60 gal. Containers | McMaster-Carr

	Drums								Loose-Fitting Lids		Tight-Fitting Lids with Leverlock Closing Ring
	Cap., gal.	Dia.	Ht.	Bottom ID	Ga.	Wt. Cap., lb.		Each		Each		Each
304 Stainless Steel



		60	25 1/4"	30"	24"	16	500	4562T25	0000000	4562T35	0000000	4562T46	0000000


		316 Stainless Steel



				60	25 1/4"	30"	24"	16	500	4562T51	00000000	4562T61	000000	4562T71	000000

Plastic Tanks

These tanks are UV resistant for long-term outdoor service.

Horizontal

	Wd.	Dp.	Ht.	Thk.	Fill Opening Dia.	Graduations	Color	Clarity	Max. Temp., ° F	Includes		Each
Polyethylene



	60	38 1/2"	23"	25 3/4"	1/4"	4 1/2"	5 gal., 19 L	White	Semi-Clear	100	Vented Fill Cap	3764K52	0000000

Replacement Tank Caps

		Each
Replacement Fill Cap for 4 1/2" Fill Opening Dia.	3764K76	000000

Horizontal with Drain

										Drain
	Cap., gal.	Wd.	Dp.	Ht.	Thk.	Fill Opening Dia.	Graduations	Color	Clarity	Pipe Size	Gender	Seal Material	Max. Temp., ° F	Includes		Each
Polyethylene



		60	38 1/2"	23"	25 3/4"	1/4"	4 1/2"	5 gal., 19 L	White	Semi-Clear	1 NPT	Female	Fluoroelastomer	100	Vented Fill Cap	3764K32	0000000

Replacement Tank Caps

		Each
Replacement Fill Cap for 4 1/2" Fill Opening Dia.	3764K76	000000

Collapsible Spill-Control Trays


		Style B

A flexible alternative to spill-control pallets, these trays collapse when not in use for easy storage.

							Bottom Inside			Collapsed
	Style	For No. of 55 gal. Drums	Cap., gal.	Lg.	Wd.	Ht.	Lg.	Wd.	Color	Lg.	Wd.	Ht.	Features		Each
PVC-Coated Polyester Fabric



		B	2	60	48"	48"	6"	44"	44"	Yellow	45 1/2"	8"	7"	Carrying Strap	1808N12	0000000

ASME-Code Compressed Air Storage Tanks


Horizontal	Horizontal with Mounting Plate	Vertical	Vertical with Mounting Plate

These tanks have drain ports on the bottom to remove condensation. All other ports can be used as inlets or outlets in any configuration.

Steel tanks are primed or powder coated for exterior corrosion resistance.

Note: Per ASME code, all tanks are water tested. Those made without a corrosion-resistant coating or material will have rust on the interior.

With Mounting Plate—Tanks with mounting plate have a platform where you can secure motors, pumps, and other components.

Epoxy Liner—Epoxy-lined steel tanks also resist interior corrosion that can result from moisture in your compressed air.

			Ports			Overall
	Cap., gal.	Max. Pressure, psi	Total No. of	Gender	Sizes	Lg.	Dia.	Ht.	Wall Thk.	Temp. Range, ° F	Certification	Includes		Each
Horizontal without Mounting Plate







				Powder-Coated Steel

				60	200	9	Female	1/4 NPT Port (1 Ea.) 1/2 NPT Port (1 Ea.) 3/4 NPT Port (2 Ea.) 1 NPT Port (2 Ea.) 2 NPT Port (2 Ea.) 1/2 NPT Drain Port (1 Ea.)	48 3/4"	20"	23"	1/8"	-20 to 400	ASME BPVC.VIII.1	Plugs	4377K53	000000000




						Epoxy-Lined Powder-Coated Steel

						60	200	9	Female	1/4 NPT Port (1 Ea.) 1/2 NPT Port (1 Ea.) 3/4 NPT Port (2 Ea.) 1 NPT Port (1 Ea.) 1 1/2 NPT Port (1 Ea.) 2 NPT Port (2 Ea.) 1/2 NPT Drain Port (1 Ea.)	49"	20"	23"	1/8"	-20 to 400	ASME BPVC.VIII.1	Plugs	9426K23	00000000


						Horizontal with Mounting Plate







										Powder-Coated Steel

										60	200	9	Female	1/4 NPT Port (1 Ea.) 1/2 NPT Port (1 Ea.) 3/4 NPT Port (2 Ea.) 1 NPT Port (1 Ea.) 2 NPT Port (2 Ea.) 1/2 NPT Drain Port (1 Ea.)	48 3/4"	20"	25"	1/8"	-20 to 400	ASME BPVC.VIII.1	Plugs	4377K33	00000000




												Epoxy-Lined Powder-Coated Steel

												60	200	9	Female	1/4 NPT Port (1 Ea.) 3/4 NPT Port (2 Ea.) 1 NPT Port (1 Ea.) 1 1/2 NPT Port (2 Ea.) 2 NPT Port (1 Ea.) 1/2 NPT Drain Port (1 Ea.)	49"	20"	25"	1/8"	-20 to 400	ASME BPVC.VIII.1	Plugs	9426K13	00000000


												Vertical without Mounting Plate







																Powder-Coated Steel

																60	200	8	Female	1/4 NPT Port (1 Ea.) 3/4 NPT Port (4 Ea.) 2 NPT Port (2 Ea.) 1/2 NPT Drain Port (1 Ea.)	—	20"	50 1/2"	1/8"	-20 to 400	ASME BPVC.VIII.1	Plugs	4376K11	000000




																		Epoxy-Lined Powder-Coated Steel

																		60	200	8	Female	1/4 NPT Port (1 Ea.) 3/4 NPT Port (4 Ea.) 2 NPT Port (2 Ea.) 1/2 NPT Drain Port (1 Ea.)	—	20"	50 1/2"	1/8"	-20 to 400	ASME BPVC.VIII.1	Plugs	9554K66	00000000


																		Vertical with Mounting Plate







																				Powder-Coated Steel

		60																		200	8	Female	1/4 NPT Port (1 Ea.) 3/4 NPT Port (3 Ea.) 1 1/2 NPT Port (1 Ea.) 2 NPT Port (2 Ea.) 1/2 NPT Drain Port (1 Ea.)	—	20"	52"	1/8"	-20 to 400	ASME BPVC.VIII.1	Plugs	4376K22	00000000




																				Epoxy-Lined Powder-Coated Steel

				60																200	8	Female	1/4 NPT Port (1 Ea.) 3/4 NPT Port (3 Ea.) 1 1/2 NPT Port (1 Ea.) 2 NPT Port (2 Ea.) 1/2 NPT Drain Port (1 Ea.)	—	20"	52"	1/8"	-20 to 400	ASME BPVC.VIII.1	Plugs	9554K62	00000000

Plastic Spill-Control Pallets


Style A	Style C

Ramps for Style A	Ramp For Style C

When spills happen, these pallets contain the mess. They’re made of polyethylene, so they won’t degrade from most chemicals. They also meet EPA standards for liquid storage. To minimize potential leak points, these pallets are built without a drain. You’ll need to pump or clean out liquids after a spill—remove the grating to access the interior.

When choosing a pallet, consider the surface area and capacity you need. For number of 55-gallon drums gives you a sense of the surface area of your pallet, while capacity tells you how much liquid it can hold. When used correctly, these pallets meet EPA 40 CFR 264.175. Choose a pallet that’s large enough to hold either 10% of the total capacity of all the containers on it or the full capacity of the largest container—whichever is greater.

Polyethylene—Polyethylene pallets last longer than recycled polyethylene pallets.

Style A—Styles A and E have U-channel connectors that let you link multiple units of the same style to create a larger spill-control surface. They have a low profile that makes it easy to load containers.

Stackable—Stackable pallets sit flush when stacked, so you can access entry points with your forks.

Ramps—Add a ramp to wheel drums onto your pallet with a hand truck.

	Pallets																		Ramps
								Usable					Max. Fork
	Style	For No. of 55 gal. Drums	Cap., gal.	Wt. Cap., lb.	Lg.	Wd.	Ht.	Lg.	Wd.	Wt., lb.	Color	No. of Entry Points for Forklifts	Wd.	Ht.	With Drain	Space Saving Features		Each	Wt. Cap., lb.		Each
Polyethylene—EPA Compliant 40 CFR 264.175



		A	4	60	10,000	52 1/2"	51 1/2"	6 1/2"	50 1/2"	50 1/2"	65	Yellow	4	7"	2"	No	Stackable	14195T11	0000000	1,500	14195T44	0000000


		C	1	60	800	40"	40"	12"	26"	26"	51	Yellow	2	7"	4 1/2"	No	Stackable	12635T81	000000	700	12635T61	000000

Low-Profile Rectangular Plastic Tanks

Tanks																		Replacement Caps
									Drain
Cap., gal.	Wd.	Dp.	Ht.	Thk.	Fill Opening Dia.	Graduations	Color	Clarity	Pipe Size	Gender	Material	Seal Material	Max. Temp., ° F	UV Protection	Includes		Each		Each







			Polyethylene

			60	42"	26"	17"	1/4"	6"	5 gal.	White	Semi-Clear	1 NPT	Female	Polypropylene	Santoprene	120	UV Resistant	Vented Fill Cap	5152T42	0000000	5152T34	000000

Mounting Bands

			Mounting Holes
Powder-Coated Steel


26"	12	2	1/2"	No	2	5152T52	000000

Spill-Control Tubs


Style A	Lid For Style A (Sold Separately)

Style A—Style A has recessed rings to secure drums and “HAZARDOUS” stenciled on the side.

	Tubs												Lids
									Max. Fork
	Style	For No. of 55 gal. Drums	Cap., gal.	Wt. Cap., lb.	Dia.	Ht.	Color	No. of Entry Points for Forklifts	Wd.	Ht.		Each		Each
Polyethylene—EPA Compliant 40 CFR 264.175



		A	1	60	900	30 1/4"	26"	Orange	2	8 1/4"	5 3/4"	39855T8	0000000	39855T9	0000000

Hydraulic Tanks

Style C

Store fluids for a hydraulic power unit or circulating-oil system. Choose a tank capacity about three times greater than your requirement to allow for heat dissipation. Tanks with only a drain connection require you to drill your own inlet/outlet connection and add pipe suction flanges (sold separately). Flanges seal pipes that pass through the top plate of your tank.

Dual Chamber Tanks—Dual chamber tanks have a divider that allows particles to settle on one side before fluid is returned to your line.

Style C—To install the breather vent to Style C tanks, drill a hole in the tank.

			Overall			Drain			Mounting
	Style	Cap., gal.	Lg.	Wd.	Ht.	Pipe Size	Dash Size	No. of Ports	Fasteners Included	No. of Holes	Hole Dia.	Max. Temp., ° F		Each
Steel







				Dual Chamber Tanks

				C	60	42 3/8"	30"	16 5/8"	3/4 NPT	12	1	No	4	7/16"	212	62945K35	000000000

Accessories and Replacements for Hydraulic Tanks

Pipe Suction Flanges

				Mounting Hole
For Pipe Size	For Cutout Dia.	Material	Mounting Fasteners Included	Ctr.-to-Ctr.	Lg	Wd.	Includes		Each
1/2	4 5/16"	Steel	Yes	4 1/4"	7/8"	7/16"	Top Plate, Bottom Plate, Gasket, Washer	62875K21	000000
3/4	4 5/16"	Steel	Yes	4 1/4"	7/8"	7/16"	Top Plate, Bottom Plate, Gasket, Washer	62875K22	00000
1 1/4	4 5/16"	Steel	Yes	4 1/4"	7/8"	7/16"	Top Plate, Bottom Plate, Gasket, Washer	62875K23	00000
1 1/2	4 5/16"	Steel	Yes	4 1/4"	7/8"	7/16"	Top Plate, Bottom Plate, Gasket, Washer	62875K24	00000
2	4 5/16"	Steel	Yes	4 1/4"	7/8"	7/16"	Top Plate, Bottom Plate, Gasket, Washer	62875K25	00000

Vents

Breather vents prevent excess pressure in tanks and allow a free flow of air.

					Cap
Pipe Size	Thread Type	Gender	Material	Removes Particle Size Down To, μm	Dia.	Ht.	Overall Ht.	Hex Wd.		Each



	1/2	NPT	Male	Plastic	40	1 5/8"	3/4"	1 7/8"	1"	62875K11	00000


	3/4	NPT	Male	Plastic	40	1 5/8"	3/4"	1 7/8"	1 1/8"	62875K12	0000

Flange-Mount Breather Vents

Flange

Mount

Breather vents prevent excess pressure in tanks and allow a free flow of air.

	Material						Strainer			Mounting Hole
For Cutout Dia.	Cap	Strainer	Gasket	Removes Particle Size Down To, μm	Cap Dia.	Flange Dia.	Dia	Ht.	Mounting Fasteners Included	Lg.	Wd.	Bolt Circle Dia.	Mount Type		Each
2 1/8"	Zinc-Plated Steel	Plastic	Rubber	40	3"	3 1/4"	1 7/8"	3 13/16"	Yes	1/4"	3/16"	2 7/8"	Flange	62875K13	000000

Level and Temperature Indicators for Styles B and C Tanks

Nylon With Steel

Guard

For Hole
Dia.	No. of Holes	Connection Ctr.-to-Ctr.	Overall Ht.	Window Ht.	Body Wd.	For Max. Tank Wall Thk.	Max. Pressure @ Temp.	Temp. Range, ° F	Thermometer Temp. Measurement Range, ° F	Material	Guard Material	Window Material		Each
1/2"	2	5"	6 3/8"	3 7/8"	13/16"	1/2"	50 psi @ 70° F	-40 to 210	0 to 220	Buna-N, Nylon, Steel	Steel	Nylon	4748K29	000000

		Each
Replacement Buna-N Gasket for 62945K35 and 62945K37	62945K55	000000
Replacement Steel Cover for 62945K35 and 62945K37	62945K54	00000

High-Pressure ASME-Code Compressed Air Storage Tanks

Vertical

Tanks have drain ports on the bottom to remove condensation. All other ports can be used as inlets or outlets in any configuration.

Note: Per ASME code, all tanks are water tested and will have rust on the interior.

Primed Steel—These tanks are made of steel that's primed to resist exterior corrosion.

600 psi Maximum Pressure—Able to withstand pressures up to 600 psi, these tanks store compressed air for use in high-pressure applications.

			Ports			Overall
	Cap., gal.	Max. Pressure, psi	Total No. of	Gender	Sizes	Dia.	Ht.	Wall Thk.	Temp. Range, ° F	Certification	Includes		Each
Vertical without Mounting Plate







				Gray Primed Steel

				60	600	8	Female	1/4 NPT Port (1 Ea.) 3/4 NPT Port (4 Ea.) 2 NPT Port (2 Ea.) 1/2 NPT Drain Port (1 Ea.)	20"	50 1/2"	3/8"	-20 to 400	ASME BPVC.VIII.1	Plugs	9795K2	000000000

Plastic Spill-Control Pallets with Drain


Style A	Style B

Ramps for Style A	Ramp For Style B

Speed up cleaning after a spill—these pallets have a built-in drain, so you can empty liquid without removing containers or grates. For even deeper cleaning, the grating can be removed. Made of polyethylene, these pallets won’t degrade from most chemicals, including acids. All meet EPA storage standards by containing leaks from hazardous liquids.

Polyethylene—Polyethylene pallets last longer than recycled polyethylene pallets.

Style A—Style A have a low profile that makes it easy to load containers. They also have U-channel connectors that let you link multiple units of the same style to create a larger spill-control surface.

Stackable—Stackable pallets sit flush when stacked, so you can access entry points with your forks.

Ramps—Add a ramp to wheel drums onto your pallet with a hand truck.

	Pallets																	Ramps
								Usable					Max. Fork
	Style	For No. of 55 gal. Drums	Cap., gal.	Wt. Cap., lb.	Lg.	Wd.	Ht.	Lg.	Wd.	Wt., lb.	Color	No. of Entry Points for Forklifts	Wd.	Ht.	Space Saving Features		Each	Wt. Cap., lb.		Each
Polyethylene—EPA Compliant 40 CFR 264.175



		A	4	60	10,000	52 1/2"	51 1/2"	6 1/2"	50 1/2"	50 1/2"	65	Yellow	4	7"	2"	Stackable	8350N19	0000000	1,500	14195T44	0000000


		B	1	60	800	40"	40"	12"	26"	26"	51	Yellow	2	7"	4 1/2"	Stackable	8350N11	000000	700	12635T61	000000

			Mounting Holes
	For Tank Dp.	Ga.	No. of	Dia.	Mounting Fasteners Included	Pkg. Qty.		Pkg.
Powder-Coated Steel



		26"	12	2	1/2"	No	2	5152T52	000000