Coordinate Measuring Machine Positioners

From towers and brackets to standoffs and supports, these components are the building blocks for your custom fixturing setup. They elevate parts so you can access a variety of angles for measuring and inspecting while protecting your measuring device from hitting the inspection table. You’ll often see them used with coordinate measuring machines (CMMs). They’re not for use in machining applications.

Kits

Kits come with a base set of clamps, standoffs, and other supports for positioning parts. Add other components, such as magnetic V-supports, to expand your starter toolkit for complex setups.

	Includes		Each
1/4"-20 Threads



	43	3 Hold-Down Clamps—1 9/16" Reach × 3" O'all Ht. 3 Hold-Down Clamps—2 5/16" Reach × 3" O'all Ht. 3 Standoffs—1/2" Dia. × 3/4" Ht. 3 Standoffs—1/2" Dia. × 2" Ht. 3 Standoffs—3/4" Dia. × 3/4" Ht. 3 Standoffs—3/4" Dia. × 2" Ht. 6 Standoffs—1/2" Dia. × 1" Ht. 6 Standoffs—3/4" Dia. × 1" Ht. 3 Pin Supports—1/2" Dia. × 1/2" Ht. 3 Pin Supports—3/4" Dia. × 1/2" Ht. 3 Cone Supports 1 Adjustable-Height Sleeve for Standoffs 2 Positioning Plates 1 Wood Stand	1355N85	0000000


	63	3 Hold-Down Clamps—1 9/16" Reach × 3" O'all Ht. 3 Hold-Down Clamps—2 5/16" Reach × 3" O'all Ht. 2 Toggle Clamps with Mounting Plate 3 Standoffs—1/2" Dia. × 3/4" Ht. 3 Standoffs—1/2" Dia. × 2" Ht. 3 Standoffs—3/4" Dia. × 3/4" Ht. 3 Standoffs—3/4" Dia. × 2" Ht. 3 Standoffs—1" Dia. × 3/4" Ht. 3 Standoffs—1" Dia. × 2" Ht. 6 Standoffs—1/2" Dia. × 1" Ht. 6 Standoffs—3/4" Dia. × 1" Ht. 6 Standoffs—1" Dia. × 1" Ht. 1 Precision Adjustable-Height Standoff—1/2" Dia. 3 Pin Supports—1/2" Dia. × 1/2" Ht. 3 Pin Supports—3/4" Dia. × 1/2" Ht. 6 Cone Supports 2 Any-Angle Cone Supports 1 Adjustable-Height Sleeve for Standoffs 2 Positioning Plates 1 Wood Stand	1355N95	00000000


	M6 Threads



			42	2 Hold-Down Clamps—38 mm Reach × 38 mm O'all Ht. 4 Hold-Down Clamps—58 mm Reach × 75 mm O'all Ht. 3 Standoffs—13 mm Dia. × 20 mm Ht. 3 Standoffs—13 mm Dia. × 25 mm Ht. 3 Standoffs—13 mm Dia. × 50 mm Ht. 3 Standoffs—19 mm Dia. × 20 mm Ht. 3 Standoffs—19 mm Dia. × 25 mm Ht. 3 Standoffs—19 mm Dia. × 50 mm Ht. 3 Standoffs—25 mm Dia. × 20 mm Ht. 3 Standoffs—25 mm Dia. × 25 mm Ht. 3 Standoffs—25 mm Dia. × 50 mm Ht. 1 Adjustable-Height Standoff—13 mm Dia. 2 Pin Supports—13 mm Dia. × 25 mm Ht. 3 Cone Supports 1 Positioning Plate—35 mm Lg. 1 Positioning Plate—76 mm Lg. 1 Acetal Plastic Tray	1409N51	000000

Fixture Towers

Fixture towers give you four vertical grids and a small horizontal one on top, so you can set up custom scaffolds to position parts in several planes. Their height makes them useful for propping up large workpieces. Each tower can uphold multiple parts. The threaded holes on the vertical grids are labeled with letters and numbers, making it easy to identify holes.

		Tower		Base
	Overall Ht.	Lg.	Wd.	Lg.	Wd.	Number of Holes	Material	Includes		Each
1/4"-20 Hole Thread Size



		6"	1"	1"	5"	1"	41	Aluminum	—	1337N22	0000000


		12"	1 1/2"	1 1/2"	6"	1 1/2"	180	Aluminum	—	1337N23	000000
		24"	2"	2"	6"	2"	372	Aluminum	—	1337N24	000000


		M6 Hole Thread Size



				150 mm	25 mm	25 mm	127 mm	25 mm	33	Aluminum	Two M6 Knurled Knobs	1409N73	000000

Angle Brackets

Angle brackets create a 90° mounting point, so you can secure small workpieces with supports. Shorter than towers, they’re a good choice for parts that are about the size of your palm. The base bolts into your surface, so these brackets won’t budge.

				Slots
	Lg.	Wd.	Ht.	Lg.	Wd.	Number of Holes	Material	Includes		Each
1/4"-20 Hole Thread Size



		3"	1"	3"	1 3/4"	1/4"	18	Aluminum	—	1337N19	000000


		M6 Hole Thread Size



				76 mm	25 mm	76 mm	44 mm	7.8 mm	18	Aluminum	Two M6 Bolts	1409N68	00000


				M8 Hole Thread Size



						76 mm	25 mm	76 mm	44 mm	7.2 mm	12	Aluminum	Two M8 Bolts	1409N69	00000

Standoffs

Adjustable

Standoff

Height

Standoffs raise the height of towers and angle brackets or extend the reach of supports and clamps. Screw them into one another for added length.

Adjustable Standoff Height—Standoffs with adjustable height have a thumb screw to raise and lower components with precision.

	Dia.	Material		Each
1/4"-20 Threads







		Fixed Standoff Height

		1/2"	1/2"	1/4"	Steel	1409N23	000000


		1/2"	3/4"	1/4"	Steel	1409N24	00000
		1/2"	1"	1/4"	Steel	1409N25	00000
		1/2"	2"	1/4"	Steel	1409N26	00000
		1/2"	3"	1/4"	Steel	1409N27	00000
		3/4"	1/2"	1/4"	Steel	1409N28	00000
		3/4"	3/4"	1/4"	Steel	1409N29	00000
		3/4"	1"	1/4"	Steel	1409N31	00000
		3/4"	2"	1/4"	Steel	1409N32	00000
		3/4"	3"	1/4"	Steel	1409N33	00000
		1"	1/2"	1/4"	Steel	1409N34	00000


		1"	3/4"	1/4"	Steel	1409N35	00000
		1"	1"	1/4"	Steel	1409N36	00000
		1"	2"	1/4"	Steel	1409N37	00000
		1"	3"	1/4"	Steel	1409N38	00000




				Adjustable Standoff Height

				1/2"	1 7/16" to 1 3/4"	1/4"	Aluminum	2046N48	00000


				M4 × 0.7 mm Threads







								Fixed Standoff Height

								12 mm	25 mm	3.8 mm	Steel	1409N54	00000


								M6 × 1 mm Threads







												Fixed Standoff Height

												13 mm	10 mm	6.2 mm	Steel	1409N52	00000


												13 mm	25 mm	6.2 mm	Steel	1409N55	00000
13 mm												50 mm	6.2 mm	Steel	1409N57	00000
13 mm	75 mm											6.2 mm	Steel	1409N58	00000


M8 × 1.25 mm Threads







												Fixed Standoff Height

												13 mm	15 mm	7.7 mm	Steel	1409N53	00000


												13 mm	25 mm	7.5 mm	Steel	1409N56	00000

Pin Supports

Pin supports prop up your workpiece in two places, unlike standoffs and cone supports. Thread them horizontally into an angle bracket so the lip of a part, such as a flange, sits on the pin while the rest sits on the body. They’re especially helpful when you need to measure workpieces from underneath.

			Pin
	Dia.	Ht.	Dia.	Ht.	Thread Lg.	Material		Each
1/4"-20 Threads



		1/2"	3/4"	1/8"	1/4"	1/4"	Steel	2197N64	000000


		3/4"	3/4"	1/8"	1/4"	1/4"	Steel	2197N65	00000

Magnetic Supports

Magnetic supports securely raise and hold metal parts, no clamps required.

	Ht.	Thread Lg.	Max. Magnetic Pull, lbf	Material		Each
1/4"-20 Threads



	1/2"	1"	1/4"	9	Steel	1409N59	000000


	M6 × 1 mm Threads



			13 mm	25 mm	6.2 mm	9	Steel	1409N61	00000

Magnetic V-Supports

Magnetic V-supports have a notch to cradle metal cylindrical workpieces, like a spoon rest.

	Ht.	V Wd.	V Dp.	V Angle	Thread Lg.	Max. Magnetic Pull, lbf	Material		Each
1/4"-20 Threads



	1"	1"	1"	1/4"	120°	1/4"	16	Steel	1409N62	0000000


	M6 × 1 mm Threads



			13 mm	25 mm	13 mm	3.6 mm	120°	6.3 mm	9	Steel	1409N63	00000

Cone Supports

Cone supports have a round pointed tip to minimize contact with your workpiece, so they’re often used to prop up delicate parts. They’re also useful for parts with irregular surfaces that slide off larger supports. Made of plastic, they’re nonmarring.

	Ht.	Thread Lg.	Material		Each
1/4"-20 Threads



	5/8"	1/2"	1/4"	Acetal	1966N78	000000


	M6 × 1 mm Threads



			16 mm	13 mm	9.6 mm	Nylon	1409N71	0000


			M8 × 1.25 mm Threads



					16 mm	13 mm	7.7 mm	Nylon	1409N72	0000

Any-Angle Cone Supports

	Body Lg.	Arm Rotation	Thread Lg.	Body Material	Cone Material		Each
1/4"-20 Threads



	4 1/4"	4"	360°	1 1/8"	Steel	Acetal	1718N89	000000

Adjustable-Height Sleeves

Adjustable-height sleeves convert standoffs with a fixed height into standoffs with an adjustable height. Slide them over your 1/2" diameter standoff and move the sleeve up or down to set your desired height. Lock them in place with the thumb screw.

	Dia.	Ht.	Material	Includes		Each
1/4"-20 Threads



	1/2"	1 1/8"	2"	Acetal	1/4"-20 Knurled Knob	2237N44	000000

Positioners

Positioners secure components anywhere along the length of their slot, similar to drop-in nuts on T-slotted rails. This gives you the flexibility to install components between the threaded holes on plates, brackets, and towers.

				Slots
	Lg.	Wd.	Thk.	Lg.	Wd.	Number of Holes	Material	Includes		Each
8-32, 10-32 Hole Thread Size



		3 1/8"	1 1/2"	1/4"	1"	9/32"	6, 4	Steel	1/4"-20 Knurled Knob	1637N72	000000


		1/4"-20 Hole Thread Size



				2"	5/8"	1/4"	7/8"	9/32"	1	Steel	1/4"-20 Knurled Knob	1637N73	00000


				3"	1"	1/4"	1 3/4"	9/32"	1	Steel	1/4"-20 Knurled Knob	1637N74	00000


				M6 Hole Thread Size



						75 mm	25 mm	10 mm	30 mm	6.5 mm	1	Steel	Two M6 Knurled Knobs	1409N74	00000


						M8 Hole Thread Size



								65 mm	20 mm	10 mm	30 mm	8.5 mm	1	Steel	Two M8 Knurled Knobs	1409N75	00000

Trays

Trays have slots to store and organize standoffs, supports, and other small components.

	Wd.	Ht.	Material		Each
For 1/4"-20 Thread



	17"	8"	1"	Acetal	1409N64	0000000


	For M4 Thread



			304 mm	196 mm	25 mm	HDPE	1409N67	000000


			For M6 Thread



					432 mm	203 mm	25 mm	Acetal	1409N65	000000


					For M8 Thread



							432 mm	203 mm	25 mm	Acetal	1409N66	000000

Corner Plates

Corner plates act as a repeatable stop, making it easy for your CMM and vision system to find your workpiece. When using them with a vision system, fasten them to an acrylic plate. They have threaded holes for standoffs and other fixturing components.

	Wd.	Thk.	Number of Holes	Material	Includes		Each
1/4"-20 Hole Thread Size



	1 3/4"	1 3/4"	1/4"	5	Aluminum	Two 1/4"-20 Bolts	1409N77	000000


	3 1/4"	3 1/4"	1/4"	11	Aluminum	Two 1/4"-20 Bolts	1409N78	00000


	M6 Hole Thread Size



			44 mm	44 mm	6 mm	5	Aluminum	Two M6 Bolts	1409N79	00000


			75 mm	75 mm	6 mm	9	Aluminum	Two M6 Bolts	1409N81	00000

Fixture Plates

Lay the foundation for your fixturing setup. These plates have a grid with evenly spaced threaded holes to install angle brackets and other fixturing components. They’re often used to help secure workpieces for measuring and inspecting. Just like a battleship gameboard, the edges are labeled with letters and numbers, making it easy to identify holes. While these lightweight plates aren’t for machining, you can use them for light fabrication jobs, such as laser marking. All can be attached to your table with clamps (not included), making them easy to remove and swap.

Fixture Plates

Plates with mounting holes can be bolted down on fixture tables for more stability than those held down by clamps. Make sure the grid of your plate and table align for precise measurements.

Anodized Aluminum—Anodized aluminum plates are often used with coordinate measuring machines (CMMs) and optical comparators. The coating protects them from scratches and wear, even when you’re working with heavy parts.

Acrylic Plastic—Acrylic plastic plates are clear, so they let light pass through them. This gives you or your vison system unobstructed views of your workpiece from all angles.

					Holes		Bolt-On Mount
	Lg.	Wd.	Thk.	Parallel Tolerance	No. of	Ctr.-to-Ctr.	Mounting Fasteners Included	No. of Mounting Holes	Mounting Hole Style	For Mounting Fastener Thread Size	Material		Each
1/4"-20 Hole Thread Size



		3"	3"	1/2"	0.025"	21	1/2"	Yes	4	Counterbored	1/4"-20	Anodized Aluminum	1337N17	0000000


		3"	6"	1/2"	0.025"	51	1/2"	Yes	4	Counterbored	1/4"-20	Anodized Aluminum	1337N18	000000
		6"	6"	3/8"	0.025"	121	1/2"	—	—	—	—	Anodized Aluminum	1337N16	000000
		6"	6"	3/8"	Not Rated	121	1/2"	—	—	—	—	Acrylic Plastic	1337N21	000000
		12"	12"	1/2"	0.005"	484	1/2"	—	—	—	—	Anodized Aluminum	1337N11	000000
		18"	18"	1/2"	0.01"	1,156	1/2"	—	—	—	—	Anodized Aluminum	1337N12	00000000
		24"	24"	3/4"	0.01"	2,116	1/2"	—	—	—	—	Anodized Aluminum	1337N13	00000000
		30"	30"	3/4"	0.635 mm	3,249	1/2"	—	—	—	—	Anodized Aluminum	6364N18	00000000


		M4 Hole Thread Size



				300 mm	300 mm	19 mm	Not Rated	324	15 mm	—	—	—	—	Acrylic Plastic	6364N12	000000


				M6 Hole Thread Size



						150 mm	150 mm	10 mm	0.635 mm	81	15 mm	—	—	—	—	Anodized Aluminum	6364N11	000000


						300 mm	300 mm	13 mm	0.635 mm	324	15 mm	—	—	—	—	Anodized Aluminum	6364N13	000000
						450 mm	450 mm	13 mm	0.635 mm	729	15 mm	—	—	—	—	Anodized Aluminum	6364N15	00000000
						600 mm	600 mm	19 mm	0.635 mm	1,369	15 mm	—	—	—	—	Anodized Aluminum	6364N17	00000000


						M8 Hole Thread Size



								300 mm	300 mm	13 mm	0.635 mm	289	15 mm	—	—	—	—	Anodized Aluminum	6364N14	000000


								450 mm	450 mm	13 mm	0.635 mm	729	15 mm	—	—	—	—	Anodized Aluminum	6364N16	00000000

Quick-Change Adapters

Quick-change adapters fasten to the side of plates, converting them into quick-change fixture plates. Rather than having to clamp or bolt plates down, adapters let you snap them in and out of a magnetic mounting rail.

			Magnetic Mount		Bolt-On Mount
Lg.	Wd.	Thk.	Max. Magnetic Pull, lbf	No. of Mounting Edges	Mounting Fasteners Included	No. of Mounting Holes	For Mounting Fastener Thread Size	Mounting Hole Ctr.-to-Ctr.	Material		Each



	6"	1"	1/2"	3.5	1	Yes	2	10-32	5 1/2"	Anodized Aluminum	6364N19	0000000


	180 mm	30 mm	13 mm	3.5	1	Yes	2	M6	147 mm	Anodized Aluminum	6364N21	000000

Clamps for Parts Inspection

With a light yet sturdy hold, these clamps help you keep workpieces in place hands-free for measuring and inspecting. Thread them right into your fixturing surface, whether it’s a plate, tower, or table. Because they apply less pressure than machining clamps, they won’t distort your parts, so you can take accurate measurements. While these clamps aren’t sturdy enough for use in machining, you can still use them for light fabrication work, such as laser engraving.

Hold-Down Clamps

Tension Spring

Wire

Tension

Spring

Thumb

Screw

Squeeze

Tabs

Hold-down clamps secure parts from the top.

Tension Spring—Tension spring clamps are the most common type of clamp. Slide the arm down the shaft until it touches the top of your workpiece. Since you apply pressure directly, using too much force might move your part.

Wire Tension Spring—Wire tension spring clamps have a slimmer profile than standard clamps, which means they don’t cover up as much of your workpiece. They’re often used to clamp small parts. Pull the wire arm away from the shaft, position your part, then release the arm so it moves back to cradle your part in place.

Thumb Screw—Clamps with a thumb screw give you more control over the pressure you apply on a workpiece than tension spring clamps. Twisting the screw moves the clamp up or down in small increments, so they’re less likely to dent or scratch your workpiece. The knurled head on the screw is slip resistant, letting you make precise turns with reliable grip.

Squeeze Tabs—Clamps with squeeze tabs on the back are best for supporting delicate parts. They have the lightest touch of any clamps we offer, because the tension is held in the tabs rather than the clamp itself. Press the tabs together like a clothespin and rotate the clamp where you need it.

Rubber-Coated Tip—Clamps with a rubber-coated tip are less likely to scrape parts than clamps with an uncoated tip.

	Clamps							Replacement Mounting Shafts		Replacement Clamp Arms
	Reach Lg.	Ht.	Thread Lg.	Material	Tip Finish		Each		Each		Each
Tension Spring







				1/4"-20 Threads

				13/16"	1"	1/4"	Aluminum	—	6203N27	000000	———	0	———	0


				13/16"	2"	1/4"	Aluminum	—	1337N26	00000	———	0	———	0
				1 9/16"	2 3/4"	1/4"	Aluminum	—	1728N91	00000	———	0	———	0
				1 9/16"	2 3/4"	1/4"	Aluminum	Rubber Coated	1728N93	00000	———	0	———	0
				2 5/16"	2 3/4"	1/4"	Aluminum	—	1728N92	00000	———	0	———	0
				2 5/16"	2 3/4"	1/4"	Aluminum	Rubber Coated	1728N94	00000	———	0	———	0
				3 7/16"	3"	1/4"	Aluminum	—	1337N25	00000	———	0	———	0




						M4 × 0.7 mm Threads

						21 mm	50 mm	4.5 mm	Aluminum	—	1337N37	00000	———	0	———	0


						38 mm	50 mm	4.5 mm	Aluminum	—	1337N35	00000	———	0	———	0
						58 mm	50 mm	4.5 mm	Aluminum	—	1337N36	00000	———	0	———	0




								M6 × 1 mm Threads

								21 mm	50 mm	6.2 mm	Aluminum	—	1337N34	00000	———	0	———	0


								38 mm	75 mm	6.2 mm	Aluminum	—	1337N32	00000	———	0	———	0
								58 mm	75 mm	6.2 mm	Aluminum	—	1337N33	00000	———	0	———	0




										M8 × 1.25 mm Threads

										38 mm	75 mm	6.2 mm	Aluminum	—	1337N29	00000	———	0	———	0


										58 mm	75 mm	6.2 mm	Aluminum	—	1337N31	00000	———	0	———	0


										Wire Tension Spring







														1/4"-20 Threads

														1 1/4"	1"	1/4"	Aluminum	—	1337N27	00000	———	0	———	0


2"	2"													1/4"	Aluminum	—	1337N28	00000	———	0	———	0


Thumb Screw







														1/4"-20 Threads

														1 9/16"	1 1/2"	3/8"	Aluminum	—	6203N11	00000	———	0	———	0


														3"	2 1/2"	1/4"	Aluminum	—	6203N12	00000	———	0	———	0
														4 3/8"	3 1/2"	3/8"	Aluminum	—	6203N13	000000	———	0	———	0




														M6 × 1 mm Threads

														40 mm	38 mm	9.5 mm	Aluminum	—	6203N14	00000	———	0	———	0


														76 mm	63 mm	6.4 mm	Aluminum	—	6203N15	00000	———	0	———	0
														112 mm	89 mm	9.5 mm	Aluminum	—	6203N16	000000	———	0	———	0


						Squeeze Tabs







																1/4"-20 Threads

																3 1/4"	3"	3/8"	Plastic	—	6203N21	00000	6203N18	000000	6203N17	000000




																M6 × 1 mm Threads

																83 mm	76 mm	9.5 mm	Plastic	—	6203N22	00000	6203N19	00000	6203N17	00000

Side Clamps

Side clamps don’t block access to the top of your workpiece like hold-down clamps. They push one side of your workpiece against another barrier, such as a standoff, support, or corner plate. Made of durable yet flexible plastic, the outer edge of the clamp slightly contracts when you pull the circular trigger—like drawing a bow.

Thread Lg.	Material		Each







1/4"-20 Threads

3 1/16"	2 5/8"	1/2"	3/4"	Plastic	6203N23	000000




		M6 × 1 mm Threads

		77 mm	66 mm	13 mm	19 mm	Plastic	6203N24	00000

Positioning Clamps

Positioning clamps give you the most flexible setup of any clamps. They’re the best choice for curved or irregular shapes, such as cylinders. Both sliding pins on each arm have an O-ring that compresses when you push them tight against a workpiece. The O-ring cushions the pressure you apply, and it also gives grip while protecting parts from scratches. With an arm that rotates 360°, you can create movable supports. These clamps also have a magnetic flange to help secure metal parts.

	Opening
Reach Lg.	Min.	Max.	Lg.	Wd.	Ht.	Thread Lg.	Material		Pair







			1/4"-20 Threads

			3/4"	7/16"	2 3/4"	3 5/8"	9/16"	2 1/2"	1/4"	Aluminum	6203N25	0000000




					M6 × 1 mm Threads

					19 mm	11 mm	57 mm	92 mm	12.7 mm	63 mm	6.4 mm	Aluminum	6203N26	000000

Quick-Change Fixture Plates

Snap these magnetic plates in and out of the mounting rail as swappable stages for measuring and inspecting parts. Unlike standard fixture plates that you need to bolt or clamp down, these quickly attach and release, creating a hub of plates that are locked and loaded. As your coordinate measuring machine (CMM) works in the background, position your next workpiece on another plate so it’s ready to switch out for the next run. If you need more room to inspect parts, combine plates in a chain to extend your surface. While they’re not sturdy enough for use in machining, you can use them for light fabrication work, such as laser engraving.

When docked on a rail, the strong magnets in these plates hold them still. The lightweight aluminum makes them easy to lift and swap, and an anodized coating protects them from scratches and wear, even if you’re working with heavy parts.

Fixture Plates


1 Mounting Edge	4 Mounting Edges

Fixture plates hold components such as towers, clamps, and standoffs in the evenly spaced holes to raise and position parts.

4 Mounting Edges—Plates with four mounting edges can be rotated in 90° increments. Instead of having to reposition your workpieces, turn the plate to access other angles.

					Holes
	Lg.	Wd.	Thk.	Parallel Tolerance	No. of	Ctr.-to-Ctr.	Max. Magnetic Pull, lbf	Material		Each
1 Mounting Edge—1/4"-20 Hole Thread Size



		6"	6"	1/2"	0.005"	36	1"	3.5	Anodized Aluminum	6368N11	0000000


		6"	12"	1/2"	0.005"	72	1"	3.5	Anodized Aluminum	6368N12	000000
		6"	12"	1/2"	0.005"	237	1/2"	3.5	Anodized Aluminum	6368N13	000000
		6"	18"	1/2"	0.005"	108	1"	3.5	Anodized Aluminum	6368N14	000000
		12"	6"	1/2"	0.005"	72	1"	3.5	Anodized Aluminum	6368N15	000000
		12"	12"	1/2"	0.005"	144	1"	3.5	Anodized Aluminum	6368N16	000000
		12"	18"	1/2"	0.005"	216	1"	3.5	Anodized Aluminum	6368N17	000000
		18"	18"	1/2"	0.005"	324	1"	3.5	Anodized Aluminum	6368N18	00000000
		18"	24"	1/2"	0.005"	432	1"	3.5	Anodized Aluminum	6368N19	00000000


		1 Mounting Edge—M6 Hole Thread Size



				180 mm	180 mm	13 mm	0.127 mm	81	20 mm	3.5	Anodized Aluminum	6368N23	000000


				180 mm	360 mm	13 mm	0.127 mm	162	20 mm	3.5	Anodized Aluminum	6368N24	000000
				360 mm	360 mm	13 mm	0.127 mm	324	20 mm	3.5	Anodized Aluminum	6368N25	000000
				360 mm	540 mm	13 mm	0.127 mm	486	20 mm	3.5	Anodized Aluminum	6368N26	00000000


				4 Mounting Edges—1/4"-20 Hole Thread Size



						6"	6"	1/2"	0.005"	52	1"	3.5	Anodized Aluminum	6368N33	000000

Corner Plates

Image of Product. Bottom orientation. Contains Annotated. Coordinate Measuring Machine Plates and Fixtures. Quick-Change Fixture Plates, Corner Plates.

Corner plates make it easy for your CMM to find a workpiece since they act as a repeatable stop. The negative space gives you access underneath parts that are propped up.

					Holes
	Lg.	Wd.	Thk.	Parallel Tolerance	No. of	Ctr.-to-Ctr.	Max. Magnetic Pull, lbf	Material		Each
1 Mounting Edge—1/4"-20 Hole Thread Size



		6"	6"	1/2"	0.005"	15	1"	3.5	Anodized Aluminum	6368N29	0000000


		1 Mounting Edge—M6 Hole Thread Size



				180 mm	180 mm	13 mm	0.127 mm	22	20 mm	3.5	Anodized Aluminum	6368N31	000000

Mounting Rails

Mounting rails are the home base for your magnetic fixture plates, corner plates, and plates for calibration spheres. Bolt them to your table to secure the dock for your quick-change system hub. Quick-change plate adapters allow you to convert a standard fixture plate into a quick-change fixture plate compatible with the mounting rail.

			Magnetic Mount		Bolt-On Mount
Lg.	Wd.	Thk.	Max. Magnetic Pull, lbf	No. of Mounting Edges	Mounting Fasteners Included	No. of Mounting Slots	Mounting Slot Lg.	Mounting Slot Wd.	Material		Each



	18"	2"	1/2"	3.5	3	No	2	5 7/16"	1/2"	Anodized Aluminum	6368N21	0000000


	30"	2"	1/2"	3.5	5	No	6	3 1/8"	1/2"	Anodized Aluminum	6368N22	000000
	540 mm	50 mm	13 mm	3.5	3	No	3	120 mm	13 mm	Anodized Aluminum	6368N27	000000
	720 mm	50 mm	13 mm	3.5	4	No	6	68 mm	13 mm	Anodized Aluminum	6368N28	000000

Threaded Hole Location Gauges

Find the true center of threaded holes to precisely align and measure parts. Once you thread these gauges into a hole, their cylinder sticks out as a reliable reference point. They’re often used with a coordinate measuring machine (CMM) to pinpoint the coordinates of the cylinder’s exact center. You can then use those coordinates to measure distances between points or reference them for error-free assembly. Even without a CMM, you can use these gauges with a micrometer to measure accurate center-to-center distances.

Thread Size	Thread Type	Hardness	Material		Each
0-80	UNF	Rockwell C60	Tool Steel	6648N45	0000000
1-64	UNC	Rockwell C60	Tool Steel	6648N46	000000
1-72	UNF	Rockwell C60	Tool Steel	6648N47	000000
2-56	UNC	Rockwell C60	Tool Steel	6648N48	000000
2-64	UNF	Rockwell C60	Tool Steel	6648N49	000000
3-48	UNC	Rockwell C60	Tool Steel	6648N51	000000
3-56	UNF	Rockwell C60	Tool Steel	6648N52	000000
4-40	UNC	Rockwell C60	Tool Steel	6648N53	000000
4-48	UNF	Rockwell C60	Tool Steel	6648N54	000000
5-40	UNC	Rockwell C60	Tool Steel	6648N55	000000
5-44	UNF	Rockwell C60	Tool Steel	6648N56	000000
6-32	UNC	Rockwell C60	Tool Steel	6648N57	000000
6-40	UNF	Rockwell C60	Tool Steel	6648N58	000000
8-32	UNC	Rockwell C60	Tool Steel	6648N59	000000
8-36	UNF	Rockwell C60	Tool Steel	6648N61	000000
10-24	UNC	Rockwell C60	Tool Steel	6648N62	000000
10-32	UNF	Rockwell C60	Tool Steel	6648N63	000000
12-24	UNC	Rockwell C60	Tool Steel	6648N64	000000
12-28	UNF	Rockwell C60	Tool Steel	6648N65	000000
1/4"-20	UNC	Rockwell C60	Tool Steel	6648N66	000000
1/4"-28	UNF	Rockwell C60	Tool Steel	6648N67	000000
5/16"-18	UNC	Rockwell C60	Tool Steel	6648N68	000000
5/16"-24	UNF	Rockwell C60	Tool Steel	6648N69	000000
3/8"-16	UNC	Rockwell C60	Tool Steel	6648N71	000000
3/8"-24	UNF	Rockwell C60	Tool Steel	6648N72	000000
7/16"-14	UNC	Rockwell C60	Tool Steel	6648N73	000000
7/16"-20	UNF	Rockwell C60	Tool Steel	6648N74	000000
1/2"-13	UNC	Rockwell C60	Tool Steel	6648N75	000000
1/2"-20	UNF	Rockwell C60	Tool Steel	6648N76	000000
9/16"-12	UNC	Rockwell C60	Tool Steel	6648N77	000000
9/16"-18	UNF	Rockwell C60	Tool Steel	6648N78	000000
5/8"-11	UNC	Rockwell C60	Tool Steel	6648N79	000000
5/8"-18	UNF	Rockwell C60	Tool Steel	6648N81	000000
3/4"-10	UNC	Rockwell C60	Tool Steel	6648N82	000000
3/4"-16	UNF	Rockwell C60	Tool Steel	6648N83	000000
7/8"-9	UNC	Rockwell C60	Tool Steel	6648N84	000000
7/8"-14	UNF	Rockwell C60	Tool Steel	6648N85	000000
1"-8	UNC	Rockwell C60	Tool Steel	6648N86	000000
1"-12	UNF	Rockwell C60	Tool Steel	6648N87	000000
M1.6 × 0.35 mm	Metric	Rockwell C60	Tool Steel	6648N11	000000
M2 × 0.4 mm	Metric	Rockwell C60	Tool Steel	6648N12	000000
M2.5 × 0.45 mm	Metric	Rockwell C60	Tool Steel	6648N13	000000
M3 × 0.5 mm	Metric	Rockwell C60	Tool Steel	6648N14	000000
M3.5 × 0.6 mm	Metric	Rockwell C60	Tool Steel	6648N15	000000
M4 × 0.7 mm	Metric	Rockwell C60	Tool Steel	6648N16	000000
M5 × 0.8 mm	Metric	Rockwell C60	Tool Steel	6648N17	000000
M6 × 1 mm	Metric	Rockwell C60	Tool Steel	6648N18	000000
M8 × 1 mm	Metric	Rockwell C60	Tool Steel	6648N21	000000
M8 × 1.25 mm	Metric	Rockwell C60	Tool Steel	6648N19	000000
M10 × 0.75 mm	Metric	Rockwell C60	Tool Steel	6648N24	000000
M10 × 1.25 mm	Metric	Rockwell C60	Tool Steel	6648N23	000000
M10 × 1.5 mm	Metric	Rockwell C60	Tool Steel	6648N22	000000
M12 × 1 mm	Metric	Rockwell C60	Tool Steel	6648N28	000000
M12 × 1.25 mm	Metric	Rockwell C60	Tool Steel	6648N27	000000
M12 × 1.5 mm	Metric	Rockwell C60	Tool Steel	6648N26	000000
M12 × 1.75 mm	Metric	Rockwell C60	Tool Steel	6648N25	000000
M14 × 1.5 mm	Metric	Rockwell C60	Tool Steel	6648N31	000000
M14 × 2 mm	Metric	Rockwell C60	Tool Steel	6648N29	000000
M15 × 1 mm	Metric	Rockwell C60	Tool Steel	6648N32	000000
M16 × 1.5 mm	Metric	Rockwell C60	Tool Steel	6648N34	000000
M16 × 2 mm	Metric	Rockwell C60	Tool Steel	6648N33	000000
M17 × 1 mm	Metric	Rockwell C60	Tool Steel	6648N35	000000
M18 × 1.5 mm	Metric	Rockwell C60	Tool Steel	6648N36	000000
M20 × 1 mm	Metric	Rockwell C60	Tool Steel	6648N39	000000
M20 × 1.5 mm	Metric	Rockwell C60	Tool Steel	6648N38	000000
M20 × 2.5 mm	Metric	Rockwell C60	Tool Steel	6648N37	000000
M22 × 1.5 mm	Metric	Rockwell C60	Tool Steel	6648N42	000000
M22 × 2.5 mm	Metric	Rockwell C60	Tool Steel	6648N41	000000
M24 × 2 mm	Metric	Rockwell C60	Tool Steel	6648N44	000000
M24 × 3 mm	Metric	Rockwell C60	Tool Steel	6648N43	000000

Fixture Tables for Parts Inspection

Create a fixture setup on these tables to inspect your parts. A built-in threaded fixture plate gives you endless possibilities to attach CMM fixturing clamps and other accessories right where you need them. Labeled around the edge with letters and numbers—just like a battleship game board—it’s easy to identify holes and repeat tasks. To adjust their height slightly and move these tables around your workspace, they come with leveling casters. Tables come assembled.

Tables

Overall					Holes
Lg.	Wd.	Ht.	Wt. Cap., lb.	Plate Thk.	No. of	Ctr.-to-Ctr.	Flatness Tolerance	Frame Material	Plate Material	Wheel Configuration	Features		Each







			1/4"-20 Hole Thread Size

			47 1/4"	35 3/8"	35 3/8"	880	3/4"	1,564	1"	0.005"	Aluminum	Aluminum	Four Swivel Casters	Leveling Casters, Numbered and Lettered Holes	6365N11	000000000




					M6 Hole Thread Size

					1,200 mm	900 mm	900 mm	880	19 mm	1,645	25 mm	0.127 mm	Aluminum	Aluminum	Four Swivel Casters	Leveling Casters, Numbered and Lettered Holes	6365N12	00000000