1.9" Diameter Conveyor Rollers
Replace damaged rollers or use multiple rollers to build a custom conveyor.
For technical drawings and 3-D models, click on a part number.
Roller | |||||||
|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | Overall Wd. | Temp. Range, °F | Each | |
7/16" Hex Axle | |||||||
1.9" Dia. Galvanized Steel Roller | |||||||
| 28" | 27 19/32" | 16 | 265 | 29 1/4" | -20° to 300° | 0000000 | 000000 |
1/4" Round Axle | |||||||
1.9" Dia. Galvanized Steel Roller | |||||||
| 28" | 27 1/2" | 16 | 125 | 29" | -15° to 220° | 00000000 | 00000 |
3/8" Round Axle | |||||||
1.9" Dia. Galvanized Steel Roller | |||||||
| 28" | 27 7/8" | 16 | 50 | 29" | 0° to 150° | 00000000 | 00000 |
1/2" Round Axle | |||||||
1.9" Dia. Galvanized Steel Roller | |||||||
| 28" | 27 19/32" | 16 | 265 | 29 1/4" | -20° to 140° | 00000000 | 00000 |
Large-Diameter Conveyor Rollers
Steel rollers are stronger than aluminum rollers.
Aluminum rollers are lightweight and corrosion resistant.
Sealed bearings keep out dirt and moisture for longer life.
For technical drawings and 3-D models, click on a part number.
Roller | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | Overall Wd. | Bearing Seal Type | Temp. Range, °F | Each | |
7/16" Hex Axle | ||||||||
2" Dia. Steel Roller | ||||||||
| 28" | 27 9/16" | 12 | 300 | 29 1/8" | __ | -15° to 220° | 0000000 | 000000 |
2 1/2" Dia. Steel Roller | ||||||||
| 28" | 27 3/8" | 14 | 280 | 29 1/8" | __ | -15° to 220° | 0000000 | 00000 |
11/16" Hex Axle | ||||||||
2" Dia. Steel Roller | ||||||||
| 28" | 27 5/8" | 11 | 700 | 30" | Shielded | -10° to 225° | 0000000 | 000000 |
2 1/2" Dia. Steel Roller | ||||||||
| 28" | 27" | 11 | 750 | 29 1/4" | __ | 0° to 150° | 00000000 | 00000 |
3" Dia. Steel Roller | ||||||||
| 28" | 26 15/16" | 11 | 840 | 30" | Sealed | -4° to 220° | 0000000 | 000000 |
1 1/16" Hex Axle | ||||||||
3 1/2" Dia. Steel Roller | ||||||||
| 28" | 27 3/8" | 5 | 1,100 | 29 1/2" | __ | -10° to 220° | 00000000 | 000000 |
1/4" Round Axle | ||||||||
2" Dia. Steel Roller | ||||||||
| 28" | 27 1/2" | 12 | 190 | 29" | __ | -15° to 220° | 00000000 | 00000 |
2" Dia. Aluminum Roller | ||||||||
| 28" | 27 1/2" | 16 | 65 | 29" | __ | -15° to 220° | 00000000 | 00000 |
1 3/16" Round Axle | ||||||||
4" Dia. Steel Roller | ||||||||
| 28" | 27 1/16" | 9 | 6,045 | 29 9/16" | Sealed | -10° to 225° | 0000000 | 000000 |
Small-Diameter Conveyor Rollers
Galvanized steel rollers are strong and have some corrosion resistance. Aluminum rollers are lightweight and more corrosion resistant than galvanized steel.
For technical drawings and 3-D models, click on a part number.
Roller | |||||||
|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | Overall Wd. | Temp. Range, °F | Each | |
1/4" Round Axle | |||||||
3/4" Dia. Galvanized Steel Roller | |||||||
| 28" | 27 3/4" | 20 | 30 | 28 3/4" | -15° to 220° | 0000000 | 000000 |
3/4" Dia. Aluminum Roller | |||||||
| 28" | 27 3/4" | 20 | 20 | 28 3/4" | -15° to 220° | 0000000 | 00000 |
7/8" Dia. Steel Roller | |||||||
| 28" | 27 3/4" | 13 | 45 | 28 3/4" | -15° to 220° | 0000000 | 00000 |
1 3/8" Dia. Galvanized Steel Roller | |||||||
| 28" | 27 1/2" | 18 | 50 | 29" | -15° to 220° | 0000000 | 00000 |
1 3/8" Dia. Aluminum Roller | |||||||
| 28" | 27 1/2" | 18 | 40 | 29" | -15° to 220° | 00000000 | 00000 |
Small-Diameter Corrosion-Resistant Conveyor Rollers
Made from stainless steel, these rollers are suitable for washdown applications.
Conveyor Rollers | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Roller | Replacement Bearings | |||||||||
| For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | Overall Wd. | Bearing Material | Temp. Range, °F | Each | Each | ||
7/16" Hex Axle | ||||||||||
1 5/8" Dia. Stainless Steel Roller | ||||||||||
| 28" | 27 3/8" | 16 | 100 | 29 1/8" | Plastic | 30° to 150° | 0000000 | 000000 | 0000000 | 000000 |
1/4" Round Axle | ||||||||||
3/4" Dia. Stainless Steel Roller | ||||||||||
| 28" | 27 1/8" | 20 | 20 | 29" | Plastic | 30° to 150° | 0000000 | 00000 | 0000000 | 0000 |
1 3/8" Dia. Stainless Steel Roller | ||||||||||
| 28" | 27 3/8" | 16 | 180 | 29" | Plastic | -30° to 165° | 00000000 | 000000 | 000000 | 00 |
1.9" Diameter Corrosion-Resistant Conveyor Rollers
Made from stainless steel, these rollers are suitable for washdown applications.
Sealed bearings keep out dirt and moisture for longer life.
For technical drawings and 3-D models, click on a part number.
Roller | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | Overall Wd. | Bearing Seal Type | Temp. Range, °F | Each | |
7/16" Hex Axle | ||||||||
1.9" Dia. Stainless Steel Roller | ||||||||
| 28" | 27 3/8" | 16 | 115 | 29" | Sealed | 10° to 150° | 0000000 | 0000000 |
1.9" Diameter Abrasion-Resistant Conveyor Rollers
The nonmarring roller surface protects material better than all-metal rollers.
PVC rollers are for light duty applications.
For technical drawings and 3-D models, click on a part number.
Roller | |||||||
|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | Wd. | Thick. | Cap., lbs. | Overall Wd. | Temp. Range, °F | Each | |
7/16" Hex Axle | |||||||
1.9" Dia. PVC Plastic Rollers—Gray | |||||||
| 28" | 27 3/8" | 1/8" | 100 | 29 1/8" | 30° to 150° | 00000000 | 000000 |
1.9" Diameter Dent-Resistant Conveyor Rollers
Rollers are made from thick, 12-ga. steel so they're less likely to dent than standard 16-ga. rollers.
For technical drawings and 3-D models, click on a part number.
Roller | |||||||
|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | Overall Wd. | Temp. Range, °F | Each | |
7/16" Hex Axle | |||||||
1.9" Dia. Steel Roller | |||||||
| 28" | 27 7/8" | 12 | 210 | 29" | -20° to 250° | 0000000 | 000000 |
1.9" Diameter Quiet-Rolling Conveyor Rollers
Rollers have maintenance-free, precision bearings to reduce conveyor noise.
For technical drawings and 3-D models, click on a part number.
Roller | |||||||
|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | Overall Wd. | Temp. Range, °F | Each | |
7/16" Hex Axle | |||||||
1.9" Dia. Galvanized Steel Roller | |||||||
| 28" | 27 3/32" | 16 | 130 | 29 1/4" | -20° to 165° | 0000000 | 000000 |
One-Way Conveyor Rollers for Inclines
Rollers move in one direction so they won't roll back when idle, keeping packages in place. Sealed bearings keep out dirt and moisture.
For technical drawings and 3-D models, click on a part number.
Roller | |||||||
|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | Overall Wd. | Temp. Range, °F | Each | |
7/16" Hex Axle | |||||||
1.9" Dia. Galvanized Steel | |||||||
| 28" | 27 1/2" | 16 | 135 | 29" | 10° to 150° | 0000000 | 0000000 |
Round-Groove Conveyor Rollers
Rollers are grooved to accommodate round belts on line-shaft conveyors.
Rollers with two grooves can be used with motorized roller conveyors.
For technical drawings and 3-D models, click on a part number.
Roller | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | For Belt Dia. | Wd. | Gauge | Cap., lbs. | Bearing-to-Groove Wd. | Groove Ctr.-to-Ctr. Wd. | O'all Wd. | Temp. Range, °F | Each | |
7/16" Hex Axle—1.9" Dia. Galvanized Steel Roller | ||||||||||
1 Groove | ||||||||||
| 28" | 3/16" | 27 19/32" | 16 | 265 | 2.75" | __ | 29 1/4" | -20° to 350° | 0000000 | 000000 |
2 Groove | ||||||||||
| 28" | 3/16" | 27 7/8" | 16 | 225 | 2.50" | 1.3" | 29" | -40° to 212° | 0000000 | 00000 |
Tapered Round-Groove Conveyor Rollers
Rollers taper from approximately 2 1/2" diameter on the outside to 1 5/8" on the inside so packages maintain their orientation on line-shaft conveyors.
For technical drawings and 3-D models, click on a part number.
Roller | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | For Belt Dia. | Wd. | Gauge | Cap., lbs. | Bearing-to-Groove Wd. | Groove Ctr.-to-Ctr. Wd. | O'all Wd. | Temp. Range, °F | Each | |
7/16" Hex Axle | ||||||||||
1 5/8"-2 1/2" Dia. Galvanized Steel Roller | ||||||||||
| 28" | 3/16" | 27 5/16" | 14 | 250 | 2.80" | 1" | 29" | -25° to 250° | 0000000 | 0000000 |
Sprocketed Conveyor Rollers
Replace rollers on a chain-driven conveyor.
For technical drawings and 3-D models, click on a part number.
Roller | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | For ANSI Chain No. | Wd. | Gauge | Cap., lbs. | No. of Sprockets | No. of Teeth per Sprocket | Bearing-to-Sprocket Wd. | Sprocket Ctr.-to-Ctr. Wd. | O'all Wd. | Temp. Range, °F | Each | |
7/16" Hex Axle | ||||||||||||
1.9" Dia. Steel Roller | ||||||||||||
| 28" | 40 | 27 7/16" | 9 | 290 | 2 | 18 | 1 1/8" | 1 1/8" | 29 1/4" | -40° to 300° | 00000000 | 0000000 |
| 28" | 50 | 27 7/16" | 9 | 290 | 2 | 15 | 1 1/8" | 1 1/8" | 29 1/4" | -40° to 300° | 00000000 | 000000 |
Roller Conveyors
Mix and match conveyors and stands to design a conveyor system that moves parts exactly where they need to go. These conveyors have rollers that transfer items with flat or uneven bottoms, such as boxes or shipping tubes. They’re more durable and carry heavier loads than belt and skate wheel conveyors.
These conveyors don’t run on electricity, so their rollers require momentum from gravity, a push, or a powered conveyor to move. Since they’re not wired, they’re quick to set up and easy to maintain. This makes them handy if another conveyor unexpectedly shuts down or you need to extend an existing line in a pinch.
Curved and straight conveyors have connecting hooks to attach conveyor sections together.
Galvanized steel conveyors carry heavier loads than aluminum conveyors.
Stands adjust in height. Stationary stands have adjustable mounting plates, so you can set the conveyor at a decline. These stands bolt to the floor for stability.
Note: Capacities are based on an evenly distributed load. The length of the material you’re conveying should be at least three times the roller spacing.
Wd. | |||||||
|---|---|---|---|---|---|---|---|
| O'all | Between Frame | Lg., ft. | Frame Ht. | Cap. (No. of Stands Required) | No. of Stands Included | Each | |
3" Roller Spacing | |||||||
1.9" Dia. Galvanized Steel Rollers—1/4" Round Axle | |||||||
| 30" | 28" | 5 | 2 1/2" | 200 lbs./ft. (2) | None | 0000000 | 0000000 |
| 30" | 28" | 10 | 2 1/2" | 50 lbs./ft. (2), 200 lbs./ft. (3) | None | 0000000 | 000000 |
4 1/2" Roller Spacing | |||||||
1.9" Dia. Galvanized Steel Rollers—1/4" Round Axle | |||||||
| 30" | 28" | 5 | 2 1/2" | 200 lbs./ft. (2) | None | 0000000 | 000000 |
| 30" | 28" | 10 | 2 1/2" | 50 lbs./ft. (2), 200 lbs./ft. (3) | None | 0000000 | 000000 |
6" Roller Spacing | |||||||
1.9" Dia. Galvanized Steel Rollers—1/4" Round Axle | |||||||
| 30" | 28" | 5 | 2 1/2" | 200 lbs./ft. (2) | None | 0000000 | 000000 |
| 30" | 28" | 10 | 2 1/2" | 50 lbs./ft. (2), 200 lbs./ft. (3) | None | 0000000 | 000000 |
Wd. | |||||||
|---|---|---|---|---|---|---|---|
| O'all | Between Frame | Radius | Frame Ht. | Cap. (No. of Stands Required) | No. of Stands Included | Each | |
1.9" Dia. Galvanized Steel Rollers—1/4" Round Axle | |||||||
| 30" | 28" | 36" | 2 1/2" | 200 lbs./ft. (3) | None | 0000000 | 0000000 |
Floor Mount. Slot | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Material | Color | Conveyor Mount. Fasteners Included | No. of Conveyor Mount. Holes | Conveyor Mount. Hole Dia. | Floor Mount. Fasteners Included | No. of Floor Mount. Holes | Lg. | Wd. | Each | |
For 30" Overall Wd. | |||||||||||
| 14" to 17" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 0000000 | 000000 |
| 17" to 23" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 00000000 | 00000 |
| 24" to 30" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 00000000 | 00000 |
| 31" to 37" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 00000000 | 00000 |
| 38" to 44" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 00000000 | 000000 |
Motorized Roller Conveyors
Also known as line-shaft conveyors, these conveyors are driven by a drive shaft and round belts. Unlike belt conveyors, these have built-in accumulation, so packages can build up without crashing into one another or falling off the conveyor. The rollers are designed to smoothly transfer totes, packages, and other lightweight material. Shipping tubes, drums, and pails are less likely to get stuck in between rollers than between skate wheels.
Mix and match stands and conveyors to form straight lines, curve around obstacles, or create inclines. Only straight conveyor sections contain a motor, but they can power up to 60 ft. of conveyor extensions on either side. The motor can be reversed to send material in either direction.
Fixed-speed conveyors travel at 60 fpm, a common industry rate, to move material. Those with three-phase motors balance power more evenly than single-phase motors, so they can handle heavier loads. While a conveyor with a single-phase motor may lag when a heavy load reaches the conveyor, a conveyor with a three-phase motor will continue smoothly.
Variable-speed conveyors adjust from standard conveyor speeds down to 25 fpm, so they’re often used to slow material flow for quality checks.
90° curved conveyors have tapered rollers that keep packages centered.
Lift gate conveyors can be raised up like a drawbridge, so you can quickly and safely pass through your line. Install them in areas that don’t have room for crossover bridges to skip the long walk around. They’re spring-loaded, so they’re easier to lift than manual gates. Choose a lift gate with a drive shaft mounted to the same side as the conveyor you’re connecting it to. The drive shaft on curved conveyors is always mounted to the inside curve.
Note: Capacities are based on an evenly distributed load. The length of the material you’re conveying should be at least three times the roller spacing.
For technical drawings and 3-D models, click on a part number.
Wd. | Roller | Ht. | No. of Stands | 3 ft. Lg. | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all | Between Frame | Spacing | Projection | Frame | O'all | Power, hp | Speed, fpm | Cap., lbs./ft. | Required | Included | Features | Each | |
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle | |||||||||||||
120V AC—Single Phase (Plug In) | |||||||||||||
| 31" | 28" | 3" | 1/4" | 5 1/2" | 36"-48" | 1/2 | 60 | 40 | 2 | 2 | Connecting Plates, On/Off Switch | 00000000 | 000000000 |
240/460V AC—Three Phase (Hardwire) | |||||||||||||
| 31" | 28" | 3" | 1/4" | 5 1/2" | 36"-48" | 1/2 | 60 | 40 | 2 | 2 | Connecting Plates | 00000000 | 00000000 |
Wd. | Roller | Ht. | No. of Stands | 3 ft. Lg. | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all | Between Frame | Spacing | Projection | Frame | O'all | Power, hp | Speed, fpm | Cap., lbs./ft. | Required | Included | Features | Each | |
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle | |||||||||||||
120V AC—Single Phase (Plug In) | |||||||||||||
| 31" | 28" | 3" | 1/4" | 5 1/2" | 36"-48" | 1/2 | 25-60 | 40 | 2 | 2 | Connecting Plates, On/Off Switch | 0000000 | 000000000 |
Wd. | Roller | Ht. | |||||||
|---|---|---|---|---|---|---|---|---|---|
| O'all | Between Frame | Spacing | Projection | Frame | O'all | Cap., lbs./ft. | Features | Each | |
3 ft. Lg. | |||||||||
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle | |||||||||
| 31" | 28" | 3" | 1/4" | 5 1/2" | 36"-48" | 40 | Connecting Plates | 00000000 | 0000000 |
4 ft. Lg. | |||||||||
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle | |||||||||
| 31" | 28" | 3" | 1/4" | 5 1/2" | 36"-48" | 40 | Connecting Plates | 00000000 | 000000 |
5 ft. Lg. | |||||||||
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle | |||||||||
| 31" | 28" | 3" | 1/4" | 5 1/2" | 36"-48" | 40 | Connecting Plates | 00000000 | 00000000 |
7 ft. Lg. | |||||||||
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle | |||||||||
| 31" | 28" | 3" | 1/4" | 5 1/2" | 36"-48" | 40 | Connecting Plates | 00000000 | 00000000 |
8 ft. Lg. | |||||||||
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle | |||||||||
| 31" | 28" | 3" | 1/4" | 5 1/2" | 36"-48" | 40 | Connecting Plates | 00000000 | 00000000 |
10 ft. Lg. | |||||||||
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle | |||||||||
| 31" | 28" | 3" | 1/4" | 5 1/2" | 36"-48" | 40 | Connecting Plates | 00000000 | 00000000 |
Wd. | Ht. | No. of Stands | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| O'all | Between Frame | Roller Projection | Frame | O'all | Cap., lbs./ft. | Required | Included | Features | Each | |
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle | ||||||||||
| 31" | 28" | 1/4" | 5 1/2" | 36"-48" | 40 | 3 | 1 | Connecting Plates | 00000000 | 000000000 |
Wd. | Roller | Ht. | No. of Stands | 6 ft. Lg. | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all | Between Frame | Spacing | Projection | Frame | O"all | Cap., lbs./ft. | Required | Included | Features | Choose a Drive Location | Each | |
1.9" Dia. GalvanizedSteel Rollers—7/16" Hex Axle | ||||||||||||
| 31" | 28" | 3" | 1/4" | 5 1/2" | 36"-48" | 40 | 2 | 1 | Connecting Plates | 00000000 | 000000000 | |
Conveyor Mount. Slot | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Conveyor Mount. Fasteners Included | No. of Conveyor Mount. Holes | Lg. | Wd. | Mount. Hole Ctr.-to-Ctr. | Floor Mount. Fasteners Included | No. of Floor Mount. Holes | Floor Mount. Hole Dia. | Each | |
For 16" Overall Wd. | ||||||||||
| 30 1/4" to 42 1/4" | Yes | 4 | 1" | 7/16" | 4" | No | 4 | 9/16" | 00000000 | 0000000 |
For 31" Overall Wd. | ||||||||||
| 30 1/4" to 42 1/4" | Yes | 4 | 1" | 7/16" | 4" | No | 4 | 9/16" | 00000000 | 000000 |
Abrasion-Resistant Roller Conveyors
Move delicate items, such as glass and painted parts, through your facility without scratching or denting them. Made of PVC, the rollers on these conveyors are softer and quieter than those on metal conveyors. However, they’re not as strong, so you should avoid moving heavy or sharp objects that could damage them. They convey objects with either flat or uneven bottoms, such as boxes or shipping tubes.
These conveyors don’t run on electricity, so their rollers require momentum from gravity, a push, or a different power source to move. Since they’re not wired, they’re quick to set up and easy to maintain. This makes them handy if another conveyor unexpectedly shuts down or you need to extend an existing line in a pinch.
Stands adjust in height.
Note: Capacities are based on an evenly distributed load. The length of the material you’re conveying should be at least three times the roller spacing.
For technical drawings and 3-D models, click on a part number.
Floor Mount. Slot | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Material | Color | Conveyor Mount. Fasteners Included | No. of Conveyor Mount. Holes | Conveyor Mount. Hole Dia. | Floor Mount. Fasteners Included | No. of Floor Mount. Holes | Lg. | Wd. | Each | |
For 30" Overall Wd. | |||||||||||
| 14" to 17" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 0000000 | 000000 |
| 17" to 23" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 00000000 | 00000 |
| 24" to 30" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 00000000 | 00000 |
| 31" to 37" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 00000000 | 00000 |
| 38" to 44" | Powder-Coated Steel | Blue | No | 8 | 5/16" | No | 4 | 1 1/4" | 7/16" | 00000000 | 000000 |