Mounting Rods for Conveyors
Use brackets and connectors to create vertical and horizontal support arms.
Round rods are the most common. However, these rods might cause connectors to slip over time as vibration loosens their hold on the rod.
Hollow rods are lighter than solid rods and easier to move. They’re the best choice for frequent conveyor setup changes. Solid rods are sturdier than hollow rods, so they’re less likely to be knocked out of place by heavy objects on your conveyor.
Stainless steel mounting rods are the most corrosion resistant.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Rod Dia. | Size | Lg. | Gender | Material | Includes | Each | ||
Hollow | |||||||||
| A | 18" | 1/2" | 5/16"-18 | 3/4" | Female | Stainless Steel | Black Plastic End Cap | 00000000 | 000000 |
Solid | |||||||||
| A | 3" | 1/2" | 5/16"-18 | 3/4" | Female | Stainless Steel | __ | 0000000 | 00000 |
| A | 4" | 5/8" | 5/16"-18 | 1" | Female | Stainless Steel | __ | 00000000 | 00000 |
| A | 5" | 1/2" | 5/16"-18 | 3/4" | Female | Stainless Steel | __ | 0000000 | 00000 |
| A | 6" | 5/8" | 5/16"-18 | 1" | Female | Stainless Steel | __ | 00000000 | 00000 |
| A | 8" | 1/2" | 5/16"-18 | 3/4" | Female | Stainless Steel | __ | 0000000 | 00000 |
| A | 8" | 5/8" | 5/16"-18 | 1" | Female | Stainless Steel | __ | 00000000 | 00000 |
| A | 10" | 1/2" | 5/16"-18 | 3/4" | Female | Stainless Steel | __ | 0000000 | 00000 |
| A | 10" | 5/8" | 5/16"-18 | 1" | Female | Stainless Steel | __ | 00000000 | 00000 |
| A | 12" | 1/2" | 5/16"-18 | 5/8" | Female | Stainless Steel | __ | 00000000 | 00000 |
| A | 12" | 5/8" | 5/16"-18 | 1" | Female | Stainless Steel | __ | 00000000 | 00000 |
| A | 15" | 1/2" | 5/16"-18 | 0.89" | Female | Stainless Steel | __ | 00000000 | 00000 |
| A | 16" | 5/8" | 5/16"-18 | 1" | Female | Stainless Steel | __ | 00000000 | 00000 |
| A | 24" | 1/2" | 5/16"-18 | 0.89" | Female | Stainless Steel | __ | 00000000 | 00000 |
Graduated Mounting Rods for Conveyors
Graduated in 1/8" or 1 mm increments, these rods make it easy to align multiple brackets during installation.
Round rods are the most common. However, these rods might cause connectors to slip over time as vibration loosens their hold on the rod. Solid rods are sturdier than hollow rods, so they are less likely to be knocked out of place by heavy objects on your conveyor.
For technical drawings and 3-D models, click on a part number.
Thread | 1/2" Rod Dia. | ||||||
|---|---|---|---|---|---|---|---|
| Lg. | Graduation Marks (Numeric Increments) | Size | Lg. | Gender | Material | Each | |
Solid | |||||||
| 3" | 8ths (1") | 5/16"-18 | 0.89" | Female | Stainless Steel | 00000000 | 000000 |
| 5" | 8ths (1") | 5/16"-18 | 0.89" | Female | Stainless Steel | 00000000 | 00000 |
| 8" | 8ths (1") | 5/16"-18 | 0.89" | Female | Stainless Steel | 00000000 | 00000 |
| 10" | 8ths (1") | 5/16"-18 | 0.89" | Female | Stainless Steel | 00000000 | 00000 |
| 12" | 8ths (1") | 5/16"-18 | 0.89" | Female | Stainless Steel | 00000000 | 00000 |
| 15" | 8ths (1") | 5/16"-18 | 0.89" | Female | Stainless Steel | 00000000 | 00000 |
| 18" | 8ths (1") | 5/16"-18 | 0.89" | Female | Stainless Steel | 00000000 | 00000 |
| 24" | 8ths (1") | 5/16"-18 | 0.89" | Female | Stainless Steel | 00000000 | 00000 |
Pivoting Mounting Rods for Conveyors
The pivoting joint on these rods makes angle mounting easy.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Rod Dia. | Range of Motion | Size | Lg. | Gender | Threading | Material | Each | |
Solid | |||||||||
| 3" | 1/2" | 180° | 5/16"-18 | 0.56" | Female | Threaded on One End | Stainless Steel | 00000000 | 000000 |
| 4" | 5/8" | 180° | 5/16"-18 | 0.56" | Female | Threaded on One End | Stainless Steel | 00000000 | 00000 |
| 5" | 1/2" | 180° | 5/16"-18 | 0.56" | Female | Threaded on One End | Stainless Steel | 0000000 | 00000 |
| 6" | 5/8" | 180° | 5/16"-18 | 0.56" | Female | Threaded on One End | Stainless Steel | 00000000 | 00000 |
| 7" | 1/2" | 180° | 5/16"-18 | 0.56" | Female | Threaded on One End | Stainless Steel | 0000000 | 00000 |
| 8" | 5/8" | 180° | 5/16"-18 | 0.56" | Female | Threaded on One End | Stainless Steel | 00000000 | 00000 |
| 9" | 1/2" | 180° | 5/16"-18 | 0.56" | Female | Threaded on One End | Stainless Steel | 00000000 | 00000 |
| 10" | 5/8" | 180° | 5/16"-18 | 0.56" | Female | Threaded on One End | Stainless Steel | 00000000 | 00000 |
Graduated Pivoting Mounting Rods for Conveyors
To make aligning multiple brackets during installation easy, these rods have 1/8” graduation marks. They also have a pivoting joint, so you can adjust the angle of your mount.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Rod Dia. | Range of Motion | Size | Lg. | Gender | Threading | Material | Each | |
Solid | |||||||||
| 3" | 1/2" | 180° | 5/16"-18 | 0.72" | Female | Threaded on One End | Stainless Steel | 0000000 | 000000 |
| 4" | 5/8" | 180° | 5/16"-18 | 0.72" | Female | Threaded on One End | Stainless Steel | 0000000 | 00000 |
| 5" | 1/2" | 180° | 5/16"-18 | 0.72" | Female | Threaded on One End | Stainless Steel | 0000000 | 00000 |
| 6" | 5/8" | 180° | 5/16"-18 | 0.72" | Female | Threaded on One End | Stainless Steel | 0000000 | 00000 |
| 7" | 1/2" | 180° | 5/16"-18 | 0.72" | Female | Threaded on One End | Stainless Steel | 0000000 | 00000 |
| 8" | 5/8" | 180° | 5/16"-18 | 0.72" | Female | Threaded on One End | Stainless Steel | 0000000 | 00000 |
| 9" | 1/2" | 180° | 5/16"-18 | 0.72" | Female | Threaded on One End | Stainless Steel | 0000000 | 00000 |
| 10" | 5/8" | 180° | 5/16"-18 | 0.72" | Female | Threaded on One End | Stainless Steel | 0000000 | 00000 |