McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    11 Products

    Cord Holding Type

    Cord Holding Type

    Performance

    Liquid-Tight Plastic Cord Grips

    Image of Product. Front orientation. Cord Grips. Liquid-Tight Plastic Cord Grips, Straight.
    Image of Product. Front orientation. Cord Grips. Liquid-Tight Plastic Cord Grips, 90° Elbow.

    Straight

    90° Elbow

    Block out liquid while securing cords where they enter enclosures. Sealed with an O-ring, these cord grips are IP and NEMA rated to keep out dust and water, even during washdowns. A locknut anchors them in the knockout.
    Straight
    90° Elbow
    For Cord OD
    For Knockout
    Trade Size
    Material
    Enclosure Rating
    Temp. Range,
    ° F
    For Cord
    Shape
    Specifications Met
    Features
    Each
    Each
    PG Thread
    0.51" to 0.79"PG-29NylonIP68, IP69K, NEMA 4X, NEMA 6, NEMA 12
    		-20 to 210RoundUL 94 V-0 UL 746C f1 CE Marked, CSA Certified, UL ListedNylon Plastic Locknut, Rubber O-Ring69915K126000000———0
    0.51" to 0.79"PG-29NylonIP68, IP69K, NEMA 4X, NEMA 6, NEMA 12
    		-20 to 210RoundUL 94 V-0 UL 746C f1 CSA Certified, UL ListedNylon Plastic Locknut, Rubber O-Ring———07008K26000000
    0.51" to 0.79"PG-29PVDFIP68, IP69K, NEMA 4X, NEMA 6, NEMA 12
    		-30 to 300RoundUL 94 V-0 CSA Certified, UL ListedNickel-Plated Brass Locknut, Rubber O-Ring7799K6500000———0
    0.55" to 0.98"PG-29NylonIP68, NEMA 12
    		0 to 175RoundC-UL Recognized Component, CE Marked, CSA Certified,
    TUV Rheinland Certified, UL Recognized Component    		Nylon Plastic Locknut, Rubber O-Ring7310K160000———0
    0.71" to 0.98"PG-29NylonIP68, IP69K, NEMA 4X, NEMA 6, NEMA 12
    		-20 to 210RoundUL 94 V-0 UL 746C f1 CE Marked, CSA Certified, UL ListedNylon Plastic Locknut, Rubber O-Ring69915K1400000———0
    0.71" to 0.98"PG-29NylonIP68, IP69K, NEMA 4X, NEMA 6, NEMA 12
    		-20 to 210RoundUL 94 V-0 UL 746C f1 CSA Certified, UL ListedNylon Plastic Locknut, Rubber O-Ring———07008K2500000
    0.71" to 0.98"PG-29PVDFIP68, IP69K, NEMA 4X, NEMA 6, NEMA 12
    		-30 to 300RoundUL 94 V-0 CSA Certified, UL ListedNickel-Plated Brass Locknut, Rubber O-Ring7799K6600000———0
     

    Liquid-Tight Brass Cord Grips

    Image of Product. Front orientation. Cord Grips. Liquid-Tight Brass Cord Grips.
    A bump up in strength from aluminum liquid-tight cord grips, but not as strong as stainless steel. These cord grips are nickel-plated brass, so they resist rusting from moisture. Sealed with an O-ring, they're IP or NEMA rated to block out dust and water. A locknut anchors them in the knockout.
    Straight
    For Cord OD
    For Knockout
    Trade Size
    Material
    Enclosure
    Rating
    Temp. Range,
    ° F
    For Cord
    Shape
    Specifications
    Met
    Features
    Each
    PG Thread
    0.63" to 0.99"PG-29Nickel-Plated BrassIP68
    		0 to 210RoundCE Marked
    		Nickel-Plated Brass Locknut, Rubber O-Ring9448K16000000
     

    Aluminum Cord Grips for Building Cable

    Image of Product. Front orientation. Cord Grips. Aluminum Cord Grips for Building Cable.
    Secure Romex type NM-B, festoon, and other flat building cables to enclosures. A mounting nut and gasket anchor these cord grips in the knockout.
    For
    Cord
    Wd.
    Thk.
    For Knockout
    Trade Size
    Temp. Range,
    ° F
    For Cord
    Shape
    Features
    Each
    PG Thread
    1.11"0.2"PG-290 to 210FlatMounting Nut, Rubber Gasket3120T510000000
     

    Split-Compression Liquid-Tight Plastic Cord Grips

    Image of Product. Front orientation. Cord Grips. Split-Compression Liquid-Tight Plastic Cord Grips.
    Secure Ethernet cords with RJ45 connectors and other cords that are already installed. These cord grips have a split compression seal that wraps around cords without having to push the connector through. IP and NEMA rated, they block out dust and water, even during washdowns. A locknut anchors them in the knockout.
    When choosing a size, make sure the body ID is large enough for the end of your cord to fit through with the connector.
    ID
    Straight
    For Cord OD
    For Knockout
    Trade Size
    Body
    Sealing
    Nut
    Material
    Enclosure
    Rating
    Temp. Range,
    ° F
    For Cord
    Shape
    Specifications Met
    Features
    Each
    PG Thread
    0.25" to 0.33"PG-290.98"1.01"NylonIP68, NEMA 6P
    		0 to 210RoundUL 94 V-2 C-UL Recognized Component, UL Recognized ComponentNylon Plastic Locknut, Split Gland5302N11700000
     

    Screw-Down Liquid-Tight Plastic Cord Grips

    Image of Product. Front orientation. Cord Grips. Screw-Down Liquid-Tight Plastic Cord Grips.
    For an extra-secure hold, these cord grips have both a compression seal and a clamp that screws down onto your cord when tightened. They're sealed with an O-ring, making them IP and NEMA rated to block out dust and water, even during washdowns. A locknut anchors them in the knockout.
    Straight
    For Cord OD
    For Knockout
    Trade Size
    Material
    Enclosure Rating
    Temp. Range,
    ° F
    For Cord
    Shape
    Specifications Met
    Features
    Each
    PG Thread
    0.71" to 0.98"PG-29NylonIP68, IP69K, NEMA 4X, NEMA 6
    		0 to 155RoundUL 94 V-0 CE Marked, DNV-GL Type ApprovedNylon Plastic Locknut, Rubber O-Ring1013N216000000
     
    back to top