Roller Conveyors
Mix and match conveyors and stands to design a conveyor system that moves parts exactly where they need to go. These conveyors have rollers that transfer items with flat or uneven bottoms, such as boxes or shipping tubes. They’re more durable and carry heavier loads than belt and skate wheel conveyors.
These conveyors don’t run on electricity, so their rollers require momentum from gravity, a push, or a powered conveyor to move. Since they’re not wired, they’re quick to set up and easy to maintain. This makes them handy if another conveyor unexpectedly shuts down or you need to extend an existing line in a pinch.
Curved and straight conveyors have connecting hooks to attach conveyor sections together.
Galvanized steel conveyors carry heavier loads than aluminum conveyors. Aluminum conveyors are roughly half the weight of steel conveyors, so they’re easier to install.
Note: Capacities are based on an evenly distributed load. The length of the material you’re conveying should be at least three times the roller spacing.
Wd. | |||||||
|---|---|---|---|---|---|---|---|
| O'all | Between Frame | Lg., ft. | Frame Ht. | Cap. (No. of Stands Required) | No. of Stands Included | Each | |
1 1/2" Roller Spacing | |||||||
1 3/8" Dia. Galvanized Steel Rollers—1/4" Round Axle | |||||||
| 26" | 24" | 5 | 2 1/2" | 200 lbs./ft. (2) | None | 0000000 | 0000000 |
| 26" | 24" | 10 | 2 1/2" | 50 lbs./ft. (2), 200 lbs./ft. (3) | None | 0000000 | 00000000 |
1 3/8" Dia. Aluminum Rollers—1/4" Round Axle | |||||||
| 26" | 24" | 5 | 2 1/2" | 100 lbs./ft. (2) | None | 0000000 | 000000 |
| 26" | 24" | 10 | 2 1/2" | 30 lbs./ft. (2), 100 lbs./ft. (3) | None | 0000000 | 00000000 |
3" Roller Spacing | |||||||
1 3/8" Dia. Galvanized Steel Rollers—1/4" Round Axle | |||||||
| 26" | 24" | 5 | 2 1/2" | 200 lbs./ft. (2) | None | 0000000 | 000000 |
| 26" | 24" | 10 | 2 1/2" | 50 lbs./ft. (2), 200 lbs./ft. (3) | None | 0000000 | 000000 |
1 3/8" Dia. Aluminum Rollers—1/4" Round Axle | |||||||
| 26" | 24" | 5 | 2 1/2" | 100 lbs./ft. (2) | None | 0000000 | 000000 |
| 26" | 24" | 10 | 2 1/2" | 30 lbs./ft. (2), 100 lbs./ft. (3) | None | 0000000 | 000000 |
1.9" Dia. Galvanized Steel Rollers—1/4" Round Axle | |||||||
| 26" | 24" | 5 | 2 1/2" | 200 lbs./ft. (2) | None | 0000000 | 000000 |
| 26" | 24" | 10 | 2 1/2" | 50 lbs./ft. (2), 200 lbs./ft. (3) | None | 0000000 | 000000 |
4 1/2" Roller Spacing | |||||||
1.9" Dia. Galvanized Steel Rollers—1/4" Round Axle | |||||||
| 26" | 24" | 5 | 2 1/2" | 200 lbs./ft. (2) | None | 0000000 | 000000 |
| 26" | 24" | 10 | 2 1/2" | 50 lbs./ft. (2), 200 lbs./ft. (3) | None | 0000000 | 000000 |
6" Roller Spacing | |||||||
1.9" Dia. Galvanized Steel Rollers—1/4" Round Axle | |||||||
| 26" | 24" | 5 | 2 1/2" | 200 lbs./ft. (2) | None | 0000000 | 000000 |
| 26" | 24" | 10 | 2 1/2" | 50 lbs./ft. (2), 200 lbs./ft. (3) | None | 0000000 | 000000 |
Wd. | |||||||
|---|---|---|---|---|---|---|---|
| O'all | Between Frame | Radius | Frame Ht. | Cap. (No. of Stands Required) | No. of Stands Included | Each | |
1 3/8" Dia. Galvanized Steel Rollers—1/4" Round Axle | |||||||
| 26" | 24" | 36" | 2 1/2" | 200 lbs./ft. (3) | None | 0000000 | 0000000 |
1 3/8" Dia. Aluminum Rollers—1/4" Round Axle | |||||||
| 26" | 24" | 36" | 2 1/2" | 100 lbs./ft. (3) | None | 0000000 | 000000 |
1.9" Dia. Galvanized Steel Rollers—1/4" Round Axle | |||||||
| 26" | 24" | 36" | 2 1/2" | 200 lbs./ft. (3) | None | 0000000 | 000000 |
Wd. | |||||||
|---|---|---|---|---|---|---|---|
| O'all | Between Frame | Radius | Frame Ht. | Cap. (No. of Stands Required) | No. of Stands Included | Each | |
1.9" Dia. Galvanized Steel Rollers—1/4" Round Axle | |||||||
| 26" | 24" | 36" | 2 1/2" | 200 lbs./ft. (3) | None | 0000000 | 0000000 |
Stainless Steel Roller Conveyors
Conveyors are made of corrosion-resistant stainless steel, making them suitable for washdown applications.
Note: Capacities are based on an evenly distributed load with at least one stand at each end for straight conveyors, and an additional stand in the center for curved conveyors. You can increase the capacity of a 10-ft. straight conveyor by adding a stand in the center. The length of the material you’re conveying should be at least three times the roller spacing.
Wd. | Roller | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| O'all | Between Frame | Lg., ft. | Spacing | Projection | Frame Ht. | Cap. (No. of Stands Required) | No. of Stands Included | Each | |
1 5/8" Dia. Stainless Steel Rollers—7/16" Hex Axle | |||||||||
| 26" | 24" | 5 | 3" | 5/16" | 2 1/2" | 235 lbs./ft. (2) | None | 0000000 | 000000000 |
| 26" | 24" | 10 | 3" | 5/16" | 2 1/2" | 235 lbs./ft. (3), 60 lbs./ft. (2) | None | 0000000 | 00000000 |
| Replacement Bearing | 0000000 | Each | 000000 |
Flexible Roller Conveyors
Expand, curve, and retract the accordion-style frame to position these conveyors wherever you need them. Snake them around obstacles in cramped areas, bend them into a horseshoe to connect two trailers, or stretch them out to extend an existing line. When they’re not in use, retract these conveyors down to a fraction of their length. Their rollers are designed to smoothly transfer flat objects or ones with uneven bottoms. Shipping tubes, drums, and pails are less likely to get stuck in between rollers than between skate wheels.
Note: Capacities are based on an evenly distributed load. The length of the material you're conveying should be at least three times the roller spacing.
Wd. | Roller | |||||||
|---|---|---|---|---|---|---|---|---|
| O'all | Between Frame | Spacing | Projection | O'all Ht. | Cap., lbs./ft. | Features | Each | |
3'5" to 12'10" Lg. | ||||||||
1 3/8" Dia. Zinc-Plated Steel Rollers—5/16" Round Axle | ||||||||
| 27" | 24" | 5 1/4" | 1/4" | 28"-44" | 200 | Connecting Hooks, Handle, Package Stop | 0000000 | 000000000 |
6'7" to 24'8" Lg. | ||||||||
1 3/8" Dia. Zinc-Plated Steel Rollers—5/16" Round Axle | ||||||||
| 27" | 24" | 5 1/4" | 1/4" | 28"-44" | 200 | Connecting Hooks, Handle, Package Stop | 0000000 | 00000000 |
1.9" Diameter Conveyor Rollers
Replace damaged rollers or use multiple rollers to build a custom conveyor.
Roller | Each | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | Overall Wd. | Temp. Range, °F | 1-24 | 25-99 | 100-Up | |
7/16" Hex Axle | |||||||||
1.9" Dia. Galvanized Steel Roller | |||||||||
| 24" | 23 19/32" | 16 | 265 | 25 1/4" | -20° to 300° | 0000000 | 000000 | 000000 | 000000 |
1/4" Round Axle | |||||||||
1.9" Dia. Galvanized Steel Roller | |||||||||
| 24" | 23 9/16" | 16 | 125 | 25" | -15° to 220° | 00000000 | 00000 | 00000 | 00000 |
3/8" Round Axle | |||||||||
1.9" Dia. Galvanized Steel Roller | |||||||||
| 24" | 23 7/8" | 16 | 60 | 25" | 0° to 150° | 00000000 | 00000 | 00000 | 00000 |
1/2" Round Axle | |||||||||
1.9" Dia. Galvanized Steel Roller | |||||||||
| 24" | 23 19/32" | 16 | 265 | 25 1/4" | -20° to 140° | 00000000 | 00000 | 00000 | 00000 |
Large-Diameter Conveyor Rollers
Steel rollers are stronger than aluminum rollers.
Aluminum rollers are lightweight and corrosion resistant.
Sealed bearings keep out dirt and moisture for longer life.
Roller | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | Overall Wd. | Bearing Seal Type | Temp. Range, °F | Each | |
7/16" Hex Axle | ||||||||
2" Dia. Steel Roller | ||||||||
| 24" | 23 9/16" | 12 | 300 | 25 1/8" | __ | -15° to 220° | 0000000 | 000000 |
2 1/2" Dia. Steel Roller | ||||||||
| 24" | 23 3/8" | 14 | 280 | 25 1/8" | __ | -15° to 220° | 00000000 | 00000 |
11/16" Hex Axle | ||||||||
2" Dia. Steel Roller | ||||||||
| 24" | 23 5/8" | 11 | 700 | 26" | Shielded | -10° to 225° | 0000000 | 000000 |
2 1/2" Dia. Steel Roller | ||||||||
| 24" | 23 7/16" | 11 | 640 | 26" | __ | -40° to 300° | 0000000 | 00000 |
3" Dia. Steel Roller | ||||||||
| 24" | 22 15/16" | 11 | 840 | 26" | Sealed | -4° to 220° | 0000000 | 000000 |
1 1/16" Hex Axle | ||||||||
3 1/2" Dia. Steel Roller | ||||||||
| 24" | 23 3/8" | 5 | 1,100 | 25 1/2" | __ | -10° to 220° | 00000000 | 000000 |
1/4" Round Axle | ||||||||
2" Dia. Steel Roller | ||||||||
| 24" | 23 1/2" | 12 | 190 | 25" | __ | -15° to 220° | 00000000 | 00000 |
2" Dia. Aluminum Roller | ||||||||
| 24" | 23 1/2" | 16 | 65 | 25" | __ | -15° to 220° | 00000000 | 00000 |
1 3/16" Round Axle | ||||||||
4" Dia. Steel Roller | ||||||||
| 24" | 23 1/16" | 9 | 6,045 | 25 9/16" | Sealed | -10° to 225° | 0000000 | 000000 |
Small-Diameter Conveyor Rollers
Galvanized steel rollers are strong and have some corrosion resistance. Aluminum rollers are lightweight and more corrosion resistant than galvanized steel.
Roller | |||||||
|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | Overall Wd. | Temp. Range, °F | Each | |
1/4" Round Axle | |||||||
3/4" Dia. Galvanized Steel Roller | |||||||
| 24" | 23 3/4" | 20 | 30 | 24 3/4" | -15° to 220° | 0000000 | 000000 |
3/4" Dia. Aluminum Roller | |||||||
| 24" | 23 3/4" | 20 | 20 | 24 3/4" | -15° to 220° | 0000000 | 00000 |
7/8" Dia. Steel Roller | |||||||
| 24" | 23 3/4" | 13 | 45 | 24 3/4" | -15° to 220° | 0000000 | 00000 |
1 3/8" Dia. Galvanized Steel Roller | |||||||
| 24" | 23 1/2" | 18 | 30 | 25" | -5° to 400° | 0000000 | 00000 |
1 3/8" Dia. Aluminum Roller | |||||||
| 24" | 23 1/2" | 18 | 40 | 25" | -15° to 220° | 00000000 | 00000 |
Small-Diameter Corrosion-Resistant Conveyor Rollers
Made from stainless steel, these rollers are suitable for washdown applications.
Rollers with stainless steel bearings are more durable than rollers with plastic bearings.
Conveyor Rollers | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Roller | Replacement Bearings | |||||||||
| For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | Overall Wd. | Bearing Material | Temp. Range, °F | Each | Each | ||
5/16" Hex Axle | ||||||||||
1 3/8" Dia. Stainless Steel Roller | ||||||||||
| 24" | 23 1/2" | 16 | 75 | 25" | Stainless Steel | -20° to 140° | 0000000 | 0000000 | 0000000 | 000000 |
7/16" Hex Axle | ||||||||||
1 5/8" Dia. Stainless Steel Roller | ||||||||||
| 24" | 23 3/8" | 16 | 100 | 25 1/8" | Plastic | 30° to 150° | 0000000 | 00000 | 0000000 | 00000 |
1/4" Round Axle | ||||||||||
3/4" Dia. Stainless Steel Roller | ||||||||||
| 24" | 23 1/8" | 20 | 20 | 25" | Plastic | 30° to 150° | 0000000 | 00000 | 0000000 | 0000 |
1 3/8" Dia. Stainless Steel Roller | ||||||||||
| 24" | 23 7/8" | 16 | 190 | 25" | Stainless Steel | 0° to 150° | 0000000 | 00000 | 000000 | 00 |
1.9" Diameter Corrosion-Resistant Conveyor Rollers
Made from stainless steel, these rollers are suitable for washdown applications.
Sealed bearings keep out dirt and moisture for longer life.
1.9" Diameter Abrasion-Resistant Conveyor Rollers
The nonmarring roller surface protects material better than all-metal rollers.
PVC rollers are for light duty applications.
Polyethylene-coated rollers are nonstick.
Polyurethane-coated rollers are the most abrasion resistant.
Rollers with quiet-rolling bearings have maintenance-free, precision bearings to reduce conveyor noise.
Roller | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | Wd. | Thick. | Gauge | Coating Thick. | Cap., lbs. | Overall Wd. | Temp. Range, °F | Features | Each | |
7/16" Hex Axle | ||||||||||
1.9" Dia. PVC Plastic Rollers—Gray | ||||||||||
| 24" | 23 7/8" | 1/8" | __ | __ | 20 | 25" | 14° to 175° | __ | 0000000 | 000000 |
1.9" Dia. Polyethylene-Coated Steel Rollers—White | ||||||||||
| 24" | 23 3/8" | __ | 16 | 0.08" | 125 | 25" | 10° to 150° | Quiet-Rolling Bearings | 0000000 | 00000 |
1.9" Dia. Polyurethane-Coated Steel Rollers—Orange | ||||||||||
| 24" | 23 1/2" | __ | 16 | 0.13" | 250 | 25 1/8" | -20° to 150° | __ | 00000000 | 000000 |
1.9" Dia. Polyurethane-Coated Steel Rollers—Black | ||||||||||
| 24" | 23 3/8" | __ | 16 | 0.08" | 125 | 25" | 10° to 150° | Quiet-Rolling Bearings | 0000000 | 000000 |
1.9" Diameter Dent-Resistant Conveyor Rollers
Rollers are made from thick, 12-ga. steel so they're less likely to dent than standard 16-ga. rollers.
Roller | |||||||
|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | Overall Wd. | Temp. Range, °F | Each | |
7/16" Hex Axle | |||||||
1.9" Dia. Steel Roller | |||||||
| 24" | 23 7/8" | 12 | 240 | 25" | -20° to 250° | 0000000 | 000000 |
1.9" Diameter Quiet-Rolling Conveyor Rollers
Rollers have maintenance-free, precision bearings to reduce conveyor noise.
Roller | |||||||
|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | Overall Wd. | Temp. Range, °F | Each | |
7/16" Hex Axle | |||||||
1.9" Dia. Galvanized Steel Roller | |||||||
| 24" | 23 3/32" | 16 | 155 | 25 1/4" | -20° to 165° | 0000000 | 000000 |
Tapered Conveyor Rollers for Curves
Improve tracking on curved sections of 1.9" diameter conveyors. Rollers taper from approximately 2 1/2" diameter on the outside to 1 5/8" on the inside.
Roller | |||||||
|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | Overall Wd. | Temp. Range, °F | Each | |
7/16" Hex Axle | |||||||
1 5/8"-2 1/2" Dia. Galvanized Steel Roller | |||||||
| 24" | 23 5/16" | 14 | 250 | 25" | -25° to 250° | 0000000 | 0000000 |
One-Way Conveyor Rollers for Inclines
Rollers move in one direction so they won't roll back when idle, keeping packages in place. Sealed bearings keep out dirt and moisture.
Roller | |||||||
|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | Overall Wd. | Temp. Range, °F | Each | |
7/16" Hex Axle | |||||||
1.9" Dia. Galvanized Steel | |||||||
| 24" | 23 1/2" | 16 | 155 | 25" | 10° to 150° | 000000 | 0000000 |
Round-Groove Conveyor Rollers
Rollers are grooved to accommodate round belts on line-shaft conveyors.
Rollers with two grooves can be used with motorized roller conveyors.
Roller | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Between Frame Wd. | For Belt Dia. | Wd. | Gauge | Cap., lbs. | Bearing-to-Groove Wd. | Groove Ctr.-to-Ctr. Wd. | O'all Wd. | Temp. Range, °F | Each | |
7/16" Hex Axle—1.9" Dia. Galvanized Steel Roller | ||||||||||
2 Groove | ||||||||||
| 24" | 3/16" | 24" | 16 | 265 | 2.75" | 1.0" | 25 1/4" | -20° to 350° | 0000000 | 000000 |