Surface mount with the adhesive back to route low-voltage data and control cable where you can't get inside walls.

Insert and remove cable at any point along the length of this open-top, hook-shaped raceway.

With more than one channel, this raceway allows you to separate power and data wiring to prevent signal interference.

In areas exposed to washdowns, chemicals, and corrosion, install this stainless steel raceway system that has gaskets at the connection points.

Use in areas with light pedestrian traffic.

These cable ramps handle heavy pedestrian and equipment traffic.

Multiple channels let you separate different types of cable and cords.

These cable ramps are strong enough to withstand equipment traffic.

This wire duct completely encloses wire and cable.

Narrower slots and fingers create more access and routing points than on standard slotted wire duct.

Connect different sizes and genders of conduit.

Join pieces of conduit.

Use in food-processing and chemical plants—this is the most corrosion resistant thick-wall conduit we offer.

Also known as conduit bodies, these ports provide access to wire and cable inside thick-wall (rigid) metal conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run.

Join pieces of conduit.

Attach conduit to a knockout in an outlet box or enclosure.

This nonmagnetic aluminum conduit withstands damp and corrosive environments.

Join different sizes of conduit.

Connect to the end of conduit or a fitting to protect wires from abrasion when being pulled.

Join pieces of conduit.

Reduce the knockout size in an outlet box or enclosure so you can attach a different size of conduit to it.

Connect different sizes of conduit.

Also known as electrical metallic tubing (EMT), this conduit has thin walls that easily bend with a conduit bender and can be cut with a hacksaw.

Join pieces of conduit.

The most corrosion-resistant thin-wall conduit we offer, use this along walls and ceilings in food-processing and chemical plants.

Join pieces of conduit.

Transition between types of conduit.

Secure threaded metal conduit fittings to a knockout in an outlet box or enclosure.

Run conduit in food areas—the cover can be cleaned and sterilized without weakening or splitting. This conduit meets NSF/ANSI standard 169 for special-purpose food equipment.

Attach conduit to a knockout in an outlet box or enclosure.

In addition to resisting oil, this conduit resists lubricants and grease.

Join pieces of conduit.

Even in temperatures as low as -50° F and as high as 220° F, this conduit stays flexible.

In addition to continuous-motion applications such as robotics, this conduit is suitable for high-vibration applications.

One end twists into a piece of conduit for a quick connection; the other end attaches to a knockout in an outlet box or enclosure.

Made of brass, these adapters provide electromagnetic interference (EMI) protection when connecting shielded flexible plastic conduit to a knockout in an outlet box or enclosure.

Also known as antishort bushings, these grommets slide into the ends of conduit and armored cable to protect wire and cable from sharp edges.

Attach conduit to a knockout in an outlet box or enclosure.

Attach conduit to a knockout in an outlet box or enclosure.

Also known as FMC, this conduit offers the crush resistance of metal combined with flexibility to handle bends in tight spaces.

Join pieces of conduit.

Attach conduit to a knockout in an outlet box or enclosure.

Visually identify different runs of wire and cable in machine and equipment wiring.

The hinged snap-on crossbars open for access at any point along the carrier's length so you can lay in the cable and hose, rather than threading it through.

A more durable construction with a zinc-plated steel frame provides strength for a longer service life than other open cable and hose carriers.

Designed for specific robot models, these kits have all of the parts required to create a cable and hose carrier. Use them to organize and protect cable and hose without obstructing your robot’s movement.

Made of neoprene rubber, this sleeving has excellent abrasion resistance. It can be quickly applied to hose or cable like tape, so it's a good option for emergency patches.

Wrap this sleeving around cable, cords and wires to protect them and to form bundles.

Made of PTFE, this sleeving has excellent resistance to chemicals and acids. A reusable alternative to tape and cable ties, it allows you to route wire and cable between the spirals.

Made of nylon, this sleeving is the most impact- and abrasion-resistant slit corrugated sleeving we offer. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them.

This sleeving reflects heat away from contents and withstands temperatures up to 900°F. The corrugated construction gives it impact and abrasion resistance similar to conduit, but with more flexibility.

A hinge along the entire length makes this one-piece sleeving easy to open for installation. Interlocking ridges overlap along the opening to protect contents from dust and dirt. The corrugated construction gives it the impact and abrasion resistance of conduit, with more flexibility.

The two halves of this sleeving nest into each other, fully enclosing contents. It has interlocking ridges that overlap to keep out dust and dirt. The corrugated construction gives it the impact and abrasion resistance of conduit, with more flexibility.

Made of aluminum with a fiberglass liner, this sleeving reflects heat away from contents and withstands temperatures up to 390°F. A slit along the entire length makes it easy to install around wire, cable, and hose without disconnecting them.

Snaps keep this sleeving securely closed, yet permit quick access to contents and allow you to route wires in between the snaps. Use it to easily wrap around wire, cable, and hose without disconnecting them.

Organize and protect the cables on your Universal Robots arm without hindering its movement.

Silicone rubber coats this fiberglass sleeving to shed sparks and molten metal splash. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

Use this shielded sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.

The tightly braided construction makes this polyester sleeving abrasion resistant. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

A silicone rubber coating on this fiberglass sleeving protects against sparks and molten metal splash.

Add a layer of insulation to prevent electricity and heat from dissipating from wire and cable.

Use this PTFE sleeving in applications where temperatures reach up to 500° F.

Cut, bend, and connect these wire mesh tray systems to route cable and hose in configurations such as curves, slopes, and tees.

Create a system to route cable and hose by connecting components such as straight trays and tees.