These internally threaded rod ends have an eyelet and a ball that swivels to support angular misalignment. Also known as rod-end bearings.

Connect your grease gun to the fitting to lubricate.

A carbon fiber-reinforced insert or PTFE liner reduces wear, handles shock loads, and eliminates the need for lubrication.

These internally threaded rod ends have an oil-embedded bronze insert that slowly releases lubricant over time. Connect your grease gun to the fitting to relubricate.

An oil-embedded bronze insert slowly releases lubricant to the rod end. Connect your grease gun to the fitting to relubricate.

Made to extremely tight tolerances, these internally threaded rod ends are for applications that require positioning accuracy, such as accelerators and other types of control linkages.

Made of cadmium-plated steel, these internally threaded rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends.

With at least 55° of ball swivel, these externally threaded rod ends accommodate greater misalignment than any other we offer.

These anodized aluminum rod ends are lighter than stainless steel rod ends and have good corrosion resistance. Internal threads mate with rod end bolts, threaded rods, and other components with male threads.

Made of stainless steel, these externally threaded rod ends provide excellent corrosion resistance.

Made of impact-resistant nylon, these internally threaded rod ends withstand corrosion as well as fuels, lyes, and weak acids. They do not require lubrication and are 80% lighter than steel rod ends.

These externally threaded steel rod ends handle loads that are at least 25% higher than other comparably sized rod ends.

Along with internal threads, these rod ends have a double row of precision ball bearings that allows high speeds and smooth operation.

These internally threaded rod ends have an innovative body design that keeps the ball from being pushed out when supporting thrust loads.

Without changing the ID, these inserts handle some misalignment on rod ends.

Similar to turnbuckles, these rods have right-hand threads on one end and left-hand threads on the other so you can make a linkage that adjusts for tension. Add right- and left-hand threaded rod ends to build your linkages.

Designed for use with right-hand, internally threaded rod ends, these rods have right-hand threads on both ends. Use them for remote valve operators, throttle controllers, shifting mechanisms, and virtually any push/pull assembly.

These internally threaded linkages have a slippery PTFE liner that reduces wear and eliminates the need for lubrication.

These linkages offer excellent wear resistance. They consist of internally threaded ball joint rod ends with a ball stud attached to simplify mounting.

Along with excellent wear resistance, these linkages have a grease fitting for easy lubrication. An internally threaded rod end connects to threaded rods, studs, and other parts with male threads.

An oil-embedded bronze insert slowly releases lubricant throughout the life of the joint.

Made of stainless steel, these ball joint linkages offer more corrosion resistance than steel and zinc ball joint linkages.

These ball joint linkages are made of steel.

Use these externally threaded linkages to create inline pivoting connections.

These steel rod ends are machined to SAE standards.

In addition to offering superior chemical resistance, these lightweight, fiber-reinforced nylon rod ends also reduce noise and vibration.

Thread or weld the unfinished shank of these rod ends to meet your specific linkage needs.

These rod end bolts are good for wet and corrosive environments—for maximum mounting flexibility, cut the fully threaded shaft to whatever length you need.

These alloy steel rod end bolts have the highest tensile strength of any fully threaded rod end bolt we offer.

Also known as swing bolts and eyebolts, these internally threaded rod end bolts have no moving parts. They're designed to make pivoting or hinge movements in applications that don't need to compensate for misalignment.

These black-oxide steel rod end bolts are heat treated for added strength.

With a rubber bushing, these bolts reduce noise and vibration—attach them to rods, pipes, tubes, and cable linkages that have male threading. They’re commonly known as isolated rod ends.

Good for general purpose applications where corrosion and high strength aren’t a concern, these rod end bolts are made of carbon steel.

Attach these nuts to rods, pipes, and tubes to make pivoting and hinge movements where misalignment is not a concern.

Use these cables for high-precision motion control. Tighten the locknut to secure your setting in applications where severe vibration is a concern. Flexible for weaving around obstructions, these ready-to-use cables operate valves, throttle controls, and HVAC damper controls from a distance.

Control these flexible, ready-to-use cables with the attached trigger-style spring-return lever. Weave them around obstructions to operate valves, throttle controls, and HVAC damper controls from a distance.

Well-suited for damp environments, these control cables have stainless steel fittings for excellent corrosion resistance. Pair them with a knob or lever to operate valves, throttle controls, and HVAC damper controls from a distance. They're flexible for weaving around obstructions.

A splined core limits contact points on the cable’s liner, so the core slides back and forth smoothly and keeps the cable from twisting. Pair these cables with a knob or lever to operate valves, throttle controls, and HVAC damper controls from a distance. They're flexible for weaving around obstructions.

Joints have a fixed 2 1/2" overall length.

These pin-and-block style U-joints work at lower speeds but transmit greater torque than needle-bearing joints.

A set of gears transmit rotary motion at angles up to 136°—the widest angle of all our U-joints. They are for hand-powered, low-speed applications.

These joints are made of steel.

These joints are made of steel.

Keep shafts moving in sync with these U-joints—a flexible spring at the center stabilizes input and output speed and reduces vibration.

These U-joints are made of steel or plastic.

These U-joints handle at least 11,000 in.-lbs. of torque.

Made of stainless steel, these U-joints offer excellent corrosion resistance.

These steel U-joints meet MIL-U-20625A Class A and have hardened yoke ears for added strength and durability.

Thread these eyelet end fittings onto gas springs.

Suitable for use near sensitive electronic applications, these eyelet end fittings are aluminum, which is nonmagnetic.

Made from stainless steel for excellent corrosion resistance in damp environments.

A spring-loaded socket locks your gas spring to the ball stud—squeeze the ends together to attach and to release.

Suitable for use near sensitive electronic applications, these ball stud mounting brackets are aluminum, which is nonmagnetic.

Made from stainless steel for excellent corrosion resistance in damp environments.

Made from stainless steel for excellent corrosion resistance in damp environments.

Suitable for use near sensitive electronic applications, these ball stud mounting brackets are aluminum, which is nonmagnetic.

Pair these 90° angle brackets with ball socket end fittings to mount your gas spring in almost any position.

Attach ball socket end fittings to these studs to mount gas springs.

Made from stainless steel for excellent corrosion resistance in damp environments.

Made from stainless steel for excellent corrosion resistance in damp environments.