We will reply to your message within an hour.
More
Designed for indoor applications, these cords are often used to power appliances.
These self-coiling cords stretch to full length and then return to their retracted length for tangle-free storage.
Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.
After a power failure, these cords must be manually reset, preventing unexpected equipment startup.
Use these cords with computers, lab equipment, and office machines that have IEC connections.
The shielding blocks signal interference from nearby equipment and devices.
Create a vibration-resistant connection—the socket on these cords locks onto any male receptacle and will not detach until manually unlocked.
Power multiple devices from one power source.
Plug these cords into fans that have quick-disconnect terminals.
These cords work with any Milwaukee tool with a pin socket (Quik-Lok) connection.
Plug these cords into a vehicle socket to charge devices that run on AC voltage.
The insulation on these cords resists water, so they can be used outdoors.
The insulation resists water, oil, and chemicals, so these cords withstand dirty and greasy environments.
Run these cords through high-traffic areas that are dirty and greasy. They have a thick insulation that resists water, oil, and chemicals, and protects against abrasion.
Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.
Keep personnel safe from electric shock with these cords.
Insulated to resist water, oil, and solvents, these cords withstand dirty and greasy environments.
Designed for indoor use, these cords are often used to power appliances.
Power multiple devices with one extension cord.
In addition to an outlet on the end, these cords have multiple inline outlets.
These self-coiling cords return to their retracted length after stretching for tangle-free storage.
Also known as hospital-grade cords, these have extra-tight connections to prevent them from detaching. The connectors are marked with a green dot.
A locking lever on the female socket prevents your device from disconnecting.
Change the connection style between an outlet and your equipment.
Attach these splitters to an extension cord to power multiple devices from one cord.
Often used in offices and workstations, these outlet strips power multiple devices from a single wall outlet.
Save energy by automatically turning off unused outlets. The master outlet controls five outlets and shuts off power to the other outlets when a device plugged into the master is turned off.
Separately control each device plugged into these strips—each outlet has its own power switch.
The power switch to these outlet strips is on a 44" long cord, so you can control power even when the strips are in hard to reach places, such as under a desk.
Keep personnel safe from electric shock with ground fault protection.
An isolated ground connection on these outlets protects computers and other sensitive equipment from external signals that interfere with the equipment’s performance.
A combination of an outlet box, cord, and duct, these outlet strips minimize tripping hazards and protect the cord from damage.
Also known as hospital-grade outlet strips, these outlets have an extra-tight fit to prevent plugs from detaching. They are marked with a green dot.
With a rubber housing, these outlet strips withstand drops and other impact.
Mount these outlet strips to a desktop or workbench with the mounting hardware, or set them on a surface.
These curved outlet strips clamp onto a pole or table leg.
Install these extra-long strips onto the frame of an electrical cabinet.
Mount these strips into standard 19" wide electronics racks and enclosures.
When mated, connectors meet NEMA 6P, NEMA 12, and either IP67 or IP69K.
The thermostat automatically turns these heaters on when the temperature drops below 38° F and turns them off when the temperature reaches 45° F.
There’s no need for power-connection kits with these finished lengths of cable.