We will reply to your message within an hour.
More
More portable than air-powered options, these guns operate on a rechargeable battery.
Because of their one-hand operation, pistol-grip grease guns are easier to use for adding grease to hard-to-reach places than lever-grip guns.
Be sure you’re using the right grease—this gun has a clear barrel for identification at a glance.
Prime these guns faster than standard grease guns and use them with just one hand.
Turn a small tube of grease into a dispenser.
Dispense small amounts of grease with one of these compact guns.
Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.
Ensure that only food-grade grease is used in controlled areas—this gun only works with compatible food-grade grease cartridges.
Protect sensitive parts, such as motor and bearing seals, from damage by monitoring the pressure of the grease you’re dispensing.
These guns deliver twice as much grease per stroke than standard lever-grip guns.
Dispense grease with the highest-pressure-rated gun we offer.
Dispense small amounts of grease with this compact gun.
Dispensing more grease per pump than pistol-grip guns, lever-grip guns are better for applications that require high grease output.
Start greasing faster than standard grease guns and continue with the high output of a lever grip.
Designed to lubricate linear motion components, such as slide bearings, guides, and ball screws, these guns work exclusively with THK grease cartridges and fittings.
This gun comes filled with 2 oz. of lithium-thickened grease.
Deliver small amounts of grease with only a light push against the lubrication point.
These flexible nozzles have threads on both ends for connecting a grease gun to a dispensing tip.
With threads on both ends, these rigid nozzles connect grease guns to dispensing tips.
These flexible nozzles come with a dispensing tip and have threads on one end for connecting to a grease gun.
Slide the metal sleeve up to the tip for rigidity. Slide it back down to expose the flexible nozzle.
Penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.
These rigid nozzles come with a dispensing tip and have threads on one end for connecting to a grease gun.
Sets include dispensing tips for grease fittings and bare lubrication points.
Dispense from grease guns into grease fittings and bare lubrication points.
These flexible extensions have a quick-disconnect fitting that snaps into your dispensing tip, so you can lubricate grease fittings that are hard to reach.
Convert dispensing tips with male threads into quick-disconnect couplings.
These rigid tip adapters penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.
Lubricate standard grease fittings in hard-to-reach areas. Extensions have a quick-disconnect fitting that snaps into your dispensing tip for standard grease fittings.
Increase the pressure of your grease system when necessary to dispense thick grease and force grease through clogged fittings.
A display allows you to monitor how much grease is dispensed.
Move grease-dispensing guns in any direction without kinking the outlet hose.
Connect these guns to container-mount dispensers for controlled dispensing.
Use suction to remove old lubricant from gear boxes and transmissions.
Deliver a mist of oil using shop air.
Clamp this applicator around control cables to lubricate them with minimal mess.
These dispensers have an opening for filling without removing the nozzle.
Pull the trigger on these oilers for easier one-hand operation than standard hand-held oil dispensers.
A needle dispensing tip provides fine control for lubricating small parts.
Measure oil as it's dispensed.
Screw this dispenser to the top of most 8-oz. and 1-lb. brush-top antiseize lubricant cans. It has a trigger and a brush-tip nozzle that allow neat and easy one hand dispensing.
Use this general purpose grease to lubricate most machinery.
Remove worn fittings and repair threaded holes.