Core Holders | McMaster-Carr

Filter by

Width

Spool ID

Material

Color

RoHS

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

Number of Spool Holders

Tape Width

REACH

Performance

Height

For Use With

Mounting Location

Overall Width

Measuring Component

Length

Coil Length Capacity @ Material Thickness

For Maximum Spool OD

Power Source

Number of Storage Levels

Overall Depth

Overall Height

Housing Material

For Maximum Tape Roll Diameter

99 Products

Static-Control Tape Dispensers


1 Spool Holder Plastic Housing	1 Spool Holder Metal Housing

2 Spool Holders Metal Housing	3 Spool Holders Metal Housing

To protect sensitive equipment from static buildup, these tape dispensers have a conductive housing and nonskid base that grounds electrical charges by letting them pass through. Also known as electrostatic discharge (ESD) safe tape dispensers, they’re often used in electronics assemblies. They meet ANSI standards for protection from electrostatic discharge, so they are approved for use in ESD control programs in the U.S.

2 Spool Holders—Dispensers with two spool holders hold two 1" wide tape rolls or one 2" wide roll.

3 Spool Holders—Dispensers with three spool holders hold three 1" wide tape rolls or any combination up to 3" wide.

Dispensers														Replacement Blades		Replacement Blade Covers
	For Tape											Tape Not Included
No. of Spool Holders	Max. Wd.	Max. Roll Dia.	For Spool ID	Lg.	Wd.	Ht.	Housing Material	Features	Color	Surface Resistivity, ohm/sq.	Specs. Met		Each		Each		Each
1	1"	2 1/2"	1"	7 1/2"	3"	3 1/2"	Plastic	Nonskid Base, Weighted Base	Black	1× 10^5	ANSI/ESD S20.20	4744N21	000000	———	0	———	0
1	1"	5"	3"	9"	2 1/4"	5"	Metal	Nonskid Base, Weighted Base	White	1× 10^9	ANSI/ESD S20.20	4744N11	00000	4744N12	000000	4744N13	000000
2	2"	5"	3"	9"	3 1/4"	5"	Metal	Nonskid Base, Weighted Base	White	1× 10^9	ANSI/ESD S20.20	4744N14	00000	4744N15	00000	4744N16	00000
3	3"	5"	3"	9"	3 1/2"	5"	Metal	Nonskid Base, Weighted Base	White	1× 10^9	ANSI/ESD S20.20	4744N17	00000	4744N18	00000	4744N19	00000

Label Dispensers

Increase labeling speed and keep labels clean and organized until you’re ready to apply. Roll capacity varies; the total width cannot exceed the maximum label width.

Wall Mount

Roll ID Adapters—Roll ID adapters allow the back-mount dispensers to hold rolls with a 3” ID.

Label Dispensers													Roll ID Adapters
	For Roll							Mounting
For Max. Label Wd.	ID	Max. OD	Ht.	Wd.	Dp.	Material	Color	Fasteners Included	No. of Holes	Hole Dia.		Each	Pkg. Qty.		Pkg.
4 1/2"	1"	6 1/2"	8 5/8"	4 7/8"	4 1/2"	Steel	Beige	No	4	3/8"	85925T64	000000	2	85925T92	000000
8 1/2"	1"	6 1/2"	8 5/8"	8 7/8"	4 1/2"	Steel	Beige	No	4	3/8"	85925T66	000000	2	85925T92	00000

Tape Dispensers

These dispensers have interchangeable spool holders to accommodate tape with 1" and 3" spool IDs. Use with office tape and masking tape.

Dispensers											Replacement Blades		Replacement Spool Holders
For Tape									Tape Not Included
Max. Wd.	Max. Roll Dia.	For Spool ID	Lg.	Wd.	Ht.	Housing Material	Features	Choose a Color		Each		Each		Each
1"	4 1/2"	1", 3"	8"	3 1/4"	4 1/2"	Plastic	Nonskid Base	Black, Brown	76355A21	000000	76355A51	00000	76355A52	00000

Solder Spool Holders


Adhesive Mount	Slide-On Mount Soldering Iron Tip Holder	Freestanding Mount, Desoldering Tool Holder	Freestanding Mount Solder Wire Guide

Keep your solder spools organized.

ESD (Electrostatic Discharge) Safe—ESD (electrostatic discharge) safe holders don’t create ESD, so they protect sensitive components.

	For Max. Spool Dia.	For Slot Wd.	Material	Features		Each
Adhesive Mount



	1	3 1/2"	—	Plastic	ESD (Electrostatic Discharge) Safe	7706A67	000000


	Slide-On Mount



			1	2 1/4"	0.875"	Plastic	Soldering Iron Tip Holder	7706A13	00000


			Freestanding Mount



					1/4	2 1/4"	—	Plastic	Desoldering Tool Holder, ESD (Electrostatic Discharge) Safe	7706A14	00000


					2 1/4	—	—	Steel	Solder Wire Guide, ESD (Electrostatic Discharge) Safe	7706A11	00000

Extension Reels

		Mounting Holes
Screw In	No	2	0.205"	Steel	7706A12	000000

Automatic Select-a-Length Tape Dispensers

Dispense each piece at the touch of a button, or set these dispensers to advance a set length of tape automatically so a new piece is always ready.

With Push Button Control

Dispenser with push-button control dispenses tape to one of three selectable lengths. It can also run on three D batteries. Use with office tape and masking tape.

Dispensers													Replacement Blades		Replacement Spool Holders
For Tape											Tape Not Included
Min. Wd.	Max. Wd.	Max. Roll Dia.	For Spool ID	Lg. Dispensed	Lg.	Wd.	Ht.	Housing Material	Features	Color		Each		Each		Each
1/4"	1"	5 1/4"	1", 3"	1 3/16", 1 3/4", 3 9/16"	6 3/4"	3 3/4"	4 1/2"	Plastic	Continuous Mode	Black	76365A31	0000000	76365A13	00000	76365A65	00000

With Keypad Control

Dispenser with keypad control dispenses and cuts tape to any set length. Use with office tape, masking tape, and reinforced tape.

Dispensers													Replacement Blades			Replacement Spool Holders		Replacement Body Covers		Replacement Circuit Boards		Replacement Feed Rollers
For Tape											Tape Not Included
Min. Wd.	Max. Wd.	Max. Roll Dia.	For Spool ID	Lg. Dispensed Range	Lg.	Wd.	Ht.	Housing Material	Features	Color		Each	Pkg. Qty.		Pkg.		Each		Each		Each		Each
9/32"	2"	7"	1", 1 1/2", 3"	3/4" to 39"	9 3/4"	5 1/2"	6"	Plastic	Continuous Mode, LED Display	Black	76655A26	0000000	2	76655A34	000000	76655A32	000000	76655A35	000000	76655A31	0000000	76655A33	000000

Build-Your-Own Wire, Rope, and Cord Length Measurers

Combine a counter, feeder reel, coiler reel, and stand to create a wire, rope, and cord length measurer.

Counters


Counter for Cords and Rope	Counter for Wire, Cable, and Hose	Counter for Wire	Counter for Wire with Cutter

Counters measure material as you thread it through the internal wheels. These counters add and subtract. Mount them on a pedestal or floor stand (sold separately).

Polyurethane-Coated Steel Wheel—Polyurethane-coated wheels are for PTFE-coated wire and fiber-optic cable.

	Material OD		Each
Feet/Inches







	Steel Wheel

	Cords, Rope	9,999	—	1/4" to 3/4"	1686T221	0000000


	Wire	9,999	—	1/64" to 7/8"	1686T151	000000
	Wire	9,999	Cutter	1/64" to 7/8"	1686T311	000000
	Wire, Cable, Hose	99,999	—	1/8" to 2"	1686T371	00000000




			Polyurethane-Coated Steel Wheel

			Wire	9,999	—	1/64" to 7/8"	1686T771	00000000


			Wire	9,999	Cutter	1/64" to 7/8"	1686T781	00000000
			Wire, Cable, Hose	99,999	—	1/8" to 2"	1686T791	00000000

Reels


Feeder Reels	Coiler Reels

Feeder Reels—Feeder reels hold material before it's threaded through a counter. Wind material around adjustable pins on the reel, or place spooled material on the _1/2" diameter spindle.

Coiler Reels—Coiler reels gather material once it has passed through a counter. These reels have a hand crank and collapse for storage.

	For Coil ID
	Min.	Max.	For Max. Coil OD	Coil Lg. Cap. @ Material Thk.	Coil Wt. Cap., lb.	For Use With	Mounting Location	Includes		Each
Feeder Reels



		6 1/2"	10 1/2"	15"	—	75	Cords, Rope, Wire, Cable, Hose	Bench	Bench-Mount Pedestal	1686T51	0000000


		6 1/2"	18 1/2"	25"	—	120	Cords, Rope, Wire, Cable, Hose	Bench	Bench-Mount Pedestal	1686T651	000000


		Coiler Reels



				—	8"	—	120 ft. @ 1/2", 475 ft. @ 1/4"	50	Cords, Rope, Wire, Cable, Hose	Bench	Bench-Mount Pedestal	1686T121	000000


				—	8"	—	120 ft. @ 3/8", 70 ft. @ 1/2"	40	Cords, Rope, Wire, Cable, Hose	Bench	Bench-Mount Pedestal	1686T421	000000
				—	12"	—	120 ft. @ 3/4", 270 ft. @ 1/2"	75	Cords, Rope, Wire, Cable, Hose	Bench	Bench-Mount Pedestal	1686T661	000000
				—	12"	—	975 ft. @ 1/2"	75	Cords, Rope, Cable, Hose	Bench	Bench-Mount Pedestal	1686T241	000000
				—	16"	—	100 ft. @ 1", 190 ft. @ 3/4"	100	Cords, Rope, Wire, Cable, Hose	Bench	Bench-Mount Pedestal	1686T251	000000

Stands


Bench-Mount Pedestal	Floor-Mount Stand for Cords, Rope, and Wire	Stands For Cords For Rope For Wire Floor Mount 49" Maximum Height	Stands For Wire For Cable For Hose Floor Mount 49" Maximum Height

Measuring Component	For Use With	Mounting Location	Ht.		Each
Pedestal	Cords, Rope, Wire	Bench	14"	1686T171	000000
Stand	Cords, Rope, Wire	Floor	24"	1686T961	000000
Stand	Cords, Rope, Wire	Floor	31" to 49"	1686T223	00000000
Stand	Wire, Cable, Hose	Floor	31" to 49"	1686T321	00000000

Extension Cord Reels with Outlets


With NEMA 5-15 Outlets	NEMA 5-15 Outlet

These cord reels have a resettable circuit breaker to prevent overload damage. Connect an extension cord to the outlets on the reel.

NEMA 5-15—Reels with NEMA 5-15 outlets don't include a power cord, but do have a plug for connecting an extension cord. Use the extension cord to connect the reel to a power source.

	No. of Outlets	Winding Method	Housing Material	Current, amp	Voltage, V AC	Electrical Protection Type	Lg.	Wd.	Ht.	Features	Certification	Color		Each
NEMA 5-15 Outlet and Power Connection with NEMA 5-15 Plug In



	100 ft. @ 12 AWG	4	Manual	Steel	15	120	Circuit Breaker	13 3/4"	11 1/4"	17 3/4"	Carrying Handle, Power-Indicating Light	ETL Listed, C-ETL Listed	Yellow	9346T6	0000000

Hardwire Extension Cord Reels with Outlets


	NEMA 5-15 Outlet

Attach the wires in a power cord to these reels for a permanent connection, then plug an extension cord into the reel’s outlets. Outlet covers keep out water and dust when not in use. Set the brake to prevent cords from unwinding.

	No. of Outlets	Winding Method	Housing Material	Current, amp	Voltage, V AC	Lg.	Wd.	Ht.	Features	Color		Each
NEMA 5-15 Outlet and Power Connection with Screw Terminals



	100 ft. @ 12 AWG	2	Manual	Steel	15	120	11 7/8"	13 1/2"	14 3/4"	Brake, Carrying Handle, Outlet Covers, Rubber Feet	Gray	73015K31	0000000

Mobile Spool Racks

Transport all your spools at the same time or use as a hand truck when spools are removed. Two wire guides on the handle allow for controlled dispensing. Spindles can be repositioned to accept different reel sizes.

		Overall						Spindle
	No. of Storage Levels	Wd.	Ht.	Dp.	Wt. Cap. per Storage Level	Overall Wt. Cap., lb.	For Max. Spool OD	Dia.	Lg.	Color	Spindle Material	Spindle Color	Wheel Dia.	Wheel Material		Each
Powder-Coated Steel



		5	18 1/2"	45"	22"	Not Rated	700	24"	11/16"	19"	Red	Powder-Coated Steel	Red	8"	Rubber	22395T8	0000000

Mobile Spool Racks with Adjustable Spindles

Shaft collars secure the spools on the spindles.

		Overall							Spindle
	No. of Storage Levels	Wd.	Ht.	Dp.	Wt. Cap. per Storage Level, lb.	Overall Wt. Cap., lb.	For Min. Spool ID	For Max. Spool OD	Dia.	Lg.	Color	Spindle Material	Caster Type	Wheel Dia.	Wheel Material		Each
Powder-Coated Steel



		6	48"	70"	32"	50	600	7/8"	24"	3/4"	44"	Gray	Aluminum	Four Swivel (Two with Brakes)	3"	Polyurethane Rubber	8762T48	0000000

Easy-Carry Spool Racks

		Overall						Spindle
	No. of Storage Levels	Wd.	Ht.	Dp.	Wt. Cap. per Storage Level	Overall Wt. Cap., lb.	For Max. Spool OD	Dia.	Lg.	Color	Spindle Material		Each
Powder-Coated Steel



		1	25"	7 1/2"	8"	Not Rated	50	7"	5/8"	23"	Black	Galvanized Steel	22315T61	000000


		1	25"	11 1/2"	8"	Not Rated	70	11"	5/8"	23"	Black	Galvanized Steel	22315T62	00000

Extension Cord Storage Reels

Store and transport cords. Set the brake to prevent cords from unwinding.

Winding Method	Housing Material	Lg.	Wd.	Ht.	Features	Color		Each



100 ft. @ 12 AWG	Manual	Steel	11 7/8"	10 3/4"	14 3/4"	Brake, Carrying Handle, Rubber Feet	Gray	7069K13	0000000


250 ft. @ 12 AWG	Manual	Steel	15 1/2"	15"	19"	Brake, Carrying Handle, Rubber Feet	Gray	7069K15	000000

Heavy Duty Tape Dispensers

Larger and heavier than standard tape dispensers, these work with office tape, masking tape, and reinforced tape.

Dispensers											Replacement Spool Holders
For Tape									Tape Not Included
Max. Wd.	Max. Roll Dia.	For Spool ID	Lg.	Wd.	Ht.	Housing Material	Features	Color		Each		Each
1"	5 1/2"	3"	10"	3 3/4"	5 1/4"	Plastic	Nonskid Base	Beige	7635A2	000000	7635A65	000000

Stay-Flat Spools for Arbor-Mount Sanding Discs


Sanding Discs Not Included

Stack and store your extra arbor-mount sanding discs so they stay flat. The top plate of these spools locks down and presses discs to prevent the fiber backing from curling.

				For 5" Diameter Disc		For 7" Diameter Disc
For No. of Discs	For Disc Abrasive Backing Material	Overall Ht.	Material		Each		Each



	100	Fiber	9 3/8"	Plastic	7856N11	000000	7856N12	000000

Wall-Mount Spool Racks

		Overall						Spindle				Mounting Holes
	No. of Storage Levels	Wd.	Ht.	Dp.	Wt. Cap. per Storage Level, lb.	Overall Wt. Cap., lb.	For Max. Spool OD	Dia.	Lg.	Color	Spindle Material	No. of	Dia.	Mounting Fasteners Included		Each
Powder-Coated Steel



		2	26 1/2"	21 1/2"	6"	60	120	7"	5/8"	25 3/4"	Gray	Steel	4	3/8"	No	4702T12	000000


		4	26 1/2"	36 1/2"	6"	60	240	7"	5/8"	25 3/4"	Gray	Steel	4	3/8"	No	4702T11	000000

Light Duty Tape Dispensers

Designed for use with office tape.

Dispensers											Replacement Blades		Replacement Spool Holders
For Tape									Tape Not Included
Max. Wd.	Max. Roll Dia.	For Spool ID	Lg.	Wd.	Ht.	Housing Material	Features	Choose a Color		Each		Each		Each
1"	2 1/2"	1"	7"	3 1/4"	2 3/4"	Plastic	Nonskid Base	Beige, Black, Brown	7636A22	00000	7636A23	00000	7636A24	00000

Multi-Roll Tape Dispensers

Style A

Line up multiple rolls of office tape, masking tape, and reinforced tape in one dispenser.

Style A—Styles A and B hold two 1" wide tape rolls or one 2" wide roll.

Dispensers													Replacement Blades		Replacement Spool Holders
		For Tape									Tape Not Included
Style	No. of Spool Holders	Max. Wd.	Max. Roll Dia.	For Spool ID	Lg.	Wd.	Ht.	Housing Material	Features	Color		Each		Each		Each
A	2	2"	5 1/2"	3"	10"	4 3/4"	4 3/4"	Plastic	Nonskid Base	Beige	75795A14	0000000	75795A65	000000	75795A66	000000

Wire, Rope, and Cord Length Measurers


Bench Mount	Floor Mount

Feed wire through the wheels inside the included counter to take measurements. The counter adds and subtracts. Wind your wire around adjustable pins on the feeder reel, or place spooled wire on the _1/2" diameter spindle. Gather it on the coiler reel once it has passed through the counter. Coiler reels have a hand crank and collapse for storage.

Polyurethane-Coated Steel Wheel—Polyurethane-coated wheels are for PTFE-coated wire and fiber-optic cable.

						Feeder Reel			Coiler Reel
	For Use With	Mounting Location	Max. Lg. Measured, ft.	Includes	Material OD	Max. Coil OD	Coil ID	Wt. Cap., lb.	Coil ID	Coil Cap.	Wt. Cap., lb.	Pedestal Ht.	Floor Stand Ht.		Each
Feet/Inches







				Steel Wheel

				Wire	Bench	9,999	Counter, Feeder Reel, Coiler Reel, Floor Stand, Two Pedestals	1/64" to 7/8"	25"	6 1/2" to 18 1/2"	120	12"	270 ft. @ 1/2"	75	14"	—	1686T411	000000000


				Wire	Floor	9,999	Counter, Feeder Reel, Coiler Reel, Floor Stand, Two Pedestals	1/64" to 7/8"	25"	6 1/2" to 18 1/2"	120	12"	270 ft. @ 1/2"	75	14"	24"	1686T111	00000000




						Polyurethane-Coated Steel Wheel

						Wire	Bench	9,999	Counter, Feeder Reel, Coiler Reel, Floor Stand, Two Pedestals	1/64" to 7/8"	25"	6 1/2" to 18 1/2"	120	12"	270 ft. @ 1/2"	75	14"	—	1686T921	00000000


						Wire	Floor	9,999	Counter, Feeder Reel, Coiler Reel, Floor Stand, Two Pedestals	1/64" to 7/8"	25"	6 1/2" to 18 1/2"	120	12"	270 ft. @ 1/2"	75	14"	24"	1686T941	00000000

Dispensers for Sanding Rolls


Wall Mount for 1 Sanding Roll	Bench and Wall Mount for 2 Sanding Rolls	Bench Mount for 2 Sanding Rolls

Wall Mount for 5 Sanding Rolls	Bench and Wall Mount for 2 Sanding Disc Rolls

Organize your sanding rolls so they're ready to grab and go. They’re designed so you can see when your roll is running low. Sanding rolls and discs are not included.

For Rolls—Dispensers for sanding rolls have a serrated edge, so you can tear off strips.

For Discs—Dispensers for sanding discs are shaped so you can pull out a sanding disc and tear it off the roll with one hand. They only work with sanding discs that come on a roll.

For 5 Rolls—Five-roll dispensers come with labels to mark different grits.

Steel—Made of steel, these dispensers won’t dent or scratch easily, even in tough industrial environments.

			For Max. Roll								Mounting Holes
	For No. of Rolls	Mounting Location	OD	Wd.	Ht.	Wd.	Dp.	Material	Color	Mounting Fasteners Included	No. of	Dia.	Includes		Each
For Rolls



		1	Wall	15"	2"	5"	4 1/4"	13 1/2"	Steel	Blue	Yes	4	1/8"	—	8157N13	000000


		2	Bench	5 1/4"	2 3/4"	5 1/2"	11"	4"	Steel	Red	No	—	—	—	8157N11	00000
		2	Bench, Wall	6"	2 3/4"	6 3/4"	7 1/8"	6 3/4"	Steel	Blue	No	2	3/8"	—	8157N15	000000
		5	Wall	10"	2"	3 1/4"	16 3/4"	14 1/4"	Steel	Blue	Yes	3	1/4"	Labels	8157N14	000000


		For Discs



				2	Bench, Wall	5 1/4"	6"	6 1/2"	13"	5 1/2"	Steel	Red	No	4	3/16"	—	8157N12	000000

Spool Racks


Complete Units, 4 Storage Levels	Complete Units, 7 Storage Levels	Add-On Units

The add-on unit attaches to a four-level complete unit to extend the width for additional storage. Complete unit with seven storage levels includes shelves for additional support. Fasteners are not included. All racks should be securely bolted to the floor.

		Overall						Spindle					Mounting Holes			Complete Units		Add-On Units
	No. of Storage Levels	Wd.	Ht.	Dp.	Wt. Cap. per Storage Level, lb.	Overall Wt. Cap., lb.	For Max. Spool OD	Dia.	Lg.	Color	Spindle Material	Spindle Color	No. of	Dia.	Mounting Fasteners Included		Each		Each
Painted Steel



		4	44"	96"	24"	2,000	8,000	48"	2"	36"	Gray	Painted Steel	Gray	4	7/8"	No	9335T31	0000000	9335T61	0000000


		4	44"	96"	36"	2,000	8,000	48"	2"	36"	Gray	Painted Steel	Gray	4	7/8"	No	9335T33	000000	9335T63	000000
		4	56"	96"	24"	2,000	8,000	48"	2"	48"	Gray	Painted Steel	Gray	4	7/8"	No	9335T32	000000	9335T62	000000
		4	56"	96"	36"	2,000	8,000	48"	2"	48"	Gray	Painted Steel	Gray	4	7/8"	No	9335T34	00000000	9335T64	000000
		7	36"	84"	8"	100	1,050	16"	11/16"	35 3/4"	Gray	Galvanized Steel	—	—	—	No	5079T23	000000	———	0

Toilet Paper Dispensers


Style A	Style B	(Style C) Two Roll

(Style C) Single Roll	Style D

Styles B and C—Styles B and C have a flow-control spindle that prevents the roll from spinning freely to conserve toilet paper and prevent vandalism.

Dispensers													Replacement Spindles		Toilet Paper
Style	For Relative Roll Size	For Max. No. of Rolls	For Max. Roll Dia.	Material	Ht.	Wd.	Dp.	Mounting Hardware Included	Mounting Hole Dia.	Features		Each		Each	Pkg. Qty.		Pkg.
A	Standard	1	5"	Chrome-Plated Zinc Alloy	1 1/2"	8"	3 1/4"	No	3/8"	—	2863K12	000000	2863K42	00000	20	2669K23	000000
A	Standard	1	5 1/2"	Stainless Steel	2"	7 3/4"	4"	No	3/8"	—	2863K41	00000	2863K42	0000	20	2669K23	00000
B	Standard	1	6"	Aluminum	1 3/4"	6 1/2"	4"	No	1/4"	Flow-Control Spindle	2761K84	00000	2761K88	00000	20	2669K23	00000
C	Standard	1	6"	Aluminum	1 1/2"	6 1/2"	5"	No	1/4"	Flow-Control Spindle, Keyed Lock	2880K52	00000	2880K57	00000	20	2669K23	00000
C	Standard	2	6"	Aluminum	1 1/2"	12 1/2"	5"	No	1/4"	Flow-Control Spindle, Keyed Lock	2880K51	00000	2880K57	00000	20	2669K23	00000
D	Standard	2	5 1/4"	Stainless Steel	11"	6 1/16"	5 15/16"	No	1/4"	Keyed Lock	2826K53	000000	2826K3	0000	20	2669K23	00000

Accessories and Replacements for Toilet Paper Dispensers

		Each
Key-Locking Spindle for Style A	3095K11	000000
Replacement Key for Styles D and G	3009K21	0000

		Mounting Holes
Mount Type	Mounting Fasteners Included	No. of	Dia.	Material		Each
Screw In	No	2	0.205"	Steel	7706A12	000000