13" Between Frame Width Conveyors

For moving heavy products on shipping and assembly lines, these have three times the load capacity of our standard roller conveyors. Whether you’re creating a straight line, a curve to route items around equipment, or a decline to lower them into a truck trailer, mixing and matching conveyors and stands lets you customize your system as needed. These conveyors have rollers that transfer items with flat or uneven bottoms, such as boxes or shipping tubes.

Because these conveyors don’t run on electricity, their rollers require momentum from gravity, a push, or a powered conveyor to move. Since they’re not wired, they’re quick to set up and easy to maintain. This makes them handy if another conveyor unexpectedly shuts down or you need to extend an existing line in a pinch. However, these high-capacity conveyors weigh about twice as much as standard ones, so they require more effort to move around.

Choose a small roller spacing when conveying small items to prevent them from getting stuck between rollers. For large items, a large roller spacing helps minimize friction between your material and the rollers.

Note: Weight capacities are based on an evenly distributed load. The length of the material you’re conveying should be at least three times the roller spacing.

Straight Conveyor

	Wd.								2 1/4" Roller Spacing		3" Roller Spacing		4 1/2" Roller Spacing		6" Roller Spacing
	Overall	Between Frame	Lg., ft.	Projection	Frame Ht.	Wt. Cap. Per Lg. (No. of Stands Req.)	No. of Stands Included	Features		Each		Each		Each		Each
1.9" Dia. Steel Rollers—7/16" Hex Axle



		16"	13"	3	1/4"	3 1/2"	620 lb/ft (2)	0	Connecting Plates	———	0	5746K321	0000000	———	0	———	0


		16"	13"	4	1/4"	3 1/2"	620 lb/ft (2)	0	Connecting Plates	———	0	5746K322	000000	———	0	———	0
		16"	13"	5	1/4"	3 1/2"	620 lb/ft (2)	0	Connecting Plates	5746K223	0000000	5746K117	000000	5746K118	0000000	5746K623	0000000
		16"	13"	8	1/4"	3 1/2"	620 lb/ft (3), 115 lb/ft (2)	0	Connecting Plates	———	0	5746K323	000000	———	0	———	0
		16"	13"	10	1/4"	3 1/2"	620 lb/ft (3), 115 lb/ft (2)	0	Connecting Plates	5746K225	000000	5746K111	000000	5746K112	000000	5746K113	000000

90° Curved Conveyor

	Wd.
	Overall	Between Frame	Radius	Roller Projection	Frame Ht.	Wt. Cap. Per Lg. (No. of Stands Req.)	No. of Stands Included	Features		Each
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle



		16"	13"	32 1/2"	1/4"	3 1/2"	620 lb/ft (3)	0	Connecting Plates	5746K167	0000000

Lift Gate Conveyor


Shown Lifted

Lift gate conveyors can be raised up like a drawbridge, so you can quickly and safely pass through instead of walking around or using stairs to climb over. This gives you more flexibility in placing your conveyor, especially in cramped working environments. They’re spring loaded for easy lifting. Connect them to existing conveyors and a lift gate stand using their mounting plate.

	Wd.									3" Roller Spacing
	Overall	Between Frame	Lg., ft.	Opening Lg., ft.	Projection	Frame Ht.	Wt. Cap. Per Lg. (No. of Stands Req.)	No. of Stands Included	Features		Each
1.9" Dia. Steel Rollers—7/16" Hex Axle



		16"	13"	4	3 1/2	1/4"	3 1/2"	620 lb/ft (2)	0	Connecting Plates	5874N12	000000000

Motorized Roller Conveyors

Also known as line-shaft conveyors, these conveyors are driven by a drive shaft and round belts. Unlike belt conveyors, these have built-in accumulation, so packages can build up without crashing into one another or falling off the conveyor. The rollers are designed to smoothly transfer totes, packages, and other lightweight material. Shipping tubes, drums, and pails are less likely to get stuck in between rollers than between skate wheels.

Mix and match stands and conveyors to form straight lines, curve around obstacles, or create inclines. Only straight conveyor sections contain a motor, but they can power up to 60 ft. of conveyor extensions on either side. The motor can be reversed to send material in either direction.

Note: Weight capacities are based on an evenly distributed load. The length of the material you’re conveying should be at least three times the roller spacing.

Fixed Speed Straight Conveyor


		Replacement Stands

Fixed-speed conveyors travel at 60 fpm, a common industry rate, to move material.

Three-Phase Motor—Conveyors with three-phase motors balance power more evenly than single-phase motors, so they can handle heavier loads. While a conveyor with a single-phase motor may lag when a heavy load reaches the conveyor, a conveyor with a three-phase motor will continue smoothly.

	Wd.		Roller		Ht.						3 ft. Long
	Overall	Between Frame	Spacing	Projection	Frame	Overall	Power, hp	Speed, fpm	No. of Stands Included	Features	Wt. Cap. Per Lg. (No. of Stands Req.)		Each
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle







				120V AC—Single-Phase Motor (Plug In)

				16"	13"	3"	1/4"	5 1/2"	36" to 48"	1/2	60	2	Connecting Plates, On/Off Switch	40 lb/ft (2)	5898K301	000000000




						240/460V AC—Three-Phase Motor (Hardwire)

						16"	13"	3"	1/4"	5 1/2"	36" to 48"	1/2	60	2	Connecting Plates	40 lb/ft (2)	5898K11	00000000

Replacements for Conveyors

Replacement Stands

				Conveyor Mounting Slot
	Ht.	Conveyor Mounting Fasteners Included	No. of Conveyor Mounting Holes	Lg.	Wd.	Mounting Hole Ctr.-to-Ctr.	Floor Mounting Fasteners Included	No. of Floor Mounting Holes	Floor Mounting Hole Dia.		Each
For 16" Overall Width



		30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K781	0000000

Component		Each
Coupling Chain	5898K73	000000

	For Conveyor Type
Drive Belts


Straight Section	5898K912	00000

Roller Drive Belts


—	5898K97	0000

Component		Each
Drive Spool	5898K71	00000

Component		Each
Drive Spool Retaining Clip	5898K72	00000

Variable Speed Straight Conveyor


		Replacement Stands

Variable-speed conveyors adjust from standard conveyor speeds down to 25 fpm, so they’re often used to slow material flow for quality checks.

	Wd.		Roller		Ht.						3 ft. Long
	Overall	Between Frame	Spacing	Projection	Frame	Overall	Power, hp	Speed, fpm	No. of Stands Included	Features	Wt. Cap. Per Lg. (No. of Stands Req.)		Each
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle







				120V AC—Single-Phase Motor (Plug In)

				16"	13"	3"	1/4"	5 1/2"	36" to 48"	1/2	25 to 60	2	Connecting Plates, On/Off Switch	40 lb/ft (2)	7532N11	000000000

Replacements for Conveyors

Component		Each
Coupling Chain	5898K73	000000

	For Conveyor Type
Drive Belts


Straight Section	5898K912	00000

Roller Drive Belts


—	5898K97	0000

Component		Each
Drive Spool	5898K71	00000

Component		Each
Drive Spool Retaining Clip	5898K72	00000

Conveyor Extension


		Replacement Stands

	Wd.		Roller		Ht.				3 ft. Long		4 ft. Long		5 ft. Long		7 ft. Long		8 ft. Long		10 ft. Long
	Overall	Between Frame	Spacing	Projection	Frame	Overall	Wt. Cap. per Lg., lb/ft	Features		Each		Each		Each		Each		Each		Each
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle



		16"	13"	3"	1/4"	5 1/2"	36" to 48"	40	Connecting Plates	5898K401	0000000	5898K411	0000000	5898K12	0000000	5898K13	000000000	5898K421	000000000	5898K14	000000000

Replacements for Conveyors

Replacement Stands

				Conveyor Mounting Slot
	Ht.	Conveyor Mounting Fasteners Included	No. of Conveyor Mounting Holes	Lg.	Wd.	Mounting Hole Ctr.-to-Ctr.	Floor Mounting Fasteners Included	No. of Floor Mounting Holes	Floor Mounting Hole Dia.		Each
For 16" Overall Width



		30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K781	0000000

	For Conveyor Type
Drive Belts


Straight Section	5898K912	00000

Roller Drive Belts


—	5898K97	0000

Component		Each
Drive Spool	5898K71	00000

Component		Each
Drive Spool Retaining Clip	5898K72	00000

90° Curved Conveyor

Image of Attribute. Front orientation. Contains Annotated.

Replacement Stands

90° curved conveyors have tapered rollers that keep packages centered.

	Wd.				Ht.
	Overall	Between Frame	Radius	Roller Projection	Frame	Overall	Wt. Cap. Per Lg. (No. of Stands Req.)	No. of Stands Included	Features		Each
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle



		16"	13"	36"	1/4"	5 1/2"	36" to 48"	40 lb/ft (3)	1	Connecting Plates	5898K18	000000000

Replacements for Conveyors

Replacement Stands

				Conveyor Mounting Slot
	Ht.	Conveyor Mounting Fasteners Included	No. of Conveyor Mounting Holes	Lg.	Wd.	Mounting Hole Ctr.-to-Ctr.	Floor Mounting Fasteners Included	No. of Floor Mounting Holes	Floor Mounting Hole Dia.		Each
For 16" Overall Width



		30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K781	0000000

	For Conveyor Type
Drive Belts


Curved Section	5898K911	00000

Component		Each
Drive Spool	5898K71	00000

Component		Each
Drive Spool Retaining Clip	5898K72	00000

Lift Gate Conveyor


Conveyor Shown Lifted

Lift gate conveyors can be raised up like a drawbridge, so you can quickly and safely pass through your line. Install them in areas that don’t have room for crossover bridges to skip the long walk around. They’re spring-loaded, so they’re easier to lift than manual gates. Choose a lift gate with a drive shaft mounted to the same side as the conveyor you’re connecting it to. The drive shaft on curved conveyors is always mounted to the inside curve.

	Wd.			Roller		Ht.					6 ft. Long
	Overall	Between Frame	Opening Lg., ft.	Spacing	Projection	Frame	Overall	No. of Stands Included	Features	Choose a Drive Location	Wt. Cap. Per Lg. (No. of Stands Req.)		Each
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle



		16"	13"	3	3"	1/4"	5 1/2"	36" to 48"	1	Connecting Plates	Left Side, Right Side	40 lb/ft (2)	5898K901	000000000

Replacements for Conveyors

Roller Conveyors

Mix and match conveyors and stands to design a conveyor system that moves parts exactly where they need to go. These conveyors have rollers that transfer items with flat or uneven bottoms, such as boxes or shipping tubes. They’re more durable and carry heavier loads than belt and skate wheel conveyors.

These conveyors don’t run on electricity, so their rollers require momentum from gravity, a push, or a powered conveyor to move. Since they’re not wired, they’re quick to set up and easy to maintain. This makes them handy if another conveyor unexpectedly shuts down or you need to extend an existing line in a pinch.

Note: Weight capacities are based on an evenly distributed load. The length of the material you’re conveying should be at least three times the roller spacing.

Straight Conveyor


Galvanized Steel Rollers	Aluminum Rollers

Straight conveyors have connecting hooks to attach conveyor sections together.

Galvanized Steel Rollers—Conveyors with galvanized steel rollers carry heavier loads than conveyors with aluminum rollers.

Aluminum Rollers—Conveyors with aluminum rollers are roughly half the weight of conveyors with steel rollers, so they’re easier to install.

	Wd.						1 1/2" Roller Spacing		3" Roller Spacing		4 1/2" Roller Spacing		6" Roller Spacing
	Overall	Between Frame	Lg., ft.	Frame Ht.	Wt. Cap. Per Lg. (No. of Stands Req.)	No. of Stands Included		Each		Each		Each		Each
1 3/8" Dia. Galvanized Steel Rollers—1/4" Dia. Round Axle



		15"	13"	3	2 1/2"	200 lb/ft (2)	0	5694N43	0000000	———	0	———	0	———	0


		15"	13"	5	2 1/2"	200 lb/ft (2)	0	5825K82	000000	5825K25	0000000	5825K91	0000000	5825K98	0000000
		15"	13"	7	2 1/2"	200 lb/ft (3), 120 lb/ft (2)	0	5694N48	000000	———	0	———	0	———	0
		15"	13"	10	2 1/2"	200 lb/ft (3), 50 lb/ft (2)	0	5825K12	000000	5825K16	000000	5825K21	000000	5825K99	000000


		1 3/8" Dia. Aluminum Rollers—1/4" Dia. Round Axle



				15"	13"	5	2 1/2"	100 lb/ft (2)	0	58245K62	000000	58245K82	000000	58245K125	000000	58245K98	000000


				15"	13"	10	2 1/2"	100 lb/ft (3), 30 lb/ft (2)	0	58245K22	000000	58245K32	000000	58245K42	000000	58245K99	000000


				1.9" Dia. Galvanized Steel Rollers—1/4" Dia. Round Axle



						15"	13"	5	2 1/2"	200 lb/ft (2)	0	———	0	5675K18	000000	5675K82	000000	5675K58	000000


						15"	13"	10	2 1/2"	200 lb/ft (3), 50 lb/ft (2)	0	———	0	5675K12	000000	5675K22	000000	5675K32	000000

90° Curved Conveyor


Galvanized Steel Rollers	Aluminum Rollers

Image of Specification. Front orientation. Contains Annotated. Roller Conveyors, 90° Curved Conveyor.

Curved conveyors have connecting hooks to attach conveyor sections together.

Galvanized Steel Rollers—Conveyors with galvanized steel rollers carry heavier loads than conveyors with aluminum rollers.

Aluminum Rollers—Conveyors with aluminum rollers are roughly half the weight of conveyors with steel rollers, so they’re easier to install.

	Wd.
	Overall	Between Frame	Radius	Frame Ht.	Wt. Cap. Per Lg. (No. of Stands Req.)	No. of Stands Included		Each
1 3/8" Dia. Galvanized Steel Rollers—1/4" Dia. Round Axle



		15"	13"	36"	2 1/2"	200 lb/ft (3)	0	5825K76	0000000


		1 3/8" Dia. Aluminum Rollers—1/4" Dia. Round Axle



				15"	13"	36"	2 1/2"	100 lb/ft (3)	0	58245K12	000000


				1.9" Dia. Galvanized Steel Rollers—1/4" Dia. Round Axle



						15"	13"	36"	2 1/2"	200 lb/ft (3)	0	5675K52	000000

45° Curved Conveyor


Galvanized Steel Rollers	Aluminum Rollers

Curved conveyors have connecting hooks to attach conveyor sections together.

Galvanized Steel Rollers—Conveyors with galvanized steel rollers carry heavier loads than conveyors with aluminum rollers.

Aluminum Rollers—Conveyors with aluminum rollers are roughly half the weight of conveyors with steel rollers, so they’re easier to install.

	Wd.
	Overall	Between Frame	Radius	Frame Ht.	Wt. Cap. Per Lg. (No. of Stands Req.)	No. of Stands Included		Each
1 3/8" Dia. Galvanized Steel Rollers—1/4" Dia. Round Axle



		15"	13"	36"	2 1/2"	200 lb/ft (3)	0	5825K117	0000000


		1 3/8" Dia. Aluminum Rollers—1/4" Dia. Round Axle



				15"	13"	36"	2 1/2"	100 lb/ft (3)	0	58245K108	000000


				1.9" Dia. Galvanized Steel Rollers—1/4" Dia. Round Axle



						15"	13"	36"	2 1/2"	200 lb/ft (3)	0	5675K65	000000

Ball Transfer Conveyors

Use these ball transfer conveyors alone or add them to High-Capacity Roller Conveyors to rotate and position material along a conveying line.

Note: Weight capacities are based on an evenly distributed load with a stand at each end. The length and width of the material you're conveying should be at least three times the ball spacing.

Straight Conveyor

	Wd.				Ball		Ht.			4" Ball Spacing		3" Ball Spacing
	Between Frame	Overall	Lg., ft.	Wt. Cap. per Ball, lb.	Dia.	Projection	Frame	Overall	Features		Each		Each
Steel Ball with Zinc-Plated Steel Ball Transfer Housing



		13"	16"	2	65	1"	1/4"	3 1/2"	3 3/4"	Connecting Plates	2271T31	0000000	2271T1	0000000


		13"	16"	3	65	1"	1/4"	3 1/2"	3 3/4"	Connecting Plates	2271T21	000000	2271T14	000000

Accessories and Replacements for Conveyors

Stands

						Conveyor Mounting Slot				Floor Mounting Slot
	Ht.	Material	Color	Conveyor Mounting Fasteners Included	No. of Conveyor Mounting Holes	Lg.	Wd.	Floor Mounting Fasteners Included	No. of Floor Mounting Holes	Lg.	Wd.		Each
For 16" Overall Width



		16" to 21"	Powder-Coated Steel	Green	Yes	8	7/8"	13/32"	No	4	7/8"	13/32"	5183K61	000000


		20" to 25"	Powder-Coated Steel	Green	Yes	8	7/8"	13/32"	No	4	7/8"	13/32"	5183K62	00000
		24" to 35"	Powder-Coated Steel	Green	Yes	8	7/8"	13/32"	No	4	7/8"	13/32"	5183K63	000000
		34" to 45"	Powder-Coated Steel	Green	Yes	8	7/8"	13/32"	No	4	7/8"	13/32"	5183K64	000000

Motorized Round-Groove Conveyor Rollers

Also known as drive rollers, these connect to rollers with two grooves to power conveyors. The bearings are quiet-rolling to reduce conveyor noise and are shielded to keep out dirt and debris.

24V DC—Continuous Duty Cycle with Up to 30 Starts and Stops per Minute


Hex Axle Galvanized Steel Rollers

			Roller							Bearing
	For Between Frame Wd.	For Belt Dia.	Wd.	Ga.	Wt. Cap., lb.	Bearing-to-Groove Wd.	Groove Ctr.-to-Ctr. Wd.	Overall Wd.	Wire Lead Lg.	Seal Type	Material	Temp. Range, ° F	Features	Includes	Choose a Speed, fpm		Each
7/16" Hex Axle







				1.9" Dia. Galvanized Steel Rollers

				13"	3/16"	12.88"	16	70	2.50"	1.3"	14"	19"	Shielded	Steel	32 to 100	Integrated Current-Limiting Circuit, Quiet-Rolling Bearings	Zone Control Card	4 to 70, 6 to 114, 8 to 163	2250T45	0000000

120V AC (Single-Phase Motor)—3 Seconds On, 2 Seconds Off Duty Cycle


Hex Axle Zinc-Plated Steel Rollers

			Roller							Bearing
	For Between Frame Wd.	For Belt Dia.	Wd.	Ga.	Wt. Cap., lb.	Bearing-to-Groove Wd.	Groove Ctr.-to-Ctr. Wd.	Overall Wd.	Wire Lead Lg.	Seal Type	Material	Temp. Range, ° F	Features	Includes	Choose a Speed, fpm		Each
7/16" Hex Axle







				1.9" Dia. Zinc-Plated Steel Rollers

				13"	3/16"	12 7/16"	16	120	2.17"	1.3"	14 1/16"	2"	Shielded	Steel	14 to 100	Quiet-Rolling Bearings	Terminal Block	33, 53, 67	2298T21	0000000

Material Support Stands


Style A	Style D	Style F

Roller Support—Rollers support and help guide material into machinery.

					Roller			Base
	Style	Between Frame Wd.	Ht.	Wt. Cap., lb.	Dia.	Spacing	Material	Lg.	Wd.	Material	Features		Each
Roller Support







				Bipod Stand

				A	13"	28" to 42"	250	1 7/8"	—	Steel	18"	15 1/2"	Steel	Folding Legs, Nonskid Feet	5771K51	0000000




						Pedestal Stand

						D	13"	26 1/2" to 43 1/2"	500	1 3/8"	4"	Galvanized Steel	18"	15"	Steel	Leveling Feet	5760K68	000000




								Table Stand

								F	13"	26 1/2" to 43 1/2"	500	1 3/8"	4"	Galvanized Steel	66"	15"	Steel	Folding Legs, Leveling Feet	5760K65	000000

High-Capacity Large-Diameter Roller Conveyors

For more demanding shipping and assembly applications, these conveyors can carry heavy loads.

Note: Weight capacities are based on an evenly distributed load with at least one stand at each end for straight conveyors, and an additional stand in the center for curved conveyors. The length of the material you’re conveying should be at least three times the roller spacing.

90° Curved Conveyor

	Wd.
	Overall	Between Frame	Radius	Roller Projection	Frame Ht.	Wt. Cap. Per Lg. (No. of Stands Req.)	No. of Stands Included	Features		Each
2 1/2" Dia. Steel Rollers—11/16" Hex Axle



		16"	13"	32 1/2"	1/4"	4"	800 lb/ft (3)	0	Connecting Plates	5747K92	0000000

1.9" Diameter Conveyor Rollers


Hex Axle	Round Axle


Hex Axle	Round Axle

Replace damaged rollers or use multiple rollers to build a custom conveyor.

		Roller							Each
	For Between Frame Wd.	Wd.	Ga.	Wt. Cap., lb.	Overall Wd.	Bearing Material	Temp. Range, ° F		1-24	25-99	100-Up
7/16" Hex Axle







				1.9" Dia. Galvanized Steel Rollers

				13"	12 19/32"	16	265	14 1/4"	Zinc-Plated Steel	-20 to 300	2277T13	000000	000000	000000


				1/4" Round Axle







								1.9" Dia. Galvanized Steel Rollers

								13"	12 9/16"	16	125	14"	Steel	-15 to 220	5890K306	00000	00000	00000

1.9" Diameter Motorized Conveyor Rollers

Add power to a gravity conveyor or build a custom powered conveyor. Rollers can be hardwired to operate in either direction. They have shielded bearings to keep out dust and debris.

120V AC (Single-Phase Motor)—Continuous Duty

		Roller					Bearing
	For Between Frame Wd.	Wd.	Ga.	Wt. Cap., lb.	Overall Wd.	Wire Lead Lg.	Seal Type	Material	Temp. Range, ° F	Includes	Choose a Speed, fpm		Each
7/16" Hex Axle







				1.9" Dia. Zinc-Plated Steel Rollers

				13"	12 3/8"	17	140	14 1/4"	2"	Shielded	Zinc-Plated Steel	15 to 100	Terminal Block	33, 53, 67	1711N21	0000000

Large-Diameter Conveyor Rollers


Hex Axle	Round Axle


Hex Axle	Round Axle

Steel Rollers—Steel rollers are stronger than aluminum rollers.

Aluminum Rollers—Aluminum rollers are lightweight and corrosion resistant.

		Roller				Bearing
	For Between Frame Wd.	Wd.	Ga.	Wt. Cap., lb.	Overall Wd.	Seal Type	Material	Temp. Range, ° F		Each
7/16" Hex Axle







				2" Dia. Steel Rollers

				13"	12 9/16"	12	300	14 1/8"	—	Galvanized Steel	-15 to 220	7535N107	000000




						2 1/2" Dia. Steel Rollers

						13"	12 5/16"	11	285	14 1/4"	—	Zinc-Plated Steel	-10 to 400	2281T43	00000


						11/16" Hex Axle







										2" Dia. Steel Rollers

										13"	12 5/8"	11	700	15"	Shielded	Steel	-10 to 225	7535N21	000000




												2 1/2" Dia. Steel Rollers

												13"	12 7/16"	11	645	15"	—	Steel	-40 to 300	2281T54	00000


												1/4" Round Axle







																2" Dia. Aluminum Rollers

																13"	12 1/2"	16	65	14"	—	Steel	-15 to 220	2276T73	00000

Small-Diameter Conveyor Rollers

Galvanized Steel Rollers—Galvanized steel rollers are strong and have some corrosion resistance.

Aluminum Rollers—Aluminum rollers are lightweight and more corrosion resistant than galvanized steel.

		Roller
	For Between Frame Wd.	Wd.	Ga.	Wt. Cap., lb.	Overall Wd.	Bearing Material	Temp. Range, ° F		Each
1/4" Round Axle







				3/4" Dia. Galvanized Steel Rollers

				13"	12 3/4"	20	30	13 3/4"	Steel	-15 to 220	6409N31	000000




						1 3/8" Dia. Galvanized Steel Rollers

						13"	12 1/2"	18	65	14"	Steel	-5 to 400	2282T13	00000




								1 3/8" Dia. Aluminum Rollers

								13"	12 1/2"	18	40	14"	Steel	-15 to 220	2282T32	00000

Round-Groove Conveyor Rollers


Hex Axle Galvanized Steel Rollers 1 Groove	Hex Axle Galvanized Steel Rollers 2 Grooves

Rollers are grooved to accommodate round belts on line-shaft conveyors.

2 Grooves—Rollers with two grooves can be used with motorized roller conveyors.

			Roller
	For Between Frame Wd.	For Belt Dia.	Wd.	Ga.	Wt. Cap., lb.	Bearing-to-Groove Wd.	Groove Ctr.-to-Ctr. Wd.	Overall Wd.	Ball Bearing Material	Temp. Range, ° F		Each
7/16" Hex Axle—1.9" Dia. Galvanized Steel Rollers







				1 Groove

				13"	3/16"	12 19/32"	16	265	2.75"	—	14 1/4"	Steel	-20 to 350	2334T62	000000




						2 Grooves

						13"	3/16"	12 5/8"	16	265	2.17"	1.3"	14 1/4"	Zinc-Plated Steel	-20 to 350	2334T89	00000


						13"	3/16"	12 7/8"	16	225	2.50"	1.3"	14"	Steel	-40 to 212	2334T72	00000

1.9" Diameter Abrasion-Resistant Conveyor Rollers


Hex Axle PVC Rollers	Hex Axle, Polyethylene-Coated Steel Rollers

Hex Axle, Polyurethane-Coated Steel Rollers

The nonmarring roller surface protects material better than all-metal rollers.

PVC Rollers—PVC rollers are for light duty applications.

Polyethylene-Coated Steel Rollers—Polyethylene-coated rollers are nonstick.

Polyurethane-Coated Steel Rollers—Polyurethane-coated rollers are the most abrasion resistant.

Quiet-Rolling Bearings—Rollers with quiet-rolling bearings have maintenance-free, precision bearings to reduce conveyor noise.

		Roller
	For Between Frame Wd.	Wd.	Thk.	Ga.	Coating Thk.	Wt. Cap., lb.	Overall Wd.	Bearing Material	Temp. Range, ° F	Features		Each
7/16" Hex Axle







				1.9" Dia. PVC Rollers—Gray

				13"	12 7/8"	1/8"	—	—	40	14"	Plastic	14 to 175	—	2255T34	000000




						1.9" Dia. Polyethylene-Coated Steel Rollers—White

						13"	12 3/8"	—	16	0.08"	150	14"	Plastic	10 to 150	Quiet-Rolling Bearings	2210T24	00000




								1.9" Dia. Polyurethane-Coated Steel Rollers—Orange

								13"	12 1/2"	—	16	0.13"	250	14 1/8"	Steel	-20 to 150	—	2255T144	00000




										1.9" Dia. Polyurethane-Coated Steel Rollers—Black

										13"	12 3/8"	—	16	0.08"	150	14"	Plastic	10 to 150	Quiet-Rolling Bearings	2446T64	00000

Tapered Round-Groove Conveyor Rollers

Rollers taper from approximately 2 _1/2" diameter on the outside to 1 _5/8" on the inside so packages maintain their orientation on line-shaft conveyors.

			Roller
	For Between Frame Wd.	For Belt Dia.	Wd.	Ga.	Wt. Cap., lb.	Bearing-to-Groove Wd.	Groove Ctr.-to-Ctr. Wd.	Overall Wd.	Bearing Material	Temp. Range, ° F		Each
7/16" Hex Axle







				1 5/8" to 2 1/2" Dia. Steel Rollers

				13"	3/16"	12 1/4"	14	290	1.75"	1"	14 1/4"	Steel	-40 to 250	2312T31	0000000

Conveyor Stops

Add a stop on a conveyor to control product flow and allow for accumulation.

Bolt On

Bolt-on stops attach to the conveyor frame.

	For Overall Wd.	Lg.	Wd.	Ht.	Ga.	Mounting Fasteners Included	No. of Mounting Holes	Mounting Hole Dia.	Mounting Hole Ctr.-to-Ctr.	Color		Each
Powder-Coated Steel



	13"	15"	1 1/2"	15"	1 1/2"	10	Yes	2	1/4"	14"	Blue	5899K74	000000

Hook On

Hook-on stops slide over a roller to create a barrier.

	For Overall Wd.	Lg.	Wd.	Ht.	Ga.	For Max. Roller Dia.	Color		Each
Powder-Coated Steel



	13"	15"	12"	12 1/2"	3"	12	1.9"	Blue	5899K64	000000

Large-Diameter Corrosion-Resistant Conveyor Rollers

All stainless steel construction makes these rollers suitable for washdown applications. Shielded bearings block out dust and other contaminants.

		Roller				Bearing
	For Between Frame Wd.	Wd.	Ga.	Wt. Cap., lb.	Overall Wd.	Seal Type	Material	Temp. Range, ° F	Features		Each
7/16" Hex Axle







				2 1/2" Dia. Stainless Steel Rollers

				13"	12 7/8"	14	170	14"	Shielded	Stainless Steel	0 to 150	—	2281T913	0000000


				11/16" Hex Axle







								2 1/2" Dia. Stainless Steel Rollers

								13"	12 7/8"	11	400	14 1/2"	Shielded	Plastic	10 to 150	Quiet-Rolling Bearings	2281T919	000000

Tapered Conveyor Rollers for Curves

Improve tracking on curved sections of 1.9" diameter conveyors. Rollers taper from approximately 2 _1/2" diameter on the outside to 1 _5/8" on the inside.

		Roller
	For Between Frame Wd.	Wd.	Ga.	Wt. Cap., lb.	Overall Wd.	Bearing Material	Temp. Range, ° F		Each
7/16" Hex Axle







				1 5/8" to 2 1/2" Dia. Galvanized Steel Rollers

				13"	12 7/8"	14	285	14 1/4"	Steel	-20 to 220	2245T101	000000

1.9" Diameter Corrosion-Resistant Conveyor Rollers


		Hex Axle	Round Axle

Made from stainless steel, these rollers are suitable for washdown applications.

Sealed Bearing—Sealed bearings keep out dirt and moisture for longer life.

		Roller				Bearing
	For Between Frame Wd.	Wd.	Ga.	Wt. Cap., lb.	Overall Wd.	Seal Type	Material	Temp. Range, ° F		Each
7/16" Hex Axle







				1.9" Dia. Stainless Steel Rollers

				13"	12 3/8"	16	170	14"	Sealed	Plastic	10 to 150	2247T5	000000


				1/4" Round Axle







								1.9" Dia. Stainless Steel Rollers

								13"	12 3/8"	16	35	14"	Sealed	Plastic	10 to 150	2247T73	00000

1.9" Diameter Dent-Resistant Conveyor Rollers

Rollers are made from thick, 12-ga. steel so they're less likely to dent than standard 16-ga. rollers.

		Roller
	For Between Frame Wd.	Wd.	Ga.	Wt. Cap., lb.	Overall Wd.	Bearing Material	Temp. Range, ° F		Each
7/16" Hex Axle







				1.9" Dia. Steel Rollers

				13"	12 7/8"	12	525	14"	Zinc-Plated Steel	-20 to 250	2565T44	000000

1.9" Diameter Quiet-Rolling Conveyor Rollers

Rollers have maintenance-free, precision bearings to reduce conveyor noise.

		Roller
	For Between Frame Wd.	Wd.	Ga.	Wt. Cap., lb.	Overall Wd.	Bearing Material	Temp. Range, ° F	Features		Each
7/16" Hex Axle







				1.9" Dia. Galvanized Steel Rollers

				13"	12 3/32"	16	300	14 1/4"	Plastic	-20 to 165	Quiet-Rolling Bearings	2263T3	000000