Carry these boxes from job to job and mount them near equipment to lock out valves, electrical controls, and other machines with fewer padlocks, saving your team time. With these lockout boxes, you only need one padlock to lock out each piece of equipment. The keys for those padlocks are locked in this box and aren’t accessible until your team removes all the padlocks from the box. All boxes help you comply with OSHA requirements for controlling hazardous energy.

Boxes with a document display let you view checklists and permits as you lock out equipment, reducing the risk of injury. They stand up to outdoor and other wet environments, since they’re stainless steel with an IP rated gasket to protect documents. The windows are made of polycarbonate to resist impacts, so you can’t break into the box to access padlocks or keys. Write down permit and work order numbers on the erasable tag.

Secure a single breaker switch with multiple padlocks, so electricity stays safely off until everyone's done working. The key that unlocks these lockouts is at the end of a 2-ft. cable—wind it through the lock mount and secure by adding a padlock for each person working. The key is released only when all padlocks are removed.

Less disruptive than turning off an entire panel, these lockouts isolate a single circuit, keeping power flowing elsewhere. And because they're small and don't actually hold the padlocks, you'll still have room in your breaker box to flip adjacent switches on and off and even close the panel door.

Circuit breaker lockouts such as these help your organization comply with OSHA 29 CFR 1910.147, which requires electrical circuits to be locked out during maintenance in order to prevent injuries.

Lock out a machine with fewer padlocks when a team is working. After locking one padlock to each electrical control and placing the keys in the box, workers lock their own padlocks to the box. The keys are only accessible when all the workers remove their padlocks for group safety. They help you comply with OSHA 29 CFR 1910.147 procedures for the control of energy sources that could injure workers.

Lock out a machine with fewer padlocks when a team is working. After locking one padlock to each electrical control and placing the keys in the box, workers lock their own padlocks to the box. The keys are only accessible when all the workers remove their padlocks for group safety. This box has a window for viewing contents. It helps you comply with OSHA 29 CFR 1910.147 procedures for the control of energy sources that could injure workers.

Thread the free end of the cable through the looped end and into the lockout clamping hole; pull tight and close handle to pinch the cable for a secure fit. These flexible cables wrap around and through panel boxes, freestanding equipment, and multiple gate valves to keep them inoperable. All are nylon coated so they won't mar surfaces. They help you comply with OSHA 1910.147 procedures for the control of energy sources that could injure workers.

For technical drawings and 3-D models, click on a part number.

After locking, pull the cable tight for a secure fit. This flexible cable wraps around and through panel boxes, freestanding equipment, and multiple gate valves to keep them inoperable. It includes write-on labels and is plastic coated so it won't mar surfaces. It helps you comply with OSHA 29 CFR 1910.147 procedures for the control of energy sources that could injure workers.

Extend the cable and place its loop in the body opening. Rotate the body to lock the cable for a secure fit. When unlocked, the cable retracts into the body with the push of a button. This flexible cable wraps around and through panel boxes, freestanding equipment, and multiple gate valves to keep them inoperable. It helps you comply with OSHA 29 CFR 1910.147 procedures for the control of energy sources that could injure workers.

With a smaller overall length, these lockout hasps fit in tighter spaces than other lockout hasps yet still hold a similar number of locks. Use them to lock out a single energy control on machinery and electrical equipment so it can't be used. They help you comply with OSHA 29 CFR 1910.147 procedures for the control of energy sources that could injure workers.

For technical drawings and 3-D models, click on a part number.

Sets contain items for group electrical and valve lockouts and are furnished in a case or box that mounts to the wall to keep the items organized in a central location. The padlocks, hasps, and lockouts are red. They help you comply with OSHA 29 CFR 1910.147 procedures for the control of energy sources that could injure workers.

Sets contain items for group electrical and valve lockouts and are furnished in a yellow plastic case that mounts to the wall to keep the items organized in a central location. The padlocks, hasps, and lockouts are red. They help you comply with OSHA 29 CFR 1910.147 procedures for the control of energy sources that could injure workers.