With an oval bushing hole, these lightweight grips secure flat building cable, such as Romex and Festoon cable, in wet areas. All offer strain relief to extend cable life. Made of aluminum, these grips are lighter in weight than steel and brass grips yet durable. They are NEMA and IP rated, so they’ll stand up to dust, oil, washdowns, and temporary submersion in water.

Use these lightweight grips to secure cords entering knockouts at a 45° angle in wet, tight spaces while easing the stress from bending. Made of aluminum, they’re lighter in weight than steel and brass grips yet durable. All are NEMA and IP rated, so they’ll stand up to dust, oil, washdowns, and temporary submersion in water.

Keep your cord at a gentle angle without sacrificing a tight hold, even in tough, wet environments. The 45° bend reduces bending stress and saves space around your enclosure. To strengthen their grip and stop kinks, these grips have a stainless steel mesh, making them best for cords on handheld equipment, robotics, and other moving machines. They're aluminum, which is lighter than steel and brass, yet strong enough for demanding applications. All are IP and NEMA rated, so they seal out dust, oil, and water from rain, washdowns, and brief submersion to protect parts in your enclosure.

These cord grips are lightweight yet durable. As you tighten the grip, a nylon inner ring and lubricated rubber bushing secure your cable, prevent overtightening, and create a seal around the cord to block out liquid. The inner rings are colored by size so you can identify them at a glance.

Locknut and O-ring kits (sold separately) create liquid-tight seals between cord grips and enclosure knockouts. When used together with the cord grips, they meet NEMA 4X, NEMA 13, and IP66 ratings, so they can be used indoors and outdoors to protect against corrosion, dust, spraying water, oil, and coolant. Each kit includes two locknuts and one or two O-rings.

A mesh extension provides a secure hold in applications where cable is pulled or in motion. It reduces stress on the cable and prevents kinking for longer cable life. A plastic bushing seals out dust and dirt.

Stronger than aluminum cord grips, these grips are zinc plated for corrosion resistance. As you tighten the grip, a nylon inner ring and lubricated rubber bushing secure your cable, prevent overtightening, and create a seal around the cord to block out liquid.

Locknut and O-ring kits (sold separately) create liquid-tight seals between cord grips and enclosure knockouts. When used together with the cord grips, they meet NEMA 4X, NEMA 13, and IP66 ratings, so they can be used indoors and outdoors to protect against corrosion, dust, spraying water, oil, and coolant. Each kit includes two locknuts and two O-rings—enough to seal two cord grips.

Tighten the screws to secure building cable for dry locations, also known as Romex type NM-B cable, to enclosures and outlet boxes.

These cord grips are lightweight yet durable. They have a zinc-plated steel locknut and metal-reinforced rubber O-ring that prevents liquid from entering the connection. All are rated NEMA 4X, NEMA 13, and IP66 to provide indoor and outdoor protection against dust, corrosion, water projected from a hose, and oil/coolant spray.

Grips have a knurled collar for hand tightening. As you tighten the grip, a nylon inner ring and lubricated rubber bushing secure your cable, prevent overtightening, and create a seal around the cord to block out liquid. The inner ring is colored by size, so you can identify the grips’ size at a glance.

These cord grips are lightweight yet durable. They have a zinc-plated steel locknut and metal-reinforced rubber O-ring that prevents liquid from entering the connection. All are rated NEMA 4X, NEMA 13, and IP66 to provide indoor and outdoor protection against dust, corrosion, water projected from a hose, and oil/coolant spray.

Grips have a knurled collar for hand tightening. As you tighten the grip, a nylon inner ring and lubricated rubber bushing secure your cable, prevent overtightening, and create a seal around the cord to block out liquid. The inner ring has an insert that is colored by size, so you can identify them at a glance.

Stronger than aluminum cord grips, these grips are zinc plated for corrosion resistance. They have a zinc-plated steel locknut and metal-reinforced rubber O-ring that prevents liquid from entering the connection. All are rated NEMA 4X, NEMA 13, and IP66 to provide indoor and outdoor protection against dust, corrosion, water projected from a hose, and oil/coolant spray.

As you tighten the grip, a nylon inner ring and lubricated rubber bushing secure your cable, prevent overtightening, and create a seal around the cord to block out liquid.

Grips have a rubber inner grommet with multiple holes and a rubber O-ring that create a tight seal to prevent liquid from entering the connection. They are rated IP65 for protection from water projected from a nozzle and NEMA 4X for indoor and outdoor protection against corrosion and water projected from a hose.

Nylon is chemical resistant.

These grips have a thin, flexible seal that covers the holes until you push cords through. They prevent liquid from entering your connections—grips are rated IP68 for protection from continuous submersion.