Totally Enclosed Fan Cooled (TEFC) Conveyors

Filter by

System of Measurement

Length

Belt Width

Voltage

Overall Width

Between Frame Width

Belt Surface Type

Speed

Component

Overall Height

Reversible

Material

Roller Spacing

Electrical Phase

Weight Capacity

Number of Stands Required

Frame Width

Weight Capacity per Length

Roller Diameter

Power

Motor Enclosure Type

Totally Enclosed Fan-Cooled (TEFC)

Totally Enclosed Nonventilated (TENV)

RoHS

Compliant

Not Compliant

Export Control Classification Number (ECCN)

EAR99

REACH

Compliant

Not Compliant

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Exempt

Forward

How can we improve?

238 Products

Motorized Roller Conveyors

Also known as line-shaft conveyors, these conveyors are driven by a drive shaft and round belts. Unlike belt conveyors, these have built-in accumulation, so packages can build up without crashing into one another or falling off the conveyor. The rollers are designed to smoothly transfer totes, packages, and other lightweight material. Shipping tubes, drums, and pails are less likely to get stuck in between rollers than between skate wheels.

Mix and match stands and conveyors to form straight lines, curve around obstacles, or create inclines. Only straight conveyor sections contain a motor, but they can power up to 60 ft. of conveyor extensions on either side. The motor can be reversed to send material in either direction.

Fixed-speed conveyors travel at 60 fpm, a common industry rate, to move material. Those with three-phase motors balance power more evenly than single-phase motors, so they can handle heavier loads. While a conveyor with a single-phase motor may lag when a heavy load reaches the conveyor, a conveyor with a three-phase motor will continue smoothly.

Note: Capacities are based on an evenly distributed load. The length of the material you’re conveying should be at least three times the roller spacing.

Fixed-Speed Straight Conveyors

Wd.		Roller		Ht.					No. of Stands			3 ft. Lg.
O'all	Between Frame	Spacing	Projection	Frame	O'all	Power, hp	Speed, fpm	Cap., lbs./ft.	Required	Included	Features		Each
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle
120V AC—Single Phase (Plug In)
16"	13"	3"	1/4"	5 1/2"	36"-48"	1/2	60	40	2	2	Connecting Plates, On/Off Switch	5898K301	000000000
17"	14"	3"	1/4"	5 1/2"	36"-48"	1/2	60	40	2	2	Connecting Plates, On/Off Switch	5898K302	00000000
19"	16"	3"	1/4"	5 1/2"	36"-48"	1/2	60	40	2	2	Connecting Plates, On/Off Switch	5898K303	00000000
21"	18"	3"	1/4"	5 1/2"	36"-48"	1/2	60	40	2	2	Connecting Plates, On/Off Switch	5898K304	00000000
25"	22"	3"	1/4"	5 1/2"	36"-48"	1/2	60	40	2	2	Connecting Plates, On/Off Switch	5898K305	00000000
29"	26"	3"	1/4"	5 1/2"	36"-48"	1/2	60	40	2	2	Connecting Plates, On/Off Switch	5898K306	00000000
31"	28"	3"	1/4"	5 1/2"	36"-48"	1/2	60	40	2	2	Connecting Plates, On/Off Switch	5898K307	00000000
35"	32"	3"	1/4"	5 1/2"	36"-48"	1/2	60	40	2	2	Connecting Plates, On/Off Switch	5898K308	00000000
41"	38"	3"	1/4"	5 1/2"	36"-48"	1/2	60	40	2	2	Connecting Plates, On/Off Switch	5898K309	00000000
240/460V AC—Three Phase (Hardwire)
16"	13"	3"	1/4"	5 1/2"	36"-48"	1/2	60	40	2	2	Connecting Plates	5898K11	00000000
17"	14"	3"	1/4"	5 1/2"	36"-48"	1/2	60	40	2	2	Connecting Plates	5898K201	00000000
19"	16"	3"	1/4"	5 1/2"	36"-48"	1/2	60	40	2	2	Connecting Plates	5898K21	00000000
21"	18"	3"	1/4"	5 1/2"	36"-48"	1/2	60	40	2	2	Connecting Plates	5898K202	00000000
25"	22"	3"	1/4"	5 1/2"	36"-48"	1/2	60	40	2	2	Connecting Plates	5898K31	00000000
29"	26"	3"	1/4"	5 1/2"	36"-48"	1/2	60	40	2	2	Connecting Plates	5898K203	00000000
31"	28"	3"	1/4"	5 1/2"	36"-48"	1/2	60	40	2	2	Connecting Plates	5898K204	00000000
35"	32"	3"	1/4"	5 1/2"	36"-48"	1/2	60	40	2	2	Connecting Plates	5898K81	00000000
41"	38"	3"	1/4"	5 1/2"	36"-48"	1/2	60	40	2	2	Connecting Plates	5898K205	00000000

Replacement Stands

			Conveyor Mount. Slot
Ht.	Conveyor Mount. Fasteners Included	No. of Conveyor Mount. Holes	Lg.	Wd.	Mount. Hole Ctr.-to-Ctr.	Floor Mount. Fasteners Included	No. of Floor Mount. Holes	Floor Mount. Hole Dia.		Each
For 16" Overall Wd.
30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K781	0000000
For 17" Overall Wd.
30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K788	000000
For 19" Overall Wd.
30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K782	000000
For 21" Overall Wd.
30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K789	000000
For 25" Overall Wd.
30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K784	000000
For 29" Overall Wd.
30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K791	000000
For 31" Overall Wd.
30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K792	000000
For 35" Overall Wd.
30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K787	000000
For 41" Overall Wd.
30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K793	000000

Replacement Parts

Coupling Chain

Drive Belt

Drive Spool

Drive Spool Retaining Clip

Component		Each
Coupling Chain	5898K73	000000
Drive Belt for Straight Section	5898K912	0000
Drive Spool	5898K71	0000
Drive Spool Retaining Clip	5898K72	0000
Roller Drive Belt	5898K97	0000

Heavy Duty Motorized Roller Conveyors

Move pallets, drums, racks, and other heavy items around your facility with these conveyors. Also known as chain-driven live roller conveyors, they have sprocketed rollers connected to a drive chain to move heavy loads. The sprockets minimize slipping, so these conveyors can smoothly move loads that are four times heavier than what you can move with our standard motorized roller conveyors. All have an adjustable speed range that goes as slow as 15 fpm, so you can slow material down to perform quality checks.

Straight Conveyors

Wd.										No. of Stands
O'all	Between Frame	Lg., ft.	ANSI Chain Number	Frame Ht.	Voltage	Motor Phase	Power, hp	Speed Range, fpm	Cap., lbs./ft.	Required	Included	Features		Each
4 1/2" Roller Spacing
2 1/2" Dia. Steel Rollers—11/16" Hex Axle
60 1/4"	43"	5	60	6"	120V AC	Three	1 1/2	15-60	290	2	None	Chain Guard, On/Off Switch	5886N11	000000000
60 1/4"	43"	10	60	6"	120V AC	Three	1 1/2	15-60	290	3	None	Chain Guard, On/Off Switch	5886N12	00000000
68 1/4"	51"	5	60	6"	120V AC	Three	1 1/2	15-60	290	2	None	Chain Guard, On/Off Switch	5886N15	00000000
68 1/4"	51"	10	60	6"	120V AC	Three	1 1/2	15-60	290	3	None	Chain Guard, On/Off Switch	5886N16	00000000
6" Roller Spacing
2 1/2" Dia. Steel Rollers—11/16" Hex Axle
60 1/4"	43"	5	60	6"	120V AC	Three	1 1/2	15-60	290	2	None	Chain Guard, On/Off Switch	5886N13	00000000
60 1/4"	43"	10	60	6"	120V AC	Three	1 1/2	15-60	290	3	None	Chain Guard, On/Off Switch	5886N14	00000000
68 1/4"	51"	5	60	6"	120V AC	Three	1 1/2	15-60	290	2	None	Chain Guard, On/Off Switch	5886N17	00000000
68 1/4"	51"	10	60	6"	120V AC	Three	1 1/2	15-60	290	3	None	Chain Guard, On/Off Switch	5886N18	00000000

Replacement Motors

Three Phase
Motor Enclosure Type	Power, hp	Voltage		Each
Totally Enclosed Fan Cooled (TEFC)	1 1/2	240V AC, 460V AC	5886N901	000000000

Replacement Speed Controllers

Features		Each
On/Off Switch	5886N902	000000000

Replacement Drive Chains

Steel
For Roller Spacing	ANSI Chain Number	Lg., ft.		Each
4 1/2"	60	1 3/4	5886N903	000000
6"	60	2	5886N904	00000

Belt Conveyors

Non-Reversible Conveyor

Reversible Conveyor

Move small, loose, and irregularly shaped material that might fall through or shift around roller or skate wheel conveyors. Material remains in the same location on the belt as it travels, making these conveyors ideal for inspecting products in an assembly line. These conveyors ship as sub-assemblies that require final assembly.

Reversible conveyors move material forward and back in applications such as loading and unloading trucks or returning empty containers back down the line.

Fixed-speed conveyors travel at 60 fpm, a common industry rate, to move material.

Variable-speed conveyors adjust from standard conveyor speeds down to 7 fpm, so they are often used to slow material flow for quality checks.

Three-phase motors balance power more evenly than single-phase motors, so they are good for heavy loads. While a conveyor with a single-phase motor may lag when a heavy load reaches the conveyor, a conveyor with a three-phase motor will continue smoothly.

Note: Capacities are based on an evenly distributed load.

Non-Reversible Fixed Speed Conveyors—Galvanized Steel Bed with PVC Plastic Belt

	Wd.					No. of Stands
Lg., ft.	Belt	Frame	O'all Ht.	Cap., lbs.	Speed, fpm	Required	Included	Features		Each
120V AC—Single Phase (Plug In)
5	12"	17"	34"-38"	500	60	2	2	On/Off Switch	5816K111	000000000
5	20"	25"	34"-38"	465	60	2	2	On/Off Switch	5816K114	00000000
5	24"	29"	34"-38"	455	60	2	2	On/Off Switch	5816K117	00000000
7	12"	17"	34"-38"	495	60	2	2	On/Off Switch	5816K411	00000000
7	20"	25"	34"-38"	460	60	2	2	On/Off Switch	5816K511	00000000
7	24"	29"	34"-38"	445	60	2	2	On/Off Switch	5816K521	00000000
10	12"	17"	34"-38"	490	60	2	2	On/Off Switch	5816K112	00000000
10	20"	25"	34"-38"	450	60	2	2	On/Off Switch	5816K115	00000000
10	24"	29"	34"-38"	430	60	2	2	On/Off Switch	5816K118	00000000
12	12"	17"	34"-38"	485	60	3	3	On/Off Switch	5816K431	00000000
12	20"	25"	34"-38"	445	60	3	3	On/Off Switch	5816K531	00000000
12	24"	29"	34"-38"	420	60	3	3	On/Off Switch	5816K541	00000000
15	12"	17"	34"-38"	480	60	3	3	On/Off Switch	5816K113	00000000
15	20"	25"	34"-38"	435	60	3	3	On/Off Switch	5816K116	00000000
15	24"	29"	34"-38"	405	60	3	3	On/Off Switch	5816K119	00000000
22	12"	17"	34"-38"	465	60	4	4	On/Off Switch	5816K471	00000000
22	20"	25"	34"-38"	405	60	4	4	On/Off Switch	5816K571	00000000
22	24"	29"	34"-38"	380	60	4	4	On/Off Switch	5816K581	00000000
240/460V AC—Three Phase (Hardwire)
5	12"	17"	34"-38"	500	60	2	2	__	5816K121	00000000
5	20"	25"	34"-38"	465	60	2	2	__	5816K124	00000000
5	24"	29"	34"-38"	455	60	2	2	__	5816K127	00000000
7	12"	17"	34"-38"	495	60	2	2	__	5816K412	00000000
7	20"	25"	34"-38"	460	60	2	2	__	5816K512	00000000
7	24"	29"	34"-38"	445	60	2	2	__	5816K522	00000000
10	12"	17"	34"-38"	490	60	2	2	__	5816K122	00000000
10	20"	25"	34"-38"	450	60	2	2	__	5816K125	00000000
10	24"	29"	34"-38"	430	60	2	2	__	5816K128	00000000
12	12"	17"	34"-38"	485	60	3	3	__	5816K432	00000000
12	20"	25"	34"-38"	445	60	3	3	__	5816K532	00000000
12	24"	29"	34"-38"	420	60	3	3	__	5816K542	00000000
15	12"	17"	34"-38"	480	60	3	3	__	5816K123	00000000
15	20"	25"	34"-38"	435	60	3	3	__	5816K126	00000000
15	24"	29"	34"-38"	405	60	3	3	__	5816K129	00000000
22	12"	17"	34"-38"	465	60	4	4	__	5816K472	00000000
22	20"	25"	34"-38"	405	60	4	4	__	5816K572	00000000
22	24"	29"	34"-38"	380	60	4	4	__	5816K582	00000000

Reversible Fixed Speed Conveyors—Galvanized Steel Bed with PVC Plastic Belt

	Wd.					No. of Stands
Lg., ft.	Belt	Frame	O'all Ht.	Cap., lbs.	Speed, fpm	Required	Included	Features		Each
120V AC—Single Phase (Plug In)
7	12"	17"	34"-38"	460	60	2	2	On/Off Switch	5816K161	000000000
7	20"	25"	34"-38"	425	60	2	2	On/Off Switch	5816K166	00000000
7	24"	29"	34"-38"	410	60	2	2	On/Off Switch	5816K172	00000000
10	12"	17"	34"-38"	455	60	2	2	On/Off Switch	5816K162	00000000
10	20"	25"	34"-38"	415	60	2	2	On/Off Switch	5816K167	00000000
10	24"	29"	34"-38"	395	60	2	2	On/Off Switch	5816K173	00000000
12	12"	17"	34"-38"	450	60	3	3	On/Off Switch	5816K163	00000000
12	20"	25"	34"-38"	410	60	3	3	On/Off Switch	5816K168	00000000
12	24"	29"	34"-38"	385	60	3	3	On/Off Switch	5816K174	00000000
15	12"	17"	34"-38"	445	60	3	3	On/Off Switch	5816K164	00000000
15	20"	25"	34"-38"	400	60	3	3	On/Off Switch	5816K169	00000000
15	24"	29"	34"-38"	370	60	3	3	On/Off Switch	5816K175	00000000
22	12"	17"	34"-38"	430	60	4	4	On/Off Switch	5816K165	00000000
22	20"	25"	34"-38"	370	60	4	4	On/Off Switch	5816K171	00000000
22	24"	29"	34"-38"	345	60	4	4	On/Off Switch	5816K176	00000000
240/460V AC—Three Phase (Hardwire)
7	12"	17"	34"-38"	460	60	2	2	__	5816K177	00000000
7	20"	25"	34"-38"	425	60	2	2	__	5816K183	00000000
7	24"	29"	34"-38"	410	60	2	2	__	5816K188	00000000
10	12"	17"	34"-38"	455	60	2	2	__	5816K178	00000000
10	20"	25"	34"-38"	415	60	2	2	__	5816K184	00000000
10	24"	29"	34"-38"	395	60	2	2	__	5816K189	00000000
12	12"	17"	34"-38"	450	60	3	3	__	5816K179	00000000
12	20"	25"	34"-38"	410	60	3	3	__	5816K185	00000000
12	24"	29"	34"-38"	385	60	3	3	__	5816K191	00000000
15	12"	17"	34"-38"	445	60	3	3	__	5816K181	00000000
15	20"	25"	34"-38"	400	60	3	3	__	5816K186	00000000
15	24"	29"	34"-38"	370	60	3	3	__	5816K192	00000000
22	12"	17"	34"-38"	430	60	4	4	__	5816K182	00000000
22	20"	25"	34"-38"	370	60	4	4	__	5816K187	00000000
22	24"	29"	34"-38"	345	60	4	4	__	5816K193	00000000

Non-Reversible Variable Speed Conveyors—Galvanized Steel Bed with PVC Plastic Belt

	Wd.					No. of Stands
Lg., ft.	Belt	Frame	O'all Ht.	Cap., lbs.	Speed, fpm	Required	Included	Features		Each
240V AC—Three Phase (Plug In)
5	12"	17"	34"-38"	500	7-60	2	2	On/Off Switch	5816K141	000000000
5	20"	25"	34"-38"	465	7-60	2	2	On/Off Switch	5816K147	00000000
5	24"	29"	34"-38"	455	7-60	2	2	On/Off Switch	5816K154	00000000
7	12"	17"	34"-38"	495	7-60	2	2	On/Off Switch	5816K142	00000000
7	20"	25"	34"-38"	460	7-60	2	2	On/Off Switch	5816K148	00000000
7	24"	29"	34"-38"	445	7-60	2	2	On/Off Switch	5816K155	00000000
10	12"	17"	34"-38"	490	7-60	2	2	On/Off Switch	5816K143	00000000
10	20"	25"	34"-38"	450	7-60	2	2	On/Off Switch	5816K149	00000000
10	24"	29"	34"-38"	430	7-60	2	2	On/Off Switch	5816K156	00000000
12	12"	17"	34"-38"	485	7-60	3	3	On/Off Switch	5816K144	00000000
12	20"	25"	34"-38"	445	7-60	3	3	On/Off Switch	5816K151	00000000
12	24"	29"	34"-38"	420	7-60	3	3	On/Off Switch	5816K157	00000000
15	12"	17"	34"-38"	480	7-60	3	3	On/Off Switch	5816K145	00000000
15	20"	25"	34"-38"	435	7-60	3	3	On/Off Switch	5816K152	00000000
15	24"	29"	34"-38"	405	7-60	3	3	On/Off Switch	5816K158	00000000
22	12"	17"	34"-38"	465	7-60	4	4	On/Off Switch	5816K146	00000000
22	20"	25"	34"-38"	405	7-60	4	4	On/Off Switch	5816K153	00000000
22	24"	29"	34"-38"	380	7-60	4	4	On/Off Switch	5816K159	00000000

Reversible Variable Speed Conveyors—Galvanized Steel Bed with PVC Plastic Belt

	Wd.					No. of Stands
Lg., ft.	Belt	Frame	O'all Ht.	Cap., lbs.	Speed, fpm	Required	Included	Features		Each
240V AC—Three Phase (Plug In)
7	12"	17"	34"-38"	460	7-60	2	2	On/Off Switch	5816K761	000000000
7	20"	25"	34"-38"	425	7-60	2	2	On/Off Switch	5816K771	00000000
7	24"	29"	34"-38"	410	7-60	2	2	On/Off Switch	5816K781	00000000
10	12"	17"	34"-38"	455	7-60	2	2	On/Off Switch	5816K762	00000000
10	20"	25"	34"-38"	415	7-60	2	2	On/Off Switch	5816K772	00000000
10	24"	29"	34"-38"	395	7-60	2	2	On/Off Switch	5816K782	00000000
12	12"	17"	34"-38"	450	7-60	3	3	On/Off Switch	5816K763	00000000
12	20"	25"	34"-38"	410	7-60	3	3	On/Off Switch	5816K773	00000000
12	24"	29"	34"-38"	385	7-60	3	3	On/Off Switch	5816K783	00000000
15	12"	17"	34"-38"	445	7-60	3	3	On/Off Switch	5816K764	00000000
15	20"	25"	34"-38"	400	7-60	3	3	On/Off Switch	5816K774	00000000
15	24"	29"	34"-38"	370	7-60	3	3	On/Off Switch	5816K784	00000000
22	12"	17"	34"-38"	430	7-60	4	4	On/Off Switch	5816K765	00000000
22	20"	25"	34"-38"	370	7-60	4	4	On/Off Switch	5816K775	00000000
22	24"	29"	34"-38"	345	7-60	4	4	On/Off Switch	5816K785	00000000

Replacement Belts for Non-Reversible Conveyors

For 5 ft. Conveyor Lg.
Belt Wd.	Thick.	Construction	Color	Belt Surface Type		Each
PVC Plastic
12"	0.135"	1 Ply	Black	Smooth	5831K931	0000000
20"	0.135"	1 Ply	Black	Smooth	5831K941	000000
24"	0.135"	1 Ply	Black	Smooth	5831K951	000000
For 7 ft. Conveyor Lg.
PVC Plastic
12"	0.135"	1 Ply	Black	Smooth	5831K911	000000
20"	0.135"	1 Ply	Black	Smooth	5831K913	000000
24"	0.135"	1 Ply	Black	Smooth	5831K914	000000
For 10 ft. Conveyor Lg.
PVC Plastic
12"	0.135"	1 Ply	Black	Smooth	5831K933	000000
20"	0.135"	1 Ply	Black	Smooth	5831K943	000000
24"	0.135"	1 Ply	Black	Smooth	5831K953	000000
For 12 ft. Conveyor Lg.
PVC Plastic
12"	0.135"	1 Ply	Black	Smooth	5831K915	000000
20"	0.135"	1 Ply	Black	Smooth	5831K917	000000
24"	0.135"	1 Ply	Black	Smooth	5831K918	000000
For 15 ft. Conveyor Lg.
PVC Plastic
12"	0.135"	1 Ply	Black	Smooth	5831K936	000000
20"	0.135"	1 Ply	Black	Smooth	5831K946	000000
24"	0.135"	1 Ply	Black	Smooth	5831K956	000000
For 22 ft. Conveyor Lg.
PVC Plastic
12"	0.135"	1 Ply	Black	Smooth	5831K924	000000
20"	0.135"	1 Ply	Black	Smooth	5831K926	000000
24"	0.135"	1 Ply	Black	Smooth	5831K927	000000

Replacement Belts for Reversible Conveyors

For 7 ft. Conveyor Lg.
Belt Wd.	Thick.	Construction	Color	Belt Surface Type		Each
PVC Plastic
12"	0.135"	1 Ply	Black	Smooth	5831K932	0000000
20"	0.135"	1 Ply	Black	Smooth	5831K942	000000
24"	0.135"	1 Ply	Black	Smooth	5831K952	000000
For 10 ft. Conveyor Lg.
PVC Plastic
12"	0.135"	1 Ply	Black	Smooth	5831K934	000000
20"	0.135"	1 Ply	Black	Smooth	5831K944	000000
24"	0.135"	1 Ply	Black	Smooth	5831K954	000000
For 12 ft. Conveyor Lg.
PVC Plastic
12"	0.135"	1 Ply	Black	Smooth	5831K935	000000
20"	0.135"	1 Ply	Black	Smooth	5831K945	000000
24"	0.135"	1 Ply	Black	Smooth	5831K955	000000
For 15 ft. Conveyor Lg.
PVC Plastic
12"	0.135"	1 Ply	Black	Smooth	5831K937	000000
20"	0.135"	1 Ply	Black	Smooth	5831K947	000000
24"	0.135"	1 Ply	Black	Smooth	5831K957	000000
For 22 ft. Conveyor Lg.
PVC Plastic
12"	0.135"	1 Ply	Black	Smooth	5831K938	000000
20"	0.135"	1 Ply	Black	Smooth	5831K948	000000
24"	0.135"	1 Ply	Black	Smooth	5831K958	000000

Replacement Stands

For Belt Wd.		Each
12"	5816K31	000000
20"	5816K33	00000
24"	5816K34	000000

Replacement Drive Assemblies

For Belt Wd.		Each
12"	5816K25	0000000
20"	5816K27	000000
24"	5816K28	000000

Replacement Return Rollers

For Belt Wd.		Each
12"	5816K21	000000
20"	5816K23	00000
24"	5816K24	00000

Replacement Motors

120V AC—Single Phase (Plug In)
Motor Enclosure Type	Number of Speeds		Each
Totally Enclosed Fan Cooled (TEFC)	1	5816K232	0000000
240/460V AC—Three Phase (Hardwire)
Totally Enclosed Fan Cooled (TEFC)	1	5816K233	000000
Totally Enclosed Fan Cooled (TEFC)	Variable	5816K333	000000

Replacement Speed Reducers

Speed Ratio		Each
30:1	5816K235	0000000

Replacement Tail Pulleys

For Belt Wd.		Each
12"	5816K242	0000000
20"	5816K243	000000
24"	5816K244	000000

Replacement Tail Assemblies

For Belt Wd.		Each
12"	5816K237	0000000
20"	5816K238	000000
24"	5816K239	000000

Replacement Bearings

Bore Dia.	Mounted Bearing Type		Each
1 3/16"	Two-Bolt Flange Mount	5816K236	000000

Replacement Drive Pulleys

For Belt Wd.		Each
12"	5816K245	0000000
20"	5816K246	000000
24"	5816K247	000000

High-Capacity Ready-to-Run Mini Belt Conveyors

Conveyor Shown with Two Stands and Cross Braces (Sold Separately)

Conveyor

Plug these low-profile conveyors in and they are ready to run right out of the box. Steel construction and greater horsepower give these conveyors higher capacities and speeds than standard Ready-to-Run Mini Belt Conveyors. Side rails keep material from sliding off the conveyor. These conveyors are made of FDA listed materials.

Add brackets to mount a conveyor on a work surface or use two stands for freestanding use. Stands mount to conveyors with the included fasteners and have leveling feet to compensate for uneven floors.

Cross braces are recommended for all stands to add stability.

Note: Capacities are based on an evenly distributed load.

Fixed Speed Straight Conveyors—Steel Bed with Smooth Polyurethane Rubber Belt

Wd.				No. of Stands
Belt	Frame	O'all Ht.	Cap., lbs.	Required	Included	Voltage	Reversible	Specifications Met		Each
3 ft. Lg.
20 fpm
12"	12 1/4"	8"	270	2	None	120V AC	No	FDA Compliant 21 CFR 177.1680	5861K831	000000000
40 fpm
12"	12 1/4"	8"	270	2	None	120V AC	No	FDA Compliant 21 CFR 177.1680	5861K832	00000000
60 fpm
12"	12 1/4"	8"	270	2	None	120V AC	No	FDA Compliant 21 CFR 177.1680	5861K833	00000000
120 fpm
12"	12 1/4"	8"	270	2	None	120V AC	No	FDA Compliant 21 CFR 177.1680	5861K834	00000000
5 ft. Lg.
20 fpm
12"	12 1/4"	8"	270	2	None	120V AC	No	FDA Compliant 21 CFR 177.1680	5861K841	00000000
40 fpm
12"	12 1/4"	8"	270	2	None	120V AC	No	FDA Compliant 21 CFR 177.1680	5861K842	00000000
60 fpm
12"	12 1/4"	8"	270	2	None	120V AC	No	FDA Compliant 21 CFR 177.1680	5861K843	00000000
120 fpm
12"	12 1/4"	8"	270	2	None	120V AC	No	FDA Compliant 21 CFR 177.1680	5861K844	00000000
10 ft. Lg.
20 fpm
12"	12 1/4"	8"	270	2	None	120V AC	No	FDA Compliant 21 CFR 177.1680	5861K851	00000000
40 fpm
12"	12 1/4"	8"	270	2	None	120V AC	No	FDA Compliant 21 CFR 177.1680	5861K852	00000000
60 fpm
12"	12 1/4"	8"	270	2	None	120V AC	No	FDA Compliant 21 CFR 177.1680	5861K853	00000000
120 fpm
12"	12 1/4"	8"	270	2	None	120V AC	No	FDA Compliant 21 CFR 177.1680	5861K854	00000000

Replacement Belts

For 3 ft. Conveyor Lg.
Belt Wd.	Thick.	Construction	Color	Belt Surface Type	Specifications Met		Each
Polyurethane Rubber
12"	0.06"	2 Ply	White	Smooth	FDA Compliant 21 CFR 177.1680	5861K194	0000000
For 5 ft. Conveyor Lg.
Polyurethane Rubber
12"	0.06"	2 Ply	White	Smooth	FDA Compliant 21 CFR 177.1680	5861K195	000000
For 10 ft. Conveyor Lg.
Polyurethane Rubber
12"	0.06"	2 Ply	White	Smooth	FDA Compliant 21 CFR 177.1680	5861K196	000000

Brackets

Ht.	Dp.	Material	Mounting Fasteners Included		Each
4 13/16"	1 1/4"	Zinc Plated Steel	Yes	5861K463	000000

Stands

Ht.	Wd.	Mounting Fasteners Included	Material	Features		Each
30"-33"	36 1/4"	Yes	Aluminum	Leveling Feet	5861K971	0000000
36"-39"	36 1/4"	Yes	Aluminum	Leveling Feet	5861K972	000000
42"-45"	36 1/4"	Yes	Aluminum	Leveling Feet	5861K973	000000

Cross Braces

For Conveyor Lg., ft.	Material		Pair
3	Aluminum	5861K981	0000000
5	Aluminum	5861K982	000000
10	Aluminum	5861K983	000000

Replacement Drive Bearings

Direction of Operation	Material		Each
Right	Steel	5861K168	0000000
Left	Steel	5861K169	000000

Replacement Drive Pulleys

For Belt Wd.	Material		Each
12"	Steel	5861K173	0000000

Replacement Tail Pulleys

For Belt Wd.		Each
12"	5861K213	0000000

Replacement Motor Assembly

Totally Enclosed Fan Cooled (TEFC)
For Speed, fpm	Includes		Each
20	Gearmotor, Speed Reducer	5861K941	000000000
40	Gearmotor, Speed Reducer	5861K942	00000000
60	Gearmotor, Speed Reducer	5861K943	00000000
120	Gearmotor, Speed Reducer	5861K944	00000000

Replacement Couplings

OD		Each
1/2"	5861K954	0000000

Steel Mesh Belt Conveyors

Move parts down your line in extreme temperatures. These conveyors are often used in high-heat applications, such as cooling welded parts and steam-cleaning parts to remove grease. They’re used in sub-zero conditions, too, such as pharmaceutical and frozen produce lines. The mesh belt lets airflow cool parts from above or below. It also allows liquid to drain through to prevent pooling and help parts dry off quickly.

In addition to better performance in extreme temperatures, these steel belt conveyors withstand abrasion better than rubber, PVC, and polyurethane ones. They won’t melt in heat, become brittle from cold, or be torn by sharp metal parts. The steel is galvanized to resist rusting from humidity and moisture. Adjust the two included stands to raise your conveyor between 30” and 38” high.

Note: Capacities are based on an evenly distributed load.

Conveyors

							No. of Stands
Belt Wd.	Frame Wd.	Lg., ft.	O'all Height	Cap., lbs.	Speed, fpm	Wear Strip Material	Required	Included	Reversible	Features		Each
Steel Bed with Galvanized Steel Belt
120V AC—Single Phase (Plug In)
12"	15"	5	30"-38"	450	60	UHMW Polyethylene Plastic	2	2	No	On/Off Switch	5835N11	000000000
24"	27"	5	30"-38"	450	60	UHMW Polyethylene Plastic	2	2	No	On/Off Switch	5835N12	00000000

Replacement Belts

Galvanized Steel
Belt Wd.	For Conveyor Lg., ft.		Each
12"	5	5835N111	0000000
24"	5	5835N121	00000000

Replacement Motors

120V AC—Single Phase
Motor Enclosure Type		Each
Totally Enclosed Fan Cooled (TEFC)	5835N101	0000000

Replacement Drive End Sprockets

Number of Teeth	OD	Wd.		Each
18	6"	2 1/4"	5835N102	0000000

Replacement Tail End Sprockets

Number of Teeth	OD	Wd.		Each
18	6"	2 1/4"	5835N103	0000000

Replacement On/Off Switches

Hardwire
Wire Lead Lg., ft.	Wd.	Ht.		Each
2	2 1/2"	4 1/2"	5835N104	0000000