Our most sensitive limit switches, these switches actuate with the slightest push for a high degree of accuracy.

Rugged enough for mining operations, these limit switches require a high actuation force, like heavy rocks moving on a conveyor.

Combine an actuator and a switch to assemble the exact limit switch you need.

Protect machinery and ensure the safety of personnel—these switches will open the circuit when actuated even if a spring fails or the contacts stick.

Prevent equipment from automatically restarting—these switches must be manually reset each time they're actuated.

Secure these switches into panel cutouts using mounting nuts. They have a slim body so they can also be stacked together or fit into tight spaces.

Safely open or close a circuit near ignitable gases and dust—the housing on these switches seals in anything that could ignite flammable material.

Built for tight spaces exposed to water, these switches have a housing that's less than 1" long and IP67 rated for protection from temporary submersion.

Keep out dirt and moisture—the sealed housing on these switches is watertight and meets MIL-PRF-8805.

Actuate these switches with a fraction of the force of other subminiature switches for increased responsiveness. Among the smallest snap-acting switches we offer, they fit into the tiniest of spaces.

Smaller than standard snap-acting switches, these switches trigger actions in tight spaces. They’re used in components as small as computer mice and engine restart switches.

Rated NEMA 4 , these enclosed switches have a sealed actuator for protection from washdowns.

Rated IP67, these switches have an enclosure that shields their interior during temporary submersion. They open and close circuits in a snap—their quick actuation minimizes arcing and keeps contacts from sticking.

The convenient, modern alternative to mechanical safety switches. These RFID switches are easier to install, fit a wider range of access points, and can mount horizontally.

Block access to machinery while it's running. These safety switches link to a single actuator, so no other RFID tag or card can interfere.

Prevent accidental bumps or vibration from triggering these safety switches unnecessarily—a strong magnet maintains the RFID signal between the actuator and switch until it's intentionally opened.

These switches withstand temporary submersion.

Control cranes and other mobile machinery in dirty, outdoor, and wet environments without damaging your switch.

Never worry about your pendant switch losing power. These pendant switches generate enough power from pushing the button to send a signal to a receiver up to 330 feet away.

More durable than standard metal switches, these can handle tough, repetitive use.

Actuate these switches with a quick push. A housing seals in anything that could ignite flammable material, so you can use them where ignitable gas and dust may be present.

Save space on a panel by using one switch to perform multiple switching functions.

A quick push is all it takes to actuate these switches.

The built-in contact block in these switches extends behind the panel half the depth of most other 22 mm switches, saving valuable space.

Mount these switches in panel cutouts where changing a battery or routing wires might be difficult—they power themselves when you push the button.

Install in 14 mm dia. cutouts.

Install in 12 mm dia. cutouts.

Because these switches mount flush against a panel, they're easy to clean and hard to damage.

Actuate these switches with a quick push.

Operate low-voltage devices that require less than 48 volts, such as doorbells and buzzers.

Send a signal from your circuit board with the push of a button.

A lightweight yet durable alternative to stainless steel enclosed switches, these aluminum enclosed switches withstand corrosion, oil, and washdowns.

Keep a switch within reach—but not in the way. These mount to the underside of desks, tables, and shelves to keep work surfaces clear and reduce the risk of accidental presses.

These familiar push-button switches mount to flat surfaces.

Grip and twist a lever to turn these switches on or off—they’re designed to prevent accidental actuation. Install them into standard-sized panel cutouts.

Thanks to their ability to handle higher current than switches with contact blocks, these switches are often found in applications from large motors to warehouse lighting systems.

Avoid accidental actuation—these switches won’t turn on or off until you grip and twist the lever. Install in a 16 mm dia. cutout.

Choose an actuator and contact block to make your own 22 mm metal switch.

Choose an actuator and contact block to make your own 30 mm switch.

Maximize the space in a panel—these switches are half the size of most toggle switches.

These switches meet MIL-S-3950.

Control equipment from up to 40 feet away—these switches include a transmitter and a receiver that connects to equipment.

Keep your hands free for other tasks by triggering switches with your foot.

Use this switch for intermittent, light-duty applications.

Rated NEMA 6P and IP68, these switches are protected against washdowns, corrosion, and temporary submersion.

Designed for use near ignitable gases, fibers, and dust, these switches have a housing that seals in anything that could ignite flammable material. They require a key to turn circuits on or off, preventing accidental activation and limiting access.

Install these key switches in 3/4" dia. panel cutouts. They require a key to turn circuits on or off, limiting access to sensitive equipment.

The wide surface of these switches makes them easy to press on and off, even if your hands are full and you need to use an elbow.

Step on these mats to control doors, lights, or alarms.

Prevent personnel from getting too close to dangerous equipment while it’s running. Step anywhere on these mats and they can turn on warning lights and alarms or shut down equipment.

Customize the length of these switches by cutting them from a 50-foot roll.

These mats fit under carpeting or anywhere else you want to hide them.

Rated IP67 and NEMA 6, these switch mats withstand washdowns.

An infrared light beam senses the lightest finger contact to switch a circuit on or off.

Mounted to your circuit board, these switches trigger when magnetic components get near, and reset as they move away.

Use a free, downloadable app with these switches to automate alarms in your facility, such as sounding a buzzer if a trailer door is opened after a certain time.

Send signals in response to changing magnetic fields to trigger processes or monitor position, speed, and current.

Prevent unauthorized use—these switches require coded magnets to actuate. They cannot be bypassed using ordinary magnets.