Filter by
DFARS Compliance
Handle Thread Size
Mounting Rods for Conveyors
A
Use brackets and connectors to create vertical and horizontal support arms.
Round rods are the most common. However, these rods might cause connectors to slip over time as vibration loosens their hold on the rod.
Hollow rods are lighter than solid rods and easier to move. They’re the best choice for frequent conveyor setup changes.
Stainless steel mounting rods are the most corrosion resistant.
For technical drawings and 3-D models, click on a part number.
Mounting Rods with Bracket Base for Conveyors
B
These rods have a bracket on the base so they're ready to mount. Solid rods are sturdier than hollow rods, so they’re less likely to be knocked out of place by heavy objects on your conveyor. Style B rods stick out horizontally from the bracket.
For technical drawings and 3-D models, click on a part number.
Bracket | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Rod Dia. | Wd. | Material | Bracket Material | Mounting Fasteners Included | Mounting Hole Dia. | Each | ||
Solid | |||||||||
| B | 2" | 15mm | 1 3/4" | Steel | Steel | No | 6mm | 0000000 | 000000 |
Graduated Mounting Rods for Conveyors
Graduated in 1/8" or 1 mm increments, these rods make it easy to align multiple brackets during installation.
Round rods are the most common. However, these rods might cause connectors to slip over time as vibration loosens their hold on the rod. Hollow rods are best for frequent conveyor setup changes because they are lighter than solid rods and easier to move.
For technical drawings and 3-D models, click on a part number.
Graduated Modular Conveyor Sensor Mounts
Precisely adjust your sensor to the exact spot you need it on your conveyor—these mounts have graduations every 1 mm. They come assembled but can be easily adapted by swapping, adding, or adjusting parts. These mounts work with both round and square mounting rods and can be installed horizontally and vertically. All include two adjustable handles, also called clamping handles, so it’s easy to frequently change the mount’s position and tighten the rods without tools. Lift the handle to rotate it into an ergonomic position or move it out of the way. Release the handle to tighten or loosen components.
To modify these mounts, add mounting rods, mounting rods with a bracket base, mounting rod end caps, mounting rod connectors, sensor and reflector brackets, and adjustable handles. Use the included hex key to fasten or remove parts.
Mounts with an adjustable connector can be pivoted to position the rod at any angle.
Mounts with a blank sensor hole let you drill your own hole based on your application.
To install these mounts to a magnetic surface, attach a magnetic base (sold separately).
For technical drawings and 3-D models, click on a part number.
Sensor Mounts
Fixed Connectors—Unthreaded Sensor Hole
Fixed Connectors—Blank Sensor Hole
Adjustable Connectors—Unthreaded Sensor Hole
Adjustable Connectors—Blank Sensor Hole
Rod Lg. | Max. | Handle Thread | Mounting | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| (A) | (B) | For Sensor/Switch OD, mm | Rod Dia., mm | For Rod Wd., mm | Ht. | Wd. | Dp. | Graduation Marks (Numeric Increments) | Size | Gender | Fasteners Included | No. of Holes | Hole Dia., mm | Rod Material | Includes | Each | |
Fixed Connectors—Unthreaded Sensor Hole | |||||||||||||||||
| 4" | 4" | 8 | 15 | 12 | 5 1/2" | 5 1/2" | 5 1/2" | Millimeters (10 mm) | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 0000000 |
| 4" | 4" | 12 | 15 | 12 | 6" | 5 1/2" | 5 1/2" | Millimeters (10 mm) | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 4" | 8" | 8 | 15 | 12 | 9 1/2" | 5 1/2" | 5 1/2" | Millimeters (10 mm) | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 4" | 8" | 12 | 15 | 12 | 10" | 5 1/2" | 5 1/2" | Millimeters (10 mm) | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 4" | 12" | 8 | 15 | 12 | 13 1/2" | 5 1/2" | 5 1/2" | Millimeters (10 mm) | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 4" | 12" | 12 | 15 | 12 | 13 1/2" | 5 1/2" | 5 1/2" | Millimeters (10 mm) | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 8" | 8" | 8 | 15 | 12 | 9 1/2" | 9 1/2" | 5 1/2" | Millimeters (10 mm) | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 8" | 8" | 12 | 15 | 12 | 10" | 9 1/2" | 5 1/2" | Millimeters (10 mm) | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
Fixed Connectors—Blank Sensor Hole | |||||||||||||||||
| 4" | 4" | __ | 15 | 12 | 6" | 5 1/2" | 5 1/2" | Millimeters (10 mm) | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Blank Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 4" | 8" | __ | 15 | 12 | 10" | 5 1/2" | 5 1/2" | Millimeters (10 mm) | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Blank Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 4" | 12" | __ | 15 | 12 | 14" | 5 1/2" | 5 1/2" | Millimeters (10 mm) | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Blank Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 8" | 8" | __ | 15 | 12 | 10" | 9 1/2" | 5 1/2" | Millimeters (10 mm) | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Blank Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
Adjustable Connectors—Unthreaded Sensor Hole | |||||||||||||||||
| 4" | 4" | 8 | 15 | 12 | 5 1/2" | 5 1/2" | 6 1/2" | Millimeters (10 mm) | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 4" | 4" | 12 | 15 | 12 | 6" | 5 1/2" | 6 1/2" | Millimeters (10 mm) | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 4" | 8" | 8 | 15 | 12 | 9 1/2" | 5 1/2" | 6 1/2" | Millimeters (10 mm) | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 4" | 8" | 12 | 15 | 12 | 9 1/2" | 5 1/2" | 6 1/2" | Millimeters (10 mm) | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 4" | 12" | 8 | 15 | 12 | 13 1/2" | 5 1/2" | 6 1/2" | Millimeters (10 mm) | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 4" | 12" | 12 | 15 | 12 | 13 1/2" | 5 1/2" | 6 1/2" | Millimeters (10 mm) | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 8" | 8" | 8 | 15 | 12 | 9 1/2" | 9 1/2" | 6 1/2" | Millimeters (10 mm) | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 8" | 8" | 12 | 15 | 12 | 9 1/2" | 9 1/2" | 6 1/2" | Millimeters (10 mm) | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
Adjustable Connectors—Blank Sensor Hole | |||||||||||||||||
| 4" | 4" | __ | 15 | 12 | 6" | 5 1/2" | 6 1/2" | Millimeters (10 mm) | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Blank Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 4" | 8" | __ | 15 | 12 | 10" | 5 1/2" | 6 1/2" | Millimeters (10 mm) | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Blank Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 4" | 12" | __ | 15 | 12 | 14" | 5 1/2" | 6 1/2" | Millimeters (10 mm) | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Blank Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 8" | 8" | __ | 15 | 12 | 10" | 9 1/2" | 6 1/2" | Millimeters (10 mm) | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Blank Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
Magnetic Bases
Mounting Hole | |||||||
|---|---|---|---|---|---|---|---|
| Dia. | Magnetic Pull, lbs. | Mounting Fasteners Included | Size | Pitch, mm | Cover Material | Each | |
| 2 1/4" | 22.5 | No | M6 | 1 | Rubber | 0000000 | 000000 |
Blank Screw-On Sensor Mounting Brackets
10
Lg., mm | Mounting | |||||||
|---|---|---|---|---|---|---|---|---|
| (A) | (B) | (C) | Thick., mm | Fasteners Included | No. of Slots | For Screw Size | Each | |
303 Stainless Steel | ||||||||
| 30 | 35 | 42 | 2.5 | No | 2 | M4 | 000000000 | 000000 |
Modular Conveyor Sensor Mounts
Position your sensor exactly where you need it for your conveyor setup. These mounts come assembled but can be easily adapted by swapping, adding, or adjusting parts. They work with both round and square mounting rods and can be installed horizontally and vertically. All include two adjustable handles, also called clamping handles, so it’s easy to frequently change the mount’s position and tighten the rods without tools. Lift the handle to rotate it into an ergonomic position or move it out of the way. Release the handle to tighten or loosen components.
To modify these mounts, add mounting rods, mounting rods with a bracket base, mounting rod end caps, mounting rod connectors, sensor and reflector brackets, and adjustable handles. Use the included hex key to fasten or remove parts.
Mounts with an adjustable connector can be pivoted to position the rod at any angle.
Mounts with a blank sensor hole let you drill your own hole based on your application.
To install these mounts to a magnetic surface, attach a magnetic base (sold separately).
For technical drawings and 3-D models, click on a part number.
Sensor Mounts
Fixed Connectors—Unthreaded Sensor Hole
Fixed Connectors—Blank Sensor Hole
Adjustable Connectors—Unthreaded Sensor Hole
Adjustable Connectors—Blank Sensor Hole
Rod Lg. | Max. | Handle Thread | Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| (A) | (B) | For Sensor/Switch OD, mm | Rod Dia., mm | For Rod Wd., mm | Ht. | Wd. | Dp. | Size | Gender | Fasteners Included | No. of Holes | Hole Dia., mm | Rod Material | Includes | Each | |
Fixed Connectors—Unthreaded Sensor Hole | ||||||||||||||||
| 4" | 4" | 8 | 15 | 12 | 5 1/2" | 5 1/2" | 5 1/2" | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 0000000 |
| 4" | 4" | 12 | 15 | 12 | 6" | 5 1/2" | 5 1/2" | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 4" | 8" | 8 | 15 | 12 | 9 1/2" | 5 1/2" | 5 1/2" | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 4" | 8" | 12 | 15 | 12 | 10" | 5 1/2" | 5 1/2" | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 4" | 12" | 8 | 15 | 12 | 13 1/2" | 5 1/2" | 5 1/2" | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 4" | 12" | 12 | 15 | 12 | 13 1/2" | 5 1/2" | 5 1/2" | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 8" | 8" | 8 | 15 | 12 | 9 1/2" | 9 1/2" | 5 1/2" | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 8" | 8" | 12 | 15 | 12 | 10" | 9 1/2" | 5 1/2" | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
Fixed Connectors—Blank Sensor Hole | ||||||||||||||||
| 4" | 4" | __ | 15 | 12 | 6" | 5 1/2" | 5 1/2" | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Blank Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 4" | 8" | __ | 15 | 12 | 10" | 5 1/2" | 5 1/2" | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Blank Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 4" | 12" | __ | 15 | 12 | 14" | 5 1/2" | 5 1/2" | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Blank Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 8" | 8" | __ | 15 | 12 | 10" | 9 1/2" | 5 1/2" | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Blank Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
Adjustable Connectors—Unthreaded Sensor Hole | ||||||||||||||||
| 4" | 4" | 8 | 15 | 12 | 7" | 5 1/2" | 6 1/2" | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 4" | 4" | 12 | 15 | 12 | 7" | 5 1/2" | 6 1/2" | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 4" | 8" | 8 | 15 | 12 | 11" | 5 1/2" | 6 1/2" | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 4" | 8" | 12 | 15 | 12 | 11" | 5 1/2" | 6 1/2" | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 4" | 12" | 8 | 15 | 12 | 15" | 5 1/2" | 6 1/2" | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 4" | 12" | 12 | 15 | 12 | 15" | 5 1/2" | 6 1/2" | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 8" | 8" | 8 | 15 | 12 | 15" | 9 1/2" | 6 1/2" | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 8" | 8" | 12 | 15 | 12 | 15" | 9 1/2" | 6 1/2" | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Unthreaded Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
Adjustable Connectors—Blank Sensor Hole | ||||||||||||||||
| 4" | 4" | __ | 15 | 12 | 7" | 5 1/2" | 6 1/2" | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Blank Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 4" | 8" | __ | 15 | 12 | 11" | 5 1/2" | 6 1/2" | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Blank Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 4" | 12" | __ | 15 | 12 | 15" | 5 1/2" | 6 1/2" | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Blank Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
| 8" | 8" | __ | 15 | 12 | 15" | 9 1/2" | 6 1/2" | M6 | Male | No | 2 | 6 | Stainless Steel | Two Mounting Rods, Mounting Rod Connector, Mounting Rod Bracket, Three End Caps, Sensor and Reflector Bracket, Blank Screw-On Sensor Mounting Bracket, Two Adjustable Handles | 0000000 | 000000 |
Magnetic Bases
Mounting Hole | |||||||
|---|---|---|---|---|---|---|---|
| Dia. | Magnetic Pull, lbs. | Mounting Fasteners Included | Size | Pitch, mm | Cover Material | Each | |
| 2 1/4" | 22.5 | No | M6 | 1 | Rubber | 0000000 | 000000 |
Blank Screw-On Sensor Mounting Brackets
10
Lg., mm | Mounting | |||||||
|---|---|---|---|---|---|---|---|---|
| (A) | (B) | (C) | Thick., mm | Fasteners Included | No. of Slots | For Screw Size | Each | |
303 Stainless Steel | ||||||||
| 30 | 35 | 42 | 2.5 | No | 2 | M4 | 000000000 | 000000 |