Quickly and safely mount these relays on 35 mm DIN rail (also known as DIN 3). IP20 rated, they have recessed terminals that prevent fingers and other objects from touching live circuits.

Unlike mechanical relays, these solid state relays have no moving parts, so they require less maintenance and last longer, switch faster, and are quieter. They mount on 35 mm DIN rail (also known as DIN 3) for fast installation.

Fit these relays where standard spade-terminal relays are too big.

Using a low-current signal, these relays are often used to control small motors and heaters.

The circular pin terminals plug into relay sockets for easy installation.

With no moving parts, these solid-state relays are fast switching and require less maintenance, last longer, and are quieter than mechanical switches.

Smaller than relays with electrical wiring, these relays fit in compact devices. Mount them through holes on circuit boards with their solder pin terminals.

Receive signals from safety monitoring relays or controllers to switch devices off and on because of a system failure.

Reduce connection errors on circuit boards that control machine guards and other safety devices. These relays take up less space on a board than those with electrical wiring because their solder pin terminals mount directly through circuit board holes.

These relays pair the transmission reliability of an interface relay with the fail-safe operation of a safety relay. They have interlocking contacts—also known as force-guided or mechanically linked contacts—so opposing contacts won't close at the same time.

Send a signal to turn equipment on and off from up to 150 feet away without having to run electrical wire. These relays have an enclosure to protect the terminals from dust and accidental bumps.

A NEMA 4X enclosure protects these relays from washdowns, dirt, and corrosion.

Safeguard your equipment against overheating, wear, and malfunction from a spike or dip in voltage.

Monitor phase, voltage, and frequency at the same time to protect motors, generators, and other three-phase circuits from burning out or overheating.

Detect and mitigate ground faults to prevent harm to equipment, circuits, and people.

These relays switch through a series of different circuit configurations every time they receive an input voltage. Also known as step relays.

Sealed for safety, these relays are a good choice for hazardous locations where combustible or corrosive gases may be present.

Switch lighting systems on and off—these relays can handle the high switching current on large overhead light systems.

Split run time between two devices—these relays automatically alternate between them.

Suitable for DC-powered equipment such as forklifts, floor scrubbers, and trucks.

These relays handle the high starting (inrush) currents that often occur when turning on a vehicle.

Control multiple timing functions from your electrical cabinet—these timer relays mount to 35 mm DIN rail (also known as DIN 3 rail), which is the most commonly used size.

Mount these timer relays in a panel cutout or plug them into a relay socket for quick installation. Capable of fast switching, they are solid state and have no moving parts, so they require less maintenance, last longer, and are quieter than mechanical relays.

Mount these timer relays directly to 35 mm DIN rail (also known as DIN 3 rail) for fast installation. Unlike mechanical relays, they have no moving parts, so they require less maintenance and last longer, are quieter, and switch faster.

Reduce voltage fluctuations and stress on shafts and bearings when starting up three-phase motors. These timer relays start with motor contacts in a star configuration, then switch to a delta configuration after a set delay.

For fast installation, mount these relays directly to 35 mm DIN rail (also known as DIN 3 rail). With no moving parts, these solid state relays last longer and require less maintenance, are quieter, and switch faster than mechanical relays.

Control two steps of an electrical process from a single relay—with two fully independent channels and 30 different functions, these relays give you a wide range of possibilities.

Smaller than other PLCs, these controllers save space in your control cabinet. They combine the functionality of a relay, timer relay, and switch in one unit, so you can program simple automation jobs.

Use the mounting holes to attach monitors to a flat surface.

Plug monitors into relay sockets for fast installation and replacement.