 10 AWG)
    Heat-Shrink Quick-Disconnect Terminals (22 to 18 AWG, 16 to 14 AWG)
    Piggyback Quick-Disconnect Terminals (16 to 14 AWG)
    90° Flag Quick-Disconnect Terminals (16 to 14 AWG)
    Terminal Splitters    		0.187"
    0.250"    		0.020"
    0.032"    		Brass
    Copper    		220600V AC
    600V DC    		275Metal Case70335K110000000
     
    back to top