Send signal and data to operate, measure, or regulate automated equipment such as conveyors and CNC machines.

Nearly two-thirds the diameter of standard control cable, this cable fits in tight spaces. It sends signal and data to operate, measure, or regulate automated equipment.

Also known as festoon cable, this flat cable fits in confined spaces such as overhead cranes and hoists. It sends signal and data to operate, measure, or regulate automated equipment.

Often used in electronic prototyping or in the interior of computers, this flat cable is ultra flexible with small-gauge wires so it fits in tight spaces.

The insulation has excellent resistance to oil, so this cable can be used near motors. Often used in automated applications, it withstands continuous motion without degrading data or signal transmission

Rated to 17,000 volts AC or higher, this cable is often used in oil drilling, robotics, and festoon systems. It withstands continuous motion without degrading data or signal transmission. The flat shape allows it to fit in tight spaces.

With a life span of more than 20 million high-speed flex cycles, this cable lasts twice as long as standard continuous-flex cable. The frequent motion will not degrade data or signal transmission.

For use in tight spaces, this cable has up to a 40% smaller OD than standard continuous-flex cable. It withstands continuous motion without degrading data or signal transmission.

Often used in computers, small electronics, and electronic prototyping, this cable is very flexible with small gauge wire to handle tight curves in narrow spaces.

This cable can be stretched by about 40% and return to its original length, making it useful for applications where cable is in motion. It's often sewn into garments or used with equipment that must be worn.

Often used to wire pendant switches, this cable hangs from an overhead connection. Also known as bus drop cable.

Connect devices such as sensors, programmable logic controllers, and actuators to an automated network.

This cable is approved for use in vertical shafts and large facilities with multiple levels. It's often used for low-current circuits such as intercoms and security systems.

Control these flexible, ready-to-use cables with the attached trigger-style spring-return lever. Weave them around obstructions to operate valves, throttle controls, and HVAC damper controls from a distance.

Use these cables for high-precision motion control. Tighten the locknut to secure your setting in applications where severe vibration is a concern. Flexible for weaving around obstructions, these ready-to-use cables operate valves, throttle controls, and HVAC damper controls from a distance.

Pair these cables with a knob or lever to operate valves, throttle controls, and HVAC damper controls from a distance. They're flexible for weaving around obstructions.

Well-suited for damp environments, these control cables have stainless steel fittings for excellent corrosion resistance. Pair them with a knob or lever to operate valves, throttle controls, and HVAC damper controls from a distance. They're flexible for weaving around obstructions.

Also known as socket-end swage fittings, install these ball-with-shank-end fittings with a roller swage press for a strong, permanent hold.

Also known as socket-end swage fittings, install these clevis-end fittings with a roller swage press for a strong, permanent hold.

Feed the wire rope into the opening at the bottom of these clevis-end fittings and through the body for a quick and simple installation.

Feed the wire rope into the opening at the bottom of these hook-end fittings and through the body for a quick and simple installation.

Add a mounting-plate to wire rope without having to fray the rope or use a compression tool.

Add an eye-end to wire rope without having to fray the rope or use a compression tool.

Install these stud-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Install these swivel-hook-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Compress the thin shank wall with a hand tool to attach these light duty mounting-plate-end fittings. They are also known as hand swage fittings.

Compress the thin shank wall with a hand tool to attach these light duty eye-end fittings. They are also known as hand swage fittings.

Install these clamps without any specific orientation, slide the nut over the rope and tighten it onto the threaded halves with a torque wrench.

These clamps have a forged fabrication and are reliable in critical applications. They are not for making slings. These must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end. They’re also known as wire rope clips.

Make a removable loop without specialty tools for use in noncritical applications, such as fencing. Also known as tiller clamps.

Kits include clamps and thimbles to support a wire rope loop and prevent it from fraying. Clamps must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end.

These compression sleeves are designed to meet lifting specifications.

These kits include two compression sleeves paired with two thimbles. The thimbles support the wire rope loops and prevent it from fraying.

Also known as standard-pattern thimbles, these provide better protection against fraying than light duty thimbles.

These thimbles are also known as thin pattern thimbles.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

This wire rope provides a good balance of abrasion resistance and flexibility.

This stainless steel wire rope withstands outdoor and washdown applications. The construction of this wire rope provides a good balance of abrasion resistance and flexibility.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys and the stainless steel wire rope withstands outdoor and washdown applications.

This wire rope provides a good balance of abrasion resistance and flexibility.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

This wire rope provides a good balance of abrasion resistance and flexibility.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

This stainless steel wire rope withstands outdoor and washdown applications. The construction of this wire rope provides a good balance of abrasion resistance and flexibility.

This stainless steel wire rope withstands outdoor and washdown applications. The construction of this wire rope provides a good balance of abrasion resistance and flexibility.

This wire rope provides a good balance of abrasion resistance and flexibility.

This wire rope provides a good balance of abrasion resistance and flexibility.

This braided wire has a stiff construction for use as bracing and guy wires.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

The superior corrosion resistance of nickel-copper makes this braided wire best for use with salt water and acidic- and alkaline-based solutions.

This wire rope provides a good balance of abrasion resistance and flexibility.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

More wires per strand than other wire rope gives this wire rope the flexibility required for repeat bending over drums and pulleys.

Use this wire rope when lifting in areas that are frequently washed down and require a rope that counteracts rotation.

This wire rope provides a good balance of abrasion resistance and flexibility.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

To counteract rotation while under load, the outer strands are wound in the opposite direction of the core.

The swivel fork allows the lanyard to rotate freely.

Made to meet stringent military standards, the fittings on these lanyards meet MS 20668 and MS 21259.

Attach to a threaded anchor or hole for support and use the loop to secure the suspended material.

Create a choker loop around a supporting structure with the snap-hook end and use the loop to secure the suspended material.

Made to meet stringent military standards, the fittings on these lanyards meet MS 20668.

For use in washdown environments, this wire rope has better corrosion resistance than the galvanized steel wire rope.

The galvanized finish resists corrosion.

For use in washdown environments, this wire rope has better corrosion resistance than the galvanized steel wire rope.

The swivel hook with latch installed on one end, prevents the wire rope from twisting. It is for use with winches.

These all-plastic lanyards are an economical alternative to rope and wire rope lanyards.

The chain has flat links that fold back on themselves for maximum flexibility. Use the split ring on one end to hold tags and keys.

Made of steel, these shafts are stronger than stainless steel flexible shafts.