Safely dispose of static-charged waste. When placed on a grounded floor, these containers drain static charges from the waste into the floor. With their charge removed, waste won’t spark and ignite flammable chemicals or damage sensitive electronics, even if you tip the container over accidentally. The conductivity of these containers also won’t fade over time. All have an electrostatic discharge symbol on the side, so it’s clear what to drop in them. If you line these containers with garbage bags, use static-control garbage bags or the charge won’t drain properly.

Since they meet ANSI and IEC standards for protection from electrostatic discharge, these containers are approved for use in ESD control programs in the U.S. and Europe.

Static-control dollies lock onto 44-gal. containers for mobility. Two of the five casters are conductive, so static transfers through them when used on a grounded floor.

Store large quantities of liquid in these flat-bottomed tanks. They have vented fill caps so air can flow in and out.

Also known as vacuum degassing chambers, these remove trapped air from mixtures such as paint and mold resins. The fittings on the hose contain a gasket that allows you to connect the hose to flared fittings.

Aluminum containers are lightweight, corrosion resistant, and good for general use.

Acrylic lids are more durable than glass lids. They’re commonly used to eliminate air bubbles in hard setting materials, such as silicone and polyurethane.

Replacement lids do not include hardware or seal.

Also known as closed-head pails, these jugs have a small top opening. Made of HDPE, they resist chemicals and prevent the absorption of harsh solvents, cleaning agents, and adhesives to safely ship hazardous liquids. These jugs are tested to comply with United Nations regulations for packaging and shipping hazardous material over land, sea, or air. These regulations aim to prevent hazardous spills caused by accidents or rough package handling.

Note: It is the responsibility of the shipper to follow regulatory guidelines for properly packaging and labeling all hazardous materials and ensure the appropriate method for shipping.

These tanks have drain ports on the bottom to remove condensation. All other ports can be used as inlets or outlets in any configuration.

Tanks with mounting plate have a platform where you can secure motors, pumps, and other components.

Steel tanks are primed or powder coated for exterior corrosion resistance. Epoxy-lined steel tanks also resist interior corrosion that can result from moisture in your compressed air.

Stainless steel tanks are more corrosion resistant than steel tanks.

Safety regulations restrict sales to the listed jurisdictions/areas.

Note: Per ASME code, all tanks are water tested. Those made without a corrosion-resistant coating or material will have rust on the interior.