Quick-Install Hook-Style Lacing
The hooks on this lacing are staggered for a strong, yet low-profile connection. Also known as clipper lacing, use a lacer to quickly clinch hooks into belts.
Note: Two laces are required for each joint.
Stainless steel lacing is more corrosion resistant than steel lacing.
Standard cardboard sheet lacing is for use on flat and troughed conveyors.
For technical drawings and 3-D models, click on a part number.
Hook | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Belt Wd. | For Belt Thick. | Lace Number | Style | Wire Dia. | For Min. Pulley Dia. | Connecting Pins Included | Pin Material | Magnetic Properties | Pkg. Qty. | Pkg. | |
Standard Cardboard Sheet Lacing | |||||||||||
Galvanized Steel | |||||||||||
| 12" | 0.343"-0.390" | 7 | Standard Point | 0.054" | 7" | Yes | Nylon-Coated Steel | Magnetic | 12 | 0000000 | 000000 |
430 Stainless Steel  | |||||||||||
| 12" | 0.343"-0.390" | 7 | Standard Point | 0.054" | 7" | Yes | Nylon-Coated 18-8 Stainless Steel | Magnetic | 12 | 0000000 | 000000 |
Connecting Pins for Quick-Install Hook-Style Lacing
Insert a pin into the lacing and lock it in place by bending the ends at a 90° angle.
Note: Connecting pins work with all leg and point styles for a given lace number.
For technical drawings and 3-D models, click on a part number.
Lacers for Quick-Install Hook-Style Lacing
Lacers quickly clinch lengths of lacing in a single operation. To lace belts wider than the working width, repeat the lacing operation.
Style A lacers mount in a vise. Styles B and C lacers are wider for more efficient installation.
Holding strips (sold separately) are required for Styles B and C to load the lacing.
Note: Lacers work with lacing in all leg and point styles for a given lace number.
Lacers | |||||||||
|---|---|---|---|---|---|---|---|---|---|
O'all | Holding Strips | ||||||||
| Style | For Lace No. | Working Wd. | Ht. | Wd. | Dp. | Each | Each | ||
| A | 2, 2SP, 3, 4, 4 1/2, 5, 6, 7, U3-1, U3-2, U3, U4, U5 | 4" | 2" | 5" | 3 1/2" | 000000 | 0000000 | 000000 | 00 |
| A | 2, 2SP, 3, 4, 4 1/2, 5, 6, 7, U3-1, U3-2, U3, U4, U5 | 7" | 2" | 7 5/8" | 3 1/2" | 000000 | 000000 | 000000 | 00 |
| A | 2, 2SP, 3, 4, 5, 6, 7, U3-1, U3-2, U3, U4, U5 | 10" | 2" | 3 3/8" | 3 1/2" | 00000000 | 000000 | 000000 | 00 |
| B | 36, 36SP, 36LL, 36LLSP, 1, 1SP, 1LL, 1XSP, 2, 2SP, 3, 4, 4 1/2, 5, 6, 7, UCM36, UCM36SP, UCM36LL, UCM36LLSP, UX1, UX1SP, U3-1, U3-2, U3, U4, U5 | 14" | 15" | 20" | 10" | 00000000 | 00000000 | 0000000 | 0000000 |
| C | 36, 36SP, 36LL, 36LLSP, 1, 1SP, 1LL, 1XSP, 2, 2SP, 3, 4, 4 1/2, 5, 6, 7, UCM36, UCM36SP, UCM36LL, UCM36LLSP, UX1, UX1SP, U3-1, U3-2, U3, U4, U5 | 24" | 15" | 30" | 10" | 0000000 | 00000000 | 000000 | 000000 |
| C | 36, 36SP, 36LL, 36LLSP, 1, 1SP, 1LL, 1XSP, 2, 2SP, 3, 4, 4 1/2, 5, 6, 7, UCM36, UCM36SP, UCM36LL, UCM36LLSP, UX1, UX1SP, U3-1, U3-2, U3, U4, U5 | 36" | 15" | 42" | 10" | 0000000 | 00000000 | 000000 | 000000 |
| C | 36, 36SP, 36LL, 36LLSP, 1, 1SP, 1LL, 1XSP, 2, 2SP, 3, 4, 4 1/2, 5, 6, 7, UCM36, UCM36SP, UCM36LL, UCM36LLSP, UX1, UX1SP, U3-1, U3-2, U3, U4, U5 | 48" | 15" | 54" | 10" | 0000000 | 00000000 | 000000 | 000000 |
| C | 36, 36SP, 36LL, 36LLSP, 1, 1SP, 1LL, 1XSP, 2, 2SP, 3, 4, 4 1/2, 5, 6, 7, UCM36, UCM36SP, UCM36LL, UCM36LLSP, UX1, UX1SP, U3-1, U3-2, U3, U4, U5 | 60" | 15" | 66" | 10" | 0000000 | 00000000 | 000000 | 000000 |
| C | 36, 36SP, 36LL, 36LLSP, 1, 1SP, 1LL, 1XSP, 2, 2SP, 3, 4, 4 1/2, 5, 6, 7, UCM36, UCM36SP, UCM36LL, UCM36LLSP, UX1, UX1SP, U3-1, U3-2, U3, U4, U5 | 72" | 15" | 76" | 10" | 00000000 | 00000000 | 00000000 | 000000 |
Hammer-On Hook-Style Lacing
This low-profile lacing requires only a hammer to install so it's good for repairs and tight spaces. Also known as alligator lacing, the lacing teeth bite into the belt to hold. The one-piece design runs smoothly over idler rollers without catching on conveyed products. Lacing can be cut to size with wire-cutting pliers.
For technical drawings and 3-D models, click on a part number.
| For Belt Wd. | For Belt Thick. | For Min. Pulley Dia. | Connecting Pins Included | Pin Material | Magnetic Properties | Includes | Pkg. Qty. | Pkg. | |
Galvanized Steel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
No. 7 Lacing | |||||||||
| 6" | 0.090"-0.140" | 2" | Yes | Steel | Magnetic | Installation Gauge Pin with Clips | 6 | 00000000 | 000000 |
| 12" | 0.090"-0.140" | 2" | Yes | Steel | Magnetic | Installation Gauge Pin with Clips | 4 | 00000000 | 00000 |
| 14" | 0.090"-0.140" | 2" | Yes | Steel | Magnetic | Installation Gauge Pin with Clips | 4 | 00000000 | 00000 |
| 16" | 0.090"-0.140" | 2" | Yes | Steel | Magnetic | Installation Gauge Pin with Clips | 4 | 00000000 | 00000 |
| 18" | 0.090"-0.140" | 2" | Yes | Steel | Magnetic | Installation Gauge Pin with Clips | 4 | 00000000 | 00000 |
| 20" | 0.090"-0.140" | 2" | Yes | Steel | Magnetic | Installation Gauge Pin with Clips | 4 | 00000000 | 00000 |
| 24" | 0.090"-0.140" | 2" | Yes | Steel | Magnetic | Installation Gauge Pin with Clips | 4 | 00000000 | 000000 |
| 30" | 0.090"-0.140" | 2" | Yes | Steel | Magnetic | Installation Gauge Pin with Clips | 4 | 00000000 | 000000 |
| 36" | 0.090"-0.140" | 2" | Yes | Steel | Magnetic | Installation Gauge Pin with Clips | 4 | 00000000 | 000000 |
| 48" | 0.090"-0.140" | 2" | Yes | Steel | Magnetic | Installation Gauge Pin with Clips | 4 | 00000000 | 000000 |
| For Belt Wd. | Magnetic Properties | Pkg. Qty. | Pkg. | |
For No. 1A, 7 Lacing | ||||
|---|---|---|---|---|
| 12" | Nonmagnetic | 10 | 00000000 | 000000 |
| 14" | Nonmagnetic | 10 | 00000000 | 00000 |
| 16" | Nonmagnetic | 10 | 00000000 | 00000 |
| 18" | Nonmagnetic | 10 | 00000000 | 00000 |
| 20" | Nonmagnetic | 10 | 00000000 | 00000 |
| 24" | Nonmagnetic | 10 | 00000000 | 00000 |
| 30" | Nonmagnetic | 10 | 00000000 | 00000 |
| 36" | Nonmagnetic | 10 | 00000000 | 00000 |
| 48" | Nonmagnetic | 10 | 00000000 | 00000 |
| For Lace Number | Pkg. Qty. | Pkg. | |
| 7, 1A | 6 | 00000000 | 00000 |
Connecting Pins for Hammer-On Hook-Style Lacing
For technical drawings and 3-D models, click on a part number.
| For Belt Wd. | Magnetic Properties | Pkg. Qty. | Pkg. | |
Galvanized Steel | ||||
|---|---|---|---|---|
For No. 1A, 7 Lacing | ||||
| 12" | Nonmagnetic | 10 | 00000000 | 000000 |
| 14" | Nonmagnetic | 10 | 00000000 | 00000 |
| 16" | Nonmagnetic | 10 | 00000000 | 00000 |
| 18" | Nonmagnetic | 10 | 00000000 | 00000 |
| 20" | Nonmagnetic | 10 | 00000000 | 00000 |
| 24" | Nonmagnetic | 10 | 00000000 | 00000 |
| 30" | Nonmagnetic | 10 | 00000000 | 00000 |
| 36" | Nonmagnetic | 10 | 00000000 | 00000 |
| 48" | Nonmagnetic | 10 | 00000000 | 00000 |
Installation Clips for Hammer-On Hook-Style Lacing
For technical drawings and 3-D models, click on a part number.
| For Lace Number | Pkg. Qty. | Pkg. | |
| 7, 1A | 6 | 00000000 | 00000 |
Alligator Lacing Sets for Flat Belts
Often used to join conveyor belt seams, use this lacing for a tight hold with uniform tension across the width of your belt. Once installed, joints are flush with the belt surface on both sides, so teeth run smoothly over idlers and don’t catch on conveyed materials. Use the included removable hinge pins to connect the lacing between two belt ends.
For technical drawings and 3-D models, click on a part number.
| For Belt Thick. | For Max. Belt Wd. | Lg. | Lace Number | Number of Belt Joints Per Set | Each | |
Steel | ||||||
|---|---|---|---|---|---|---|
| 3/32"-9/64" | 12" | 6" | 7 | 6 | 0000000 | 000000 |