Bundle cables outdoors with these ties that withstand exposure to UV rays and water.

The hook and loop on these ties holds more tightly than other hook and loop.

These cable ties are easy to yank apart or cinch shut, even when wearing gloves—a textured tab on the end gives you a good grip.

Ties are made from heat-resistant fabric to withstand high temperatures.

Create custom-length ties from a roll with hook on one side and loop on the other.

Flexible enough for small bundles, these ties are often used for electronics.

Take the guesswork out of identifying material—use the attached tag to label the bundle.

Attach with a screw or other fastener.

Feed a bundle through the closed loop and wrap the ends around pipe or conduit for support.

Stick these ties to any smooth, clean surface.

Add a hook and loop cable tie to these mounts to secure a bundle.

Woven from flexible stainless steel yarn and Nomex, these ties handle temperatures up to 850° F.

Multiple tension settings ensure a precise fit around the bundle.

A foam padded back combined with an extra-wide body protects sensitive bundles, such as fiber optic cable.

Keep an assortment of cable ties on hand.

Attach these cable ties directly to a surface—no separate mount needed.

These ties are less likely to crack and break from dryness than regular cable ties.

The rounded, low-profile head keeps these ties from snagging and allows them to fit in tight spaces.

Pull the tab to tear off these cable ties.

For use in environments subjected to chemicals, these ties withstand the most corrosive conditions.

These cable ties have a finely ribbed body and a metal-toothed head that allows them to adjust to the exact size of the material without slipping.

Whether you plan to change the bundle size or need a temporary hold, these ties have a release tab for removal and reuse.

Protect sensitive electronic equipment from static buildup.

These cable ties come with a material certificate with traceable lot number and product shelf life.

Identify bundles at a glance.

Use these plastic cable ties when detection and retrieval are essential, such as in food processing applications. Ties are brightly colored for visibility and contain a special compound that can be picked up by X-ray equipment and metal detectors.

Create custom-length cable ties for large bundles and heavy materials.

Mount to a surface and add a cable tie to secure a bundle.

Prevent wear to bundles by mounting these spacers between two bundles.

Use these plastic mounts with metal-detector-grade cable ties when detection and retrieval is essential, such as in food processing applications. Mounts are brightly colored for visibility and contain a special compound that can be picked up by X-ray equipment and metal detectors.

These mounts create space between a bundle and surface.

Add push-in cable holder to this adapter to mount cable to DIN rail.

Mount to a surface to secure and route cable.

Mount to a surface and add a beaded cable tie to secure a bundle.

For use in the harshest environments, these ties withstand chemicals and UV rays.

Use these mounts with stainless steel cable ties when working in corrosive environments.

Prevent metal cable ties from damaging cable with these cushions that cover the edges of a tie.

These ties have a loop on each end that can be twisted around each other for a secure closure.

Create custom-length ties for bundling delicate materials.

A hard rubber coating and wire core helps these ties maintain their shape.

Secure large bundles such as lumber, cardboard, and wire coils.

Create strong and durable custom-length ties with a hard rubber coating and wire core.

These ties are wide and flat for a no-slip grip.

A cushion covering the clamp reduces vibration and wear from clamp edges. Clamps surround lines of pipe, tubing, and conduit completely while holding them close to the mounting surface.

A molded cushion reduces vibration and wear from clamp edges, plus it provides a tighter fit around material than standard vibration-damping loop clamps.

Organize multiple lines of pipe, tubing, and conduit with one clamp. Wider than standard loop clamps, multiline loop clamps surround two lines of material to create a secure grip while holding the lines close to the mounting surface.

For use with a single line, these clamps brace pipe, tubing, and conduit directly against the mounting surface.

Secure insulated pipe to strut channel without pinching the insulation or exposing the pipe. These clamps are sized for use with insulated pipe and have a plastic insert that creates a seal around the insulation to prevent the pipe from sweating, which can cause mold and corrosion.

Secure two pressurized hydraulic lines with a single clamp. Mount these clamps directly onto rails, no adhesive or welding required. They fit tightly around the lines to reduce vibration.

For use with a single line, these clamps mount directly onto rails, no adhesive or welding required. They fit tightly around pressurized lines in hydraulic systems to lessen vibration.

Bolt or weld these rails to the mounting surface, then attach clamps with a rail nut.

Route two lines of tubing with a single clamp. Commonly used in compressed air systems, these polypropylene clamps withstand moisture and most chemicals. They have a folding arm that closes to secure material.

Join these clamps together to line up multiple pipes, cables, or tubes side-by-side, even when they are different sizes.

Flexible grooves inside these polypropylene clamps allow material to expand and contract. Clamps are moisture and chemical resistant.

Backed with foam adhesive tape, these clamps mount to any smooth surface—no fasteners required. They are noncorrosive, nonconductive nylon.

Also known as clevis hangers, these have a pivoting loop that adjusts for line movement and vibration. Combine with a threaded rod or other fastener to hang from the ceiling.

Also known as pipe shields, these cradles provide additional support and prevent insulation from tearing when routing insulated pipe through loop hangers.

A roller on the bottom of these hangers compensates for movement due to expansion and contraction, such as in hydraulic applications. Combine with a threaded rod or other fastener to hang from the ceiling.

A time-saving alternative to strap hangers, these hangers fit a range of material sizes without any cutting and easily adjust after they’re installed.

Load material between the two halves of the ring and adjust the side bolts for a tighter fit than standard threaded-rod-mount clamping hangers.

These hangers provide maximum corrosion resistance in wet environments and stand up to frequent washdowns with harsh cleaners and sanitizers. Rounded edges, polished surfaces, and acorn or hex nuts that conceal threads reduce the number of places for bacteria to grow and make them easier to clean.

Lock your line in faster than any other hanger. These hangers automatically close when you press your line into the clamp.

Connect these hangers to organize multiple lines of pipe, tubing, and conduit. The tight-fitting, santoprene body reduces vibration and prevents corrosion caused by metal-to-metal contact.

Route multiple lines of pipe, tubing, and conduit with a single hanger. A wide opening and locking tab allow access for installation, adjustment, and removal.

Mount these beams across parallel roof joists to hang threaded rod and route pipe, duct, and other overhead systems in areas where there’s no anchoring point.

Cut as much strap as you need to hang duct, pipe, and other materials.

Keep multiple bundles of wire and cable on separate hooks. The hooks have wide openings to allow access for installation, adjustment, and removal.

Anchor these ringbolts where you need them, then remove the ring when not in use. Once installed, the mounting bolt stays in place. Insert the ring by threading into the mounting bolt; remove by unthreading it.

Hang cable and other flexible material beneath wire to prevent it from sagging and swaying. To install, hook the two ends of the ring around the wire—no fasteners required.

A durable rubber cushion and mounting plate prevent corrosion and wear caused by metal-to-metal contact. The mounting plate is removable, so the U-bolts can be installed onto an existing line without needing to dissemble it.

Reduce vibration and noise in your lines—a plastic cushion tightly grips pipe, tubing, and conduit to prevent movement. Nylon-insert locknuts grip the thread to resist loosening.