McMaster-Carr logo
    Filter by
    System of Measurement
    Between Frame Width
    Roller Spacing
    Axle Shape
    Number of Stands Required
    Ball Bearing Material
    Bearing Type
    Hex Axle Size
    Axle Diameter
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    113 Products

    Roller Conveyors

    Mix and match conveyors and stands to design a conveyor system that moves parts exactly where they need to go. These conveyors have rollers that transfer items with flat or uneven bottoms, such as boxes or shipping tubes. They’re more durable and carry heavier loads than belt and skate wheel conveyors.
    These conveyors don’t run on electricity, so their rollers require momentum from gravity, a push, or a powered conveyor to move. Since they’re not wired, they’re quick to set up and easy to maintain. This makes them handy if another conveyor unexpectedly shuts down or you need to extend an existing line in a pinch.
    Note: Weight capacities are based on an evenly distributed load. The length of the material you’re conveying should be at least three times the roller spacing.
    Straight Conveyor
    Image of Attribute. Front orientation. Contains Annotated. Conveyors. Roller Conveyors, Straight Conveyor, Galvanized Steel Rollers.
    Image of Attribute. Front orientation. Contains Annotated. Conveyors. Roller Conveyors, Straight Conveyor, Aluminum Rollers.
    Image of Attribute. Front orientation. Contains Annotated.

    Galvanized Steel Rollers

    Aluminum Rollers

    Straight conveyors have connecting hooks to attach conveyor sections together.
    Galvanized Steel Rollers—Conveyors with galvanized steel rollers carry heavier loads than conveyors with aluminum rollers.
    Aluminum Rollers—Conveyors with aluminum rollers are roughly half the weight of conveyors with steel rollers, so they’re easier to install.
    Wd.
    1 1/2" Roller
    Spacing
    3" Roller
    Spacing
    4 1/2" Roller
    Spacing
    6" Roller
    Spacing
    Overall
    Between
    Frame
    Lg.,
    ft.
    Frame
    Ht.
    Wt. Cap. Per Lg. (No.
    of Stands Req.)
    No. of Stands
    Included
    Each
    Each
    Each
    Each
    1 3/8" Dia. Galvanized Steel Rollers—1/4" Dia. Round Axle
    18"16"32 1/2"200 lb/ft (2)05694N440000000———0———0———0
    18"16"52 1/2"200 lb/ft (2)05825K830000005825K2600000005825K9200000005825K1010000000
    18"16"72 1/2"200 lb/ft (3), 120 lb/ft (2)05694N49000000———0———0———0
    18"16"102 1/2"200 lb/ft (3), 50 lb/ft (2)05825K130000005825K170000005825K220000005825K102000000
     
    1 3/8" Dia. Aluminum Rollers—1/4" Dia. Round Axle
    18"16"52 1/2"100 lb/ft (2)058245K6300000058245K8300000058245K12600000058245K101000000
    18"16"102 1/2"100 lb/ft (3), 30 lb/ft (2)058245K2300000058245K3300000058245K4300000058245K102000000
     
    1.9" Dia. Galvanized Steel Rollers—1/4" Dia. Round Axle
    18"16"52 1/2"200 lb/ft (2)0———05675K190000005675K830000005675K59000000
    18"16"102 1/2"200 lb/ft (3), 50 lb/ft (2)0———05675K130000005675K230000005675K33000000
     
    90° Curved Conveyor
    Image of Product. Front orientation. Conveyors. Roller Conveyors, 90° Curved Conveyor, Galvanized Steel Rollers.
    Image of Product. Front orientation. Conveyors. Roller Conveyors, 90° Curved Conveyor, Aluminum Rollers.

    Galvanized Steel Rollers

    Aluminum Rollers

    Image of Attribute. Front orientation. Contains Annotated.
    Image of Specification. Front orientation. Contains Annotated. Roller Conveyors, 90° Curved Conveyor.
    Curved conveyors have connecting hooks to attach conveyor sections together.
    Galvanized Steel Rollers—Conveyors with galvanized steel rollers carry heavier loads than conveyors with aluminum rollers.
    Aluminum Rollers—Conveyors with aluminum rollers are roughly half the weight of conveyors with steel rollers, so they’re easier to install.
    Wd.
    Overall
    Between
    Frame
    Radius
    Frame
    Ht.
    Wt. Cap. Per Lg. (No.
    of Stands Req.)
    No. of Stands
    Included
    Each
    1 3/8" Dia. Galvanized Steel Rollers—1/4" Dia. Round Axle
    18"16"36"2 1/2"200 lb/ft (3)05825K770000000
     
    1 3/8" Dia. Aluminum Rollers—1/4" Dia. Round Axle
    18"16"36"2 1/2"100 lb/ft (3)058245K13000000
     
    1.9" Dia. Galvanized Steel Rollers—1/4" Dia. Round Axle
    18"16"36"2 1/2"200 lb/ft (3)05675K53000000
     
    45° Curved Conveyor
    Image of Product. Front orientation. Conveyors. Roller Conveyors, 45° Curved Conveyor, Galvanized Steel Rollers.
    Image of Product. Front orientation. Conveyors. Roller Conveyors, 45° Curved Conveyor, Aluminum Rollers.

    Galvanized Steel Rollers

    Aluminum Rollers

    Image of Attribute. Front orientation. Contains Annotated.
    Image of Specification. Front orientation. Contains Annotated. Roller Conveyors, 45° Curved Conveyor.
    Curved conveyors have connecting hooks to attach conveyor sections together.
    Galvanized Steel Rollers—Conveyors with galvanized steel rollers carry heavier loads than conveyors with aluminum rollers.
    Aluminum Rollers—Conveyors with aluminum rollers are roughly half the weight of conveyors with steel rollers, so they’re easier to install.
    Wd.
    Overall
    Between
    Frame
    Radius
    Frame
    Ht.
    Wt. Cap. Per Lg. (No.
    of Stands Req.)
    No. of Stands
    Included
    Each
    1 3/8" Dia. Galvanized Steel Rollers—1/4" Dia. Round Axle
    18"16"36"2 1/2"200 lb/ft (3)05825K1180000000
     
    1 3/8" Dia. Aluminum Rollers—1/4" Dia. Round Axle
    18"16"36"2 1/2"100 lb/ft (3)058245K109000000
     
    1.9" Dia. Galvanized Steel Rollers—1/4" Dia. Round Axle
    18"16"36"2 1/2"200 lb/ft (3)05675K66000000
     
    Lift Gate Conveyor
    Image of ProductInUse. Shown Lifted. Front orientation. Contains Border. Conveyors. Roller Conveyors, Lift Gate Conveyor.

    Shown Lifted

    Image of Attribute. Front orientation. Contains Annotated. Conveyors. Roller Conveyors, Lift Gate Conveyor.
    Image of Attribute. Front orientation. Contains Annotated.
    Lift gate conveyors can be raised like a drawbridge, so you can safely walk through your line. Install them in areas that don’t have room for crossover bridges to skip the long walk around your conveyor. The gate is spring loaded, which makes it easy to lift without effort. These conveyors have a mounting plate to connect to an existing conveyor.
    Galvanized Steel Rollers—Conveyors with galvanized steel rollers carry heavier loads than conveyors with aluminum rollers.
    Wd.
    3" Roller
    Spacing
    Overall
    Between
    Frame
    Lg.,
    ft.
    Opening
    Lg., ft.
    Frame
    Ht.
    Wt. Cap. Per Lg. (No.
    of Stands Req.)
    No. of Stands
    Included
    Each
    1 3/8" Dia. Galvanized Steel Rollers—1/4" Dia. Round Axle
    18"16"32 1/22 1/2"200 lb/ft (0)05694N540000000
     

    Motorized Roller Conveyors

    Also known as line-shaft conveyors, these conveyors are driven by a drive shaft and round belts. Unlike belt conveyors, these have built-in accumulation, so packages can build up without crashing into one another or falling off the conveyor. The rollers are designed to smoothly transfer totes, packages, and other lightweight material. Shipping tubes, drums, and pails are less likely to get stuck in between rollers than between skate wheels.
    Mix and match stands and conveyors to form straight lines, curve around obstacles, or create inclines. Only straight conveyor sections contain a motor, but they can power up to 60 ft. of conveyor extensions on either side. The motor can be reversed to send material in either direction.
    Note: Weight capacities are based on an evenly distributed load. The length of the material you’re conveying should be at least three times the roller spacing.
    Fixed Speed Straight Conveyor
    Image of Product. Front orientation. Contains Annotated. Conveyors. Motorized Roller Conveyors, Fixed Speed Straight Conveyor.
    Image of Attribute. Front orientation. Contains Annotated.
    Image of Specification. Replacement Stands. Front orientation. Conveyors. Motorized Roller Conveyors, Fixed Speed Straight Conveyor.

    Replacement Stands

    Fixed-speed conveyors travel at 60 fpm, a common industry rate, to move material.
    Three-Phase Motor—Conveyors with three-phase motors balance power more evenly than single-phase motors, so they can handle heavier loads. While a conveyor with a single-phase motor may lag when a heavy load reaches the conveyor, a conveyor with a three-phase motor will continue smoothly.
    Wd.
    Roller
    Ht.
    3 ft. Long
    Overall
    Between
    Frame
    Spacing
    Projection
    Frame
    Overall
    Power,
    hp
    Speed,
    fpm
    No. of Stands
    Included
    Features
    Wt. Cap. Per Lg. (No.
    of Stands Req.)
    Each
    1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle
     
    120V AC—Single-Phase Motor (Plug In)
    19"16"3"1/4"5 1/2"36" to 48"1/2602Connecting Plates, On/Off Switch40 lb/ft (2)5898K303000000000
     
    240/460V AC—Three-Phase Motor (Hardwire)
    19"16"3"1/4"5 1/2"36" to 48"1/2602Connecting Plates40 lb/ft (2)5898K2100000000
     
    Replacements for Conveyors
    Replacement Stands
    Conveyor
    Mounting Slot
    Ht.
    Conveyor Mounting
    Fasteners Included
    No. of Conveyor
    Mounting Holes
    Lg.
    Wd.
    Mounting Hole
    Ctr.-to-Ctr.
    Floor Mounting Fasteners
    Included
    No. of Floor
    Mounting Holes
    Floor Mounting
    Hole Dia.
    Each
    For 19" Overall Width
    30 1/4" to 42 1/4"Yes41"7/16"4"No49/16"5898K7820000000
     
    Replacement Conveyor Roller Coupling Chains
    Image of Product. Front orientation. Conveyor Roller Coupling Chains.
    Component
    Each
    Coupling Chain5898K73000000
    Replacement Belts
    Image of Product. Front orientation. Round Belts.
    For Conveyor
    Type
    Each
    Drive Belts
    Straight Section5898K91200000
     
    Roller Drive Belts
    —5898K970000
     
    Replacement Conveyor Roller Spools
    Image of Product. Front orientation. Conveyor Roller Spools.
    Component
    Each
    Drive Spool5898K7100000
    Replacement Conveyor Roller Spool Clips
    Image of Product. Front orientation. Conveyor Roller Spool Clips.
    Component
    Each
    Drive Spool Retaining Clip5898K7200000
    Variable Speed Straight Conveyor
    Image of ProductInUse. Front orientation. Contains Annotated. Conveyors. Motorized Roller Conveyors, Variable Speed Straight Conveyor.
    Image of Attribute. Front orientation. Contains Annotated.
    Image of Specification. Replacement Stands. Front orientation. Conveyors. Motorized Roller Conveyors, Variable Speed Straight Conveyor.

    Replacement Stands

    Variable-speed conveyors adjust from standard conveyor speeds down to 25 fpm, so they’re often used to slow material flow for quality checks.
    Wd.
    Roller
    Ht.
    3 ft. Long
    Overall
    Between
    Frame
    Spacing
    Projection
    Frame
    Overall
    Power,
    hp
    Speed,
    fpm
    No. of Stands
    Included
    Features
    Wt. Cap. Per Lg. (No.
    of Stands Req.)
    Each
    1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle
     
    120V AC—Single-Phase Motor (Plug In)
    19"16"3"1/4"5 1/2"36" to 48"1/225 to 602Connecting Plates, On/Off Switch40 lb/ft (2)7532N13000000000
     
    Replacements for Conveyors
    Replacement Conveyor Roller Coupling Chains
    Image of Product. Front orientation. Conveyor Roller Coupling Chains.
    Component
    Each
    Coupling Chain5898K73000000
    Replacement Belts
    Image of Product. Front orientation. Round Belts.
    For Conveyor
    Type
    Each
    Drive Belts
    Straight Section5898K91200000
     
    Roller Drive Belts
    —5898K970000
     
    Replacement Conveyor Roller Spools
    Image of Product. Front orientation. Conveyor Roller Spools.
    Component
    Each
    Drive Spool5898K7100000
    Replacement Conveyor Roller Spool Clips
    Image of Product. Front orientation. Conveyor Roller Spool Clips.
    Component
    Each
    Drive Spool Retaining Clip5898K7200000
    Conveyor Extension
    Image of Product. Front orientation. Contains Annotated. Conveyors. Motorized Roller Conveyors, Conveyor Extension.
    Image of Attribute. Front orientation. Contains Annotated.
    Image of Specification. Replacement Stands. Front orientation. Conveyors. Motorized Roller Conveyors, Conveyor Extension.

    Replacement Stands

    Wd.
    Roller
    Ht.
    3 ft. Long
    4 ft. Long
    5 ft. Long
    7 ft. Long
    8 ft. Long
    10 ft. Long
    Overall
    Between
    Frame
    Spacing
    Projection
    Frame
    Overall
    Wt. Cap. per
    Lg., lb/ft
    Features
    Each
    Each
    Each
    Each
    Each
    Each
    1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle
    19"16"3"1/4"5 1/2"36" to 48"40Connecting Plates5898K40300000005898K41300000005898K2200000005898K230000000005898K4230000000005898K24000000000
     
    Replacements for Conveyors
    Replacement Stands
    Conveyor
    Mounting Slot
    Ht.
    Conveyor Mounting
    Fasteners Included
    No. of Conveyor
    Mounting Holes
    Lg.
    Wd.
    Mounting Hole
    Ctr.-to-Ctr.
    Floor Mounting Fasteners
    Included
    No. of Floor
    Mounting Holes
    Floor Mounting
    Hole Dia.
    Each
    For 19" Overall Width
    30 1/4" to 42 1/4"Yes41"7/16"4"No49/16"5898K7820000000
     
    Replacement Belts
    Image of Product. Front orientation. Round Belts.
    For Conveyor
    Type
    Each
    Drive Belts
    Straight Section5898K91200000
     
    Roller Drive Belts
    —5898K970000
     
    Replacement Conveyor Roller Spools
    Image of Product. Front orientation. Conveyor Roller Spools.
    Component
    Each
    Drive Spool5898K7100000
    Replacement Conveyor Roller Spool Clips
    Image of Product. Front orientation. Conveyor Roller Spool Clips.
    Component
    Each
    Drive Spool Retaining Clip5898K7200000
    90° Curved Conveyor
    Image of ProductInUse. Front orientation. Conveyors. Motorized Roller Conveyors, 90° Curved Conveyor.
    Image of Attribute. Top orientation. Contains Annotated. Motorized Roller Conveyors, 90° Curved Conveyor.
    Image of Attribute. Front orientation. Contains Annotated.
    Image of Specification. Replacement Stands. Front orientation. Conveyors. Motorized Roller Conveyors, 90° Curved Conveyor.

    Replacement Stands

    90° curved conveyors have tapered rollers that keep packages centered.
    Wd.
    Ht.
    Overall
    Between
    Frame
    Radius
    Roller
    Projection
    Frame
    Overall
    Wt. Cap. Per Lg. (No.
    of Stands Req.)
    No. of Stands
    Included
    Features
    Each
    1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle
    19"16"36"1/4"5 1/2"36" to 48"40 lb/ft (3)1Connecting Plates5898K28000000000
     
    Replacements for Conveyors
    Replacement Stands
    Conveyor
    Mounting Slot
    Ht.
    Conveyor Mounting
    Fasteners Included
    No. of Conveyor
    Mounting Holes
    Lg.
    Wd.
    Mounting Hole
    Ctr.-to-Ctr.
    Floor Mounting Fasteners
    Included
    No. of Floor
    Mounting Holes
    Floor Mounting
    Hole Dia.
    Each
    For 19" Overall Width
    30 1/4" to 42 1/4"Yes41"7/16"4"No49/16"5898K7820000000
     
    Replacement Belts
    Image of Product. Front orientation. Round Belts.
    For Conveyor
    Type
    Each
    Drive Belts
    Curved Section5898K91100000
     
    Replacement Conveyor Roller Spools
    Image of Product. Front orientation. Conveyor Roller Spools.
    Component
    Each
    Drive Spool5898K7100000
    Replacement Conveyor Roller Spool Clips
    Image of Product. Front orientation. Conveyor Roller Spool Clips.
    Component
    Each
    Drive Spool Retaining Clip5898K7200000
    Lift Gate Conveyor
    Image of ProductInUse. Conveyor Shown Lifted. Front orientation. Contains Border. Conveyors. Motorized Roller Conveyors, Lift Gate Conveyor.
    Image of Product. Front orientation. Contains Annotated. Conveyors. Motorized Roller Conveyors, Lift Gate Conveyor.
    Image of Attribute. Front orientation. Contains Annotated.

    Conveyor Shown Lifted

    Lift gate conveyors can be raised up like a drawbridge, so you can quickly and safely pass through your line. Install them in areas that don’t have room for crossover bridges to skip the long walk around. They’re spring-loaded, so they’re easier to lift than manual gates. Choose a lift gate with a drive shaft mounted to the same side as the conveyor you’re connecting it to. The drive shaft on curved conveyors is always mounted to the inside curve.
    Wd.
    Roller
    Ht.
    6 ft. Long
    Overall
    Between
    Frame
    Opening
    Lg., ft.
    Spacing
    Projection
    Frame
    Overall
    No. of Stands
    Included
    Features
    Choose a Drive
    Location
    Wt. Cap. Per Lg. (No.
    of Stands Req.)
    Each
    1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle
    19"16"33"1/4"5 1/2"36" to 48"1Connecting PlatesLeft Side, Right Side40 lb/ft (2)5898K903000000000
     
    Replacements for Conveyors
    Replacement Belts
    Image of Product. Front orientation. Round Belts.
    For Conveyor
    Type
    Each
    Drive Belts
    Straight Section5898K91200000
     
    Roller Drive Belts
    —5898K970000
     
    Replacement Conveyor Roller Spools
    Image of Product. Front orientation. Conveyor Roller Spools.
    Component
    Each
    Drive Spool5898K7100000
    Replacement Conveyor Roller Spool Clips
    Image of Product. Front orientation. Conveyor Roller Spool Clips.
    Component
    Each
    Drive Spool Retaining Clip5898K7200000

    Stainless Steel Roller Conveyors

    Conveyors are made of corrosion-resistant stainless steel, making them suitable for washdown applications.
    Note: Weight capacities are based on an evenly distributed load with at least one stand at each end for straight conveyors, and an additional stand in the center for curved conveyors. The length of the material you’re conveying should be at least three times the roller spacing.
    Straight Conveyor
    Image of Product. Front orientation. Contains Annotated. Conveyors. Stainless Steel Roller Conveyors, Straight Conveyor.
    Image of Attribute. Front orientation. Contains Annotated.
    10 ft. Long—You can increase the weight capacity of a 10-ft. straight conveyor by adding a stand in the center.
    Conveyors
    Replacement
    Bearings
    Wd.
    Roller
    3 ft. Long
    5 ft. Long
    7 ft. Long
    10 ft. Long
    Overall
    Between
    Frame
    Spacing
    Projection
    Frame
    Ht.
    No. of Stands
    Included
    Wt. Cap. Per Lg. (No.
    of Stands Req.)
    Each
    Wt. Cap. Per Lg. (No.
    of Stands Req.)
    Each
    Wt. Cap. Per Lg. (No.
    of Stands Req.)
    Each
    Wt. Cap. Per Lg. (No.
    of Stands Req.)
    Each
    Each
    1 5/8" Dia. Stainless Steel Rollers—7/16" Hex Axle
    18"16"3"5/16"2 1/2"0235 lb/ft (2)5811K120000000235 lb/ft (2)5811K320000000120 lb/ft (2)5811K62000000000235 lb/ft (3), 60 lb/ft (2)5811K220000000002279T72000000
     
    90° Curved Conveyor
    Image of Product. Front orientation. Conveyors. Stainless Steel Roller Conveyors, 90° Curved Conveyor.
    Image of Attribute. Top orientation. Contains Annotated. Stainless Steel Roller Conveyors, 90° Curved Conveyor.
    Image of Attribute. Front orientation. Contains Annotated.
    Conveyors
    Replacement
    Bearings
    Wd.
    Overall
    Between
    Frame
    Radius
    Roller
    Projection
    Frame
    Ht.
    Wt. Cap. Per Lg. (No.
    of Stands Req.)
    No. of Stands
    Included
    Each
    Each
    1 5/8" Dia. Stainless Steel Rollers—7/16" Hex Axle
    18"16"36"5/16"2 1/2"235 lb/ft (3)05811K410000000002279T72000000
     

    High-Capacity Stainless Steel Roller Conveyors

    For more demanding shipping and assembly applications, these conveyors can carry heavy loads. They are made of corrosion-resistant stainless steel, making them suitable for washdown applications.
    Note: Weight capacities are based on an evenly distributed load with at least one stand at each end for straight conveyors, and an additional stand in the center for curved conveyors. The length of the material you’re conveying should be at least three times the roller spacing.
    Straight Conveyor
    Image of Product. Front orientation. Contains Annotated. Conveyors. High-Capacity Stainless Steel Roller Conveyors, Straight Conveyor.
    Image of Attribute. Front orientation. Contains Annotated.
    10 ft. Long—You can increase the weight capacity of a 10-ft. straight conveyor by adding a stand in the center.
    Conveyors
    Replacement Rollers
    Replacement
    Bearings
    Wd.
    Roller
    5 ft. Long
    10 ft. Long
    Roller
    Overall
    Between
    Frame
    Spacing
    Projection
    Frame
    Ht.
    No. of Stands
    Included
    Wt. Cap. Per Lg. (No.
    of Stands Req.)
    Each
    Wt. Cap. Per Lg. (No.
    of Stands Req.)
    Each
    Wd.
    Ga.
    Each
    Each
    1 3/4" Dia. Stainless Steel Rollers—7/16" Hex Axle
    18"16"3"5/16"3 1/2"0500 lb/ft (2)1315N11000000000500 lb/ft (3), 180 lb/ft (2)1315N1200000000015 1/2"111315N7100000001315N72000000
     
    90° Curved Conveyor
    Image of Product. Front orientation. Conveyors. High-Capacity Stainless Steel Roller Conveyors, 90° Curved Conveyor.
    Image of Attribute. Top orientation. Contains Annotated. High-Capacity Stainless Steel Roller Conveyors, 90° Curved Conveyor.
    Image of Attribute. Front orientation. Contains Annotated.
    Conveyors
    Replacement Rollers
    Replacement
    Bearings
    Wd.
    Roller
    Overall
    Between
    Frame
    Radius
    Roller
    Projection
    Frame
    Ht.
    Wt. Cap. Per Lg. (No.
    of Stands Req.)
    No. of Stands
    Included
    Each
    Wd.
    Ga.
    Each
    Each
    1 3/4" Dia. Stainless Steel Rollers—7/16" Hex Axle
    18"16"36"5/16"3 1/2"500 lb/ft (3)01315N2100000000015 1/2"111315N7100000001315N72000000
     

    Large-Diameter Conveyor Rollers

    Image of Product. Front orientation. Conveyor Rollers. Large-Diameter Conveyor Rollers, Hex Axle.
    Image of Product. Front orientation. Conveyor Rollers. Large-Diameter Conveyor Rollers, Round Axle.
    Image of Attribute. Front orientation. Contains Annotated.

    Hex Axle

    Round Axle

    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Hex Axle. Large-Diameter Conveyor Rollers.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Round Axle. Large-Diameter Conveyor Rollers.

    Hex Axle

    Round Axle

    Steel Rollers—Steel rollers are stronger than aluminum rollers.
    Aluminum Rollers—Aluminum rollers are lightweight and corrosion resistant.
    Sealed Bearing—Sealed bearings keep out dirt and moisture for longer life.
    Roller
    Bearing
    For Between
    Frame Wd.
    Wd.
    Ga.
    Wt. Cap.,
    lb.
    Overall
    Wd.
    Seal
    Type
    Material
    Temp. Range,
    ° F
    Each
    7/16" Hex Axle
     
    2" Dia. Steel Rollers
    16"15 9/16"1230017 1/8"—Steel-15 to 2202276T63000000
     
    2 1/2" Dia. Steel Rollers
    16"15 3/8"1428017 1/8"—Steel-15 to 2202281T1400000
     
    11/16" Hex Axle
     
    2" Dia. Steel Rollers
    16"15 5/8"1170018"ShieldedSteel-10 to 2257535N24000000
     
    2 1/2" Dia. Steel Rollers
    16"15"1175017 1/4"—Galvanized Steel0 to 1507535N15900000
     
    3" Dia. Steel Rollers
    16"14 15/16"1184518"SealedZinc-Plated Steel-4 to 2207535N59000000
     
    1 1/16" Hex Axle
     
    3 1/2" Dia. Steel Rollers
    16"15 3/8"51,10017 1/2"—Galvanized Steel-10 to 2207535N201000000
     
    1/4" Round Axle
     
    2" Dia. Steel Rollers
    16"15 1/2"1219017"—Galvanized Steel-15 to 2207535N22600000
     
    2" Dia. Aluminum Rollers
    16"15 1/2"166517"—Steel-15 to 2202276T7500000
     
    1 3/16" Round Axle
     
    4" Dia. Steel Rollers
    16"15 1/16"96,05017 9/16"SealedSteel-10 to 2257535N75000000
     

    1.9" Diameter Conveyor Rollers

    Image of Product. Front orientation. Conveyor Rollers. 1.9" Diameter Conveyor Rollers, Hex Axle.
    Image of Product. Front orientation. Conveyor Rollers. 1.9" Diameter Conveyor Rollers, Round Axle.
    Image of Attribute. Front orientation. Contains Annotated.

    Hex Axle

    Round Axle

    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Hex Axle. 1.9" Diameter Conveyor Rollers.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Round Axle. 1.9" Diameter Conveyor Rollers.

    Hex Axle

    Round Axle

    Replace damaged rollers or use multiple rollers to build a custom conveyor.
    Roller
    Each
    For Between
    Frame Wd.
    Wd.
    Ga.
    Wt. Cap.,
    lb.
    Overall
    Wd.
    Bearing Material
    Temp. Range,
    ° F
    1-24
    25-99
    100-Up
    7/16" Hex Axle
     
    1.9" Dia. Galvanized Steel Rollers
    16"15 19/32"1626517 1/4"Zinc-Plated Steel-20 to 3002277T18000000000000000000
     
    1/4" Round Axle
     
    1.9" Dia. Galvanized Steel Rollers
    16"15 9/16"1612517"Steel-15 to 2205890K312000000000000000
     
    3/8" Round Axle
     
    1.9" Dia. Galvanized Steel Rollers
    16"15 7/8"169517"Steel0 to 1502277T148000000000000000
     
    1/2" Round Axle
     
    1.9" Dia. Galvanized Steel Rollers
    16"15 19/32"1626517 1/4"Steel-20 to 1402277T119000000000000000
     

    Abrasion-Resistant Roller Conveyors

    Move delicate items, such as glass and painted parts, through your facility without scratching or denting them. Made of PVC, the rollers on these conveyors are softer and quieter than those on metal conveyors. However, they’re not as strong, so you should avoid moving heavy or sharp objects that could damage them. They convey objects with either flat or uneven bottoms, such as boxes or shipping tubes.
    These conveyors don’t run on electricity, so their rollers require momentum from gravity, a push, or a different power source to move. Since they’re not wired, they’re quick to set up and easy to maintain. This makes them handy if another conveyor unexpectedly shuts down or you need to extend an existing line in a pinch.
    Stands adjust in height.
    Note: Weight capacities are based on an evenly distributed load. The length of the material you’re conveying should be at least three times the roller spacing.
    Straight Conveyor
    Image of Product. Front orientation. Contains Annotated. Conveyors. Abrasion-Resistant Roller Conveyors, Straight Conveyor.
    Image of Product. Single-Level Stationary Stands. Front orientation. Conveyors. Abrasion-Resistant Roller Conveyors.
    Image of Attribute. Front orientation. Contains Annotated.

    Single-Level

    Stationary Stands

    Wd.
    Roller
    5 ft. Long
    10 ft. Long
    Overall
    Between
    Frame
    Spacing
    Projection
    Frame
    Ht.
    No. of Stands
    Included
    Features
    Wt. Cap. Per Lg. (No.
    of Stands Req.)
    Each
    Wt. Cap. Per Lg. (No.
    of Stands Req.)
    Each
    1.9" Dia. PVC Rollers—7/16" Hex Axle
    18"16"3"1/2"3 1/2"0Connecting Hooks400 lb/ft (2)5671N130000000300 lb/ft (3), 140 lb/ft (2)5671N14000000000
     
    Stands
    Floor
    Mounting Slot
    Ht.
    Material
    Color
    Conveyor Mounting
    Fasteners Included
    No. of Conveyor
    Mounting Holes
    Conveyor Mounting
    Hole Dia.
    Floor Mounting Fasteners
    Included
    No. of Floor
    Mounting Holes
    Lg.
    Wd.
    Each
    For 18" Overall Width
    14" to 17"Powder-Coated SteelBlueNo85/16"No41 1/4"7/16"5833K103000000
    17" to 23"Powder-Coated SteelBlueNo85/16"No41 1/4"7/16"5833K21300000
    24" to 30"Powder-Coated SteelBlueNo85/16"No41 1/4"7/16"5833K31300000
    31" to 37"Powder-Coated SteelBlueNo85/16"No41 1/4"7/16"5833K41300000
    38" to 44"Powder-Coated SteelBlueNo85/16"No41 1/4"7/16"5833K51300000
     

    Motorized Round-Groove Conveyor Rollers

    Also known as drive rollers, these connect to rollers with two grooves to power conveyors. The bearings are quiet-rolling to reduce conveyor noise and are shielded to keep out dirt and debris.
    24V DC—Continuous Duty Cycle with Up to 30 Starts and Stops per Minute
    Image of Product. Front orientation. Contains Annotated. Conveyor Rollers. Motorized Round-Groove Conveyor Rollers, Hex Axle, Galvanized Steel Rollers.
    Image of Attribute. Front orientation. Contains Annotated.

    Hex Axle

    Galvanized Steel Rollers

    Roller
    Bearing
    For Between
    Frame Wd.
    For Belt
    Dia.
    Wd.
    Ga.
    Wt. Cap.,
    lb.
    Bearing-to-Groove
    Wd.
    Groove Ctr.-to-Ctr.
    Wd.
    Overall
    Wd.
    Wire Lead
    Lg.
    Seal
    Type
    Material
    Temp. Range,
    ° F
    Features
    Includes
    Choose a Speed, fpm
    Each
    7/16" Hex Axle
     
    1.9" Dia. Galvanized Steel Rollers
    16"3/16"15.888"16702.50"1.3"17"19"ShieldedSteel32 to 100Integrated Current-Limiting Circuit, Quiet-Rolling BearingsZone Control Card4 to 70, 6 to 114, 8 to 1632250T4630000000
     

    Small-Diameter Corrosion-Resistant Conveyor Rollers

    Image of Product. Front orientation. Conveyor Rollers. Small-Diameter Corrosion-Resistant Conveyor Rollers, Hex Axle.
    Image of Product. Front orientation. Conveyor Rollers. Small-Diameter Corrosion-Resistant Conveyor Rollers, Round Axle.
    Image of Attribute. Front orientation. Contains Annotated.

    Hex Axle

    Round Axle

    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Hex Axle. Small-Diameter Corrosion-Resistant Conveyor Rollers.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Round Axle. Small-Diameter Corrosion-Resistant Conveyor Rollers.

    Hex Axle

    Round Axle

    Made from stainless steel, these rollers are suitable for washdown applications.
    Stainless Steel Bearing—Rollers with stainless steel bearings are more durable than rollers with plastic bearings.
    Rollers
    Replacement
    Bearings
    Roller
    For Between
    Frame Wd.
    Wd.
    Ga.
    Wt. Cap.,
    lb.
    Overall
    Wd.
    Bearing
    Material
    Temp. Range,
    ° F
    Each
    Each
    7/16" Hex Axle
     
    1 5/8" Dia. Stainless Steel Rollers
    16"15 3/8"1610017 1/8"Plastic30 to 1502279T170000002279T72000000
     
    1 3/4" Dia. Stainless Steel Rollers
    16"15 1/2"1130017 1/8"Stainless Steel-15 to 2401315N710000001315N7200000
     
    1/4" Round Axle
     
    3/4" Dia. Stainless Steel Rollers
    16"15 1/8"202017"Plastic30 to 1506414N24000002278T720000
     
    1 3/8" Dia. Stainless Steel Rollers
    16"15 7/8"1630017"Stainless Steel0 to 1506414N4200000———0
     

    Round-Groove Conveyor Rollers

    Image of Product. Front orientation. Contains Annotated. Conveyor Rollers. Round-Groove Conveyor Rollers, Galvanized Steel Rollers, Hex Axle, 1 Groove.
    Image of Product. Front orientation. Contains Annotated. Conveyor Rollers. Round-Groove Conveyor Rollers, Galvanized Steel Rollers, Hex Axle, 2 Grooves.
    Image of Attribute. Front orientation. Contains Annotated.

    Hex Axle

    Galvanized Steel Rollers

    1 Groove

    Hex Axle

    Galvanized Steel Rollers

    2 Grooves

    Rollers are grooved to accommodate round belts on line-shaft conveyors.
    2 Grooves—Rollers with two grooves can be used with motorized roller conveyors.
    Roller
    For Between
    Frame Wd.
    For Belt
    Dia.
    Wd.
    Ga.
    Wt. Cap.,
    lb.
    Bearing-to-Groove
    Wd.
    Groove Ctr.-to-Ctr.
    Wd.
    Overall
    Wd.
    Ball Bearing
    Material
    Temp. Range,
    ° F
    Each
    7/16" Hex Axle—1.9" Dia. Galvanized Steel Rollers
     
    1 Groove
    16"3/16"15 19/32"162652.75"—17 1/4"Steel-20 to 3502334T63000000
     
    2 Grooves
    16"3/16"15 7/8"162252.50"1.3"17"Steel-40 to 2122334T7300000
     

    Material Support Stands

    Image of Product. Style B. Front orientation. Material Support Stands. Roller Support, Tripod Stand, Style B.
    Image of Product. Style C. Front orientation. Material Support Stands. Roller Support, Pedestal Stand, Style C.
    Image of Attribute. Front orientation. Contains Annotated.

    Style B

    Style C

    Roller Support—Rollers support and help guide material into machinery.
    Roller
    Base
    Style
    Between
    Frame Wd.
    Ht.
    Wt. Cap.,
    lb.
    Dia.
    Material
    Lg.
    Wd.
    Material
    Mounting Fasteners
    Included
    Mounting
    Hole Dia.
    Features
    Each
    Roller Support
     
    Tripod Stand
    B16"23" to 39"3002"Steel21 3/8"24 1/4"SteelNo3/8"—2756T10000000
    B16"28" to 50"3002"Steel21 3/8"24 1/4"SteelNo3/8"—2756T2000000
     
    Pedestal Stand
    C16"22" to 32"5002"Galvanized Steel17"16"Steel——Leveling Feet5750K25000000
    C16"27 1/4" to 44 1/4"3502"Galvanized Steel18"18"Steel——Leveling Feet5750K15000000
    C16"28" to 45 1/2"5002"Galvanized Steel17"16"Steel——Leveling Feet5750K26000000
     

    Small-Diameter Conveyor Rollers

    Image of Product. Front orientation. Conveyor Rollers. Small-Diameter Conveyor Rollers.
    Image of Attribute. Front orientation. Contains Annotated.
    Galvanized Steel Rollers—Galvanized steel rollers are strong and have some corrosion resistance.
    Aluminum Rollers—Aluminum rollers are lightweight and more corrosion resistant than galvanized steel.
    Roller
    For Between
    Frame Wd.
    Wd.
    Ga.
    Wt. Cap.,
    lb.
    Overall
    Wd.
    Bearing
    Material
    Temp. Range,
    ° F
    Each
    1/4" Round Axle
     
    3/4" Dia. Galvanized Steel Rollers
    16"15 3/4"203016 3/4"Steel-15 to 2206409N33000000
     
    3/4" Dia. Aluminum Rollers
    16"15 3/4"202016 3/4"Steel-15 to 2206409N5500000
     
    7/8" Dia. Steel Rollers
    16"15 3/4"134516 3/4"Steel-15 to 2206409N6900000
     
    1 3/8" Dia. Galvanized Steel Rollers
    16"15 1/2"185017"Steel-5 to 4002282T1500000
     
    1 3/8" Dia. Aluminum Rollers
    16"15 1/2"184017"Steel-15 to 2202282T3500000
     

    Conveyor Stops

    Add a stop on a conveyor to control product flow and allow for accumulation.
    Bolt On
    Image of Product. Front orientation. Conveyor Stops. Bolt On.
    Image of Attribute. Front orientation. Contains Annotated.
    Bolt-on stops attach to the conveyor frame.
    For Between
    Frame Wd.
    For Overall
    Wd.
    Lg.
    Wd.
    Ht.
    Ga.
    Mounting Fasteners
    Included
    No. of Mounting
    Holes
    Mounting
    Hole Dia.
    Mounting Hole
    Ctr.-to-Ctr.
    Color
    Each
    Powder-Coated Steel
    16"18"1 1/2"18"1 1/2"10Yes21/4"17"Blue5899K76000000
     
    Hook On
    Image of Product. Front orientation. Conveyor Stops. Hook On.
    Image of Attribute. Front orientation. Contains Annotated.
    Hook-on stops slide over a roller to create a barrier.
    For Between
    Frame Wd.
    For Overall
    Wd.
    Lg.
    Wd.
    Ht.
    Ga.
    For Max.
    Roller Dia.
    Color
    Each
    Powder-Coated Steel
    16"18"12"15 1/2"3"121.9"Blue5899K66000000
     

    1.9" Diameter Abrasion-Resistant Conveyor Rollers

    Image of Product. Front orientation. Conveyor Rollers. 1.9" Diameter Abrasion-Resistant Conveyor Rollers, Hex Axle, PVC Rollers.
    Image of Product. Front orientation. Conveyor Rollers. 1.9" Diameter Abrasion-Resistant Conveyor Rollers, Hex Axle, Polyethylene-Coated Steel Rollers.

    Hex Axle

    PVC Rollers

    Hex Axle,

    Polyethylene-Coated

    Steel Rollers

    Image of Product. Front orientation. Conveyor Rollers. 1.9" Diameter Abrasion-Resistant Conveyor Rollers, Hex Axle, Polyurethane-Coated Steel Rollers.
    Image of Attribute. Front orientation. Contains Annotated.

    Hex Axle,

    Polyurethane-Coated Steel

    Rollers

    The nonmarring roller surface protects material better than all-metal rollers.
    PVC Rollers—PVC rollers are for light duty applications.
    Polyethylene-Coated Steel Rollers—Polyethylene-coated rollers are nonstick.
    Polyurethane-Coated Steel Rollers—Polyurethane-coated rollers are the most abrasion resistant.
    Quiet-Rolling Bearings—Rollers with quiet-rolling bearings have maintenance-free, precision bearings to reduce conveyor noise.
    Roller
    For Between
    Frame Wd.
    Wd.
    Thk.
    Ga.
    Coating
    Thk.
    Wt. Cap.,
    lb.
    Overall
    Wd.
    Bearing
    Material
    Temp. Range,
    ° F
    Features
    Each
    7/16" Hex Axle
     
    1.9" Dia. PVC Rollers—Gray
    16"15 7/8"1/8"——4017"Plastic14 to 175—2255T37000000
     
    1.9" Dia. Polyethylene-Coated Steel Rollers—White
    16"15 3/8"—160.08"15017"Plastic10 to 150Quiet-Rolling Bearings2210T3100000
     
    1.9" Dia. Polyurethane-Coated Steel Rollers—Orange
    16"15 1/2"—160.13"25017 1/8"Steel-20 to 150—2255T14700000
     
    1.9" Dia. Polyurethane-Coated Steel Rollers—Black
    16"15 3/8"—160.08"15017"Plastic10 to 150Quiet-Rolling Bearings2446T7100000
     

    1.9" Diameter Motorized Conveyor Rollers

    Add power to a gravity conveyor or build a custom powered conveyor. Rollers can be hardwired to operate in either direction. They have shielded bearings to keep out dust and debris.
    120V AC (Single-Phase Motor)—Continuous Duty
    Image of Product. Front orientation. Conveyor Rollers. 1.9" Diameter Motorized Conveyor Rollers.
    Image of Attribute. Front orientation. Contains Annotated.
    Roller
    Bearing
    For Between
    Frame Wd.
    Wd.
    Ga.
    Wt. Cap.,
    lb.
    Overall
    Wd.
    Wire Lead
    Lg.
    Seal
    Type
    Material
    Temp. Range,
    ° F
    Includes
    Choose a Speed, fpm
    Each
    7/16" Hex Axle
     
    1.9" Dia. Zinc-Plated Steel Rollers
    16"15 3/8"1714017 1/4"2"ShieldedZinc-Plated Steel15 to 100Terminal Block33, 53, 671711N220000000
     

    Small-Diameter Abrasion-Resistant Conveyor Rollers

    Image of Product. Front orientation. Conveyor Rollers. Small-Diameter Abrasion-Resistant Conveyor Rollers.
    Image of Attribute. Front orientation. Contains Annotated.
    These nonmarring, nonmarking PVC plastic rollers protect material better than all-metal rollers.
    Roller
    For Between
    Frame Wd.
    Wd.
    Thk.
    Wt. Cap.,
    lb.
    Overall
    Wd.
    Bearing
    Material
    Temp. Range,
    ° F
    Each
    1/4" Round Axle
     
    0.78" Dia. PVC Rollers—Gray
    16"15 1/8"1/16"1017"Plastic30 to 1502297T23000000
     

    Tapered Round-Groove Conveyor Rollers

    Image of Product. Front orientation. Contains Annotated. Conveyor Rollers. Tapered Round-Groove Conveyor Rollers.
    Image of Attribute. Front orientation. Contains Annotated.
    Rollers taper from approximately 2 1/2" diameter on the outside to 1 5/8" on the inside so packages maintain their orientation on line-shaft conveyors.
    Roller
    For Between
    Frame Wd.
    For Belt
    Dia.
    Wd.
    Ga.
    Wt. Cap.,
    lb.
    Bearing-to-Groove
    Wd.
    Groove Ctr.-to-Ctr.
    Wd.
    Overall
    Wd.
    Bearing
    Material
    Temp. Range,
    ° F
    Each
    7/16" Hex Axle
     
    1 5/8" to 2 1/2" Dia. Galvanized Steel Rollers
    16"3/16"15 5/16"142502.80"1"17"Steel-25 to 2502312T530000000
     

    1.9" Diameter V-Groove Conveyor Rollers

    Image of Product. Front orientation. Conveyor Rollers. 1.9" Diameter V-Groove Conveyor Rollers.
    Image of Attribute. Front orientation. Contains Annotated.
    Also known as Poly-V rollers, these are designed for use with V-belts. They have sealed bearings to keep out dirt and moisture.
    Roller
    Bearing
    For Between
    Frame Wd.
    For Belt
    Trade Size
    Wd.
    Ga.
    Wt. Cap.,
    lb.
    Overall
    Wd.
    Seal
    Type
    Material
    Hub Dia.,
    mm
    For No. of
    Belt Bands
    Temp. Range,
    ° F
    Each
    7/16" Hex Axle
     
    1.9" Dia. Galvanized Steel Rollers
    16"J
    		14 1/4"1621017"SealedSteel432, 3, 410 to 15012975N5000000
     

    1.9" Diameter Corrosion-Resistant Conveyor Rollers

    Image of Product. Front orientation. Conveyor Rollers. 1.9" Diameter Corrosion-Resistant Conveyor Rollers.
    Image of Attribute. Front orientation. Contains Annotated.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Hex Axle. 1.9" Diameter Corrosion-Resistant Conveyor Rollers.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Round Axle. 1.9" Diameter Corrosion-Resistant Conveyor Rollers.

    Hex Axle

    Round Axle

    Made from stainless steel, these rollers are suitable for washdown applications.
    Sealed Bearing—Sealed bearings keep out dirt and moisture for longer life.
    Roller
    Bearing
    For Between
    Frame Wd.
    Wd.
    Ga.
    Wt. Cap.,
    lb.
    Overall
    Wd.
    Seal
    Type
    Material
    Temp. Range,
    ° F
    Each
    7/16" Hex Axle
     
    1.9" Dia. Stainless Steel Rollers
    16"15 3/8"1617017"SealedPlastic10 to 1502247T8000000
     
    1/4" Round Axle
     
    1.9" Dia. Stainless Steel Rollers
    16"15 3/8"162517"SealedPlastic10 to 1502247T7600000
     

    Tapered Conveyor Rollers for Curves

    Image of Product. Front orientation. Conveyor Rollers. Tapered Conveyor Rollers for Curves.
    Image of Attribute. Front orientation. Contains Annotated.
    Improve tracking on curved sections of 1.9" diameter conveyors. Rollers taper from approximately 2 1/2" diameter on the outside to 1 5/8" on the inside.
    Roller
    For Between
    Frame Wd.
    Wd.
    Ga.
    Wt. Cap.,
    lb.
    Overall
    Wd.
    Bearing
    Material
    Temp. Range,
    ° F
    Each
    7/16" Hex Axle
     
    1 5/8" to 2 1/2" Dia. Galvanized Steel Rollers
    16"15 5/16"1425017"Steel-25 to 2502245T20000000
     

    1.9" Diameter Dent-Resistant Conveyor Rollers

    Image of Product. Front orientation. Conveyor Rollers. 1.9" Diameter Dent-Resistant Conveyor Rollers.
    Image of Attribute. Front orientation. Contains Annotated.
    Rollers are made from thick, 12-ga. steel so they're less likely to dent than standard 16-ga. rollers.
    Roller
    For Between
    Frame Wd.
    Wd.
    Ga.
    Wt. Cap.,
    lb.
    Overall
    Wd.
    Bearing Material
    Temp. Range,
    ° F
    Each
    7/16" Hex Axle
     
    1.9" Dia. Steel Rollers
    16"15 7/8"1237517"Zinc-Plated Steel-20 to 2502565T51000000
     

    1.9" Diameter Quiet-Rolling Conveyor Rollers

    Image of Product. Front orientation. Conveyor Rollers. 1.9" Diameter Quiet-Rolling Conveyor Rollers.
    Image of Attribute. Front orientation. Contains Annotated.
    Rollers have maintenance-free, precision bearings to reduce conveyor noise.
    Roller
    For Between
    Frame Wd.
    Wd.
    Ga.
    Wt. Cap.,
    lb.
    Overall
    Wd.
    Bearing
    Material
    Temp. Range,
    ° F
    Features
    Each
    7/16" Hex Axle
     
    1.9" Dia. Galvanized Steel Rollers
    16"15 3/32"1624017 1/4"Plastic-20 to 165Quiet-Rolling Bearings2263T6000000
     

    One-Way Conveyor Rollers for Inclines

    Image of Product. Front orientation. Conveyor Rollers. One-Way Conveyor Rollers for Inclines.
    Image of Attribute. Front orientation. Contains Annotated.
    Rollers move in one direction so they won't roll back when idle, keeping packages in place. Sealed bearings keep out dirt and moisture.
    Roller
    Bearing
    For Between
    Frame Wd.
    Wd.
    Ga.
    Wt. Cap.,
    lb.
    Overall
    Wd.
    Seal
    Type
    Material
    Temp. Range,
    ° F
    Each
    7/16" Hex Axle
     
    1.9" Dia. Galvanized Steel Rollers
    16"15 1/2"1626017"SealedZinc-Plated Steel10 to 1501300N40000000
     
    back to top