We will reply to your message within an hour.
Designed for indoor applications, these cords are often used to power appliances.
After a power failure, these cords must be manually reset, preventing unexpected equipment startup.
All cords have a country-specific plug to power equipment from international outlets.
Use these cords with computers, lab equipment, and office machines that have IEC connections.
All cords have a country-specific plug on one end and an IEC socket on the other end.
Create a vibration-resistant connection—the socket on these cords securely locks onto any male receptacle and will not detach until manually unlocked.
Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.
Create a vibration-resistant connection—the socket on these cords locks onto any male receptacle and will not detach until manually unlocked.
Power multiple devices from one power source.
Plug these cords into fans that have quick-disconnect terminals.
The threaded ends on these cords seal out contaminants and resist coming loose from vibration in tough industrial environments and automated systems while sending power and signal to devices with M12 connections.
FDA compliant for direct contact with food, these cords are safe to use with 12 mm proximity switches, valves, and power supplies in food, beverage, and pharmaceutical applications.
Hardwire these cords to equipment.
Plug these cords into computers, lab equipment, and office machines that have IEC connections.
Run these cords through high-traffic areas that are dirty and greasy. They have a thick insulation that resists water, oil, and chemicals, and protects against abrasion.
Use these cords where ignitable gas and dust may be present. They're CSA certified for Class I, Divisions 1 and 2, Groups B, C, and D; and Class II, Divisions 1 and 2, Groups F and G hazardous environments.
Keep personnel safe from electric shock with these cords.
Change the connection style between an outlet and your equipment.
These cords have an oil- and water-resistant insulation and impact-resistant connectors for protection in harsh environments.
Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.
Attach these splitters to an extension cord to power multiple devices from one cord.
Because they tightly thread to M12 connections, these connectors won’t let contaminants in or come loose from vibration in rugged industrial environments and automated systems as they send power and signal or just power to your equipment.
Send power and signal to devices with M12 connections that are exposed to some of the toughest industrial stresses—from welding to metal machining and changing temperatures.
Quickly mate these connectors by pushing them together. They're often used with 12 mm proximity switches and valves in automated systems.
Plug these connectors into hazardous location devices. Using a NAMUR signal, they operate at a low current and voltage, so they prevent the risk of sparks and ignition in volatile areas.
Push these connectors together to quickly create signal and data connections in tight spaces. They need less space to mate than screw-together connectors, which require two hands to twist them in place.
These connectors are designed for use in audio equipment.