Corner Rollers | McMaster-Carr

Quickly paint round surfaces as small as 1" and up to 10 feet in diameter. The two rollers adjust in 30° increments, so you can adjust the angle to suit your application. They accept 4 _1/2" and 6 _1/2" long roller covers (sold separately). Use the _3/4" Acme threaded hole to attach an extension handle (sold separately).

		Roller Cover				Material
For Max. Surface Dia., ft.	Angle Increments	Lg.	Core Dia.	Included	Handle Lg.	Handle	Frame		Each
10	30°	4 1/2", 6 1/2"	3/4"	No	8 5/8"	Plastic	Steel	2511N11	000000

Replacement Covers

			Material
4 1/2"	3/8"	1/4"	Fabric	Plastic	Semi-Smooth	2	2511N12	00000
6 1/2"	3/8"	1/4"	Fabric	Plastic	Semi-Smooth	2	2511N13	0000

Roller Conveyors

Mix and match conveyors and stands to design a conveyor system that moves parts exactly where they need to go. These conveyors have rollers that transfer items with flat or uneven bottoms, such as boxes or shipping tubes. They’re more durable and carry heavier loads than belt and skate wheel conveyors.

These conveyors don’t run on electricity, so their rollers require momentum from gravity, a push, or a powered conveyor to move. Since they’re not wired, they’re quick to set up and easy to maintain. This makes them handy if another conveyor unexpectedly shuts down or you need to extend an existing line in a pinch.

Note: Weight capacities are based on an evenly distributed load. The length of the material you’re conveying should be at least three times the roller spacing.

90° Curved Conveyor


Galvanized Steel Rollers	Aluminum Rollers

Image of Attribute. Front orientation. Contains Annotated.

Image of Specification. Front orientation. Contains Annotated. Roller Conveyors, 90° Curved Conveyor.

Curved conveyors have connecting hooks to attach conveyor sections together.

Galvanized Steel Rollers—Conveyors with galvanized steel rollers carry heavier loads than conveyors with aluminum rollers.

Aluminum Rollers—Conveyors with aluminum rollers are roughly half the weight of conveyors with steel rollers, so they’re easier to install.

	Wd.
	Overall	Between Frame	Radius	Frame Ht.	Wt. Cap. Per Lg. (No. of Stands Req.)	No. of Stands Included		Each
1 3/8" Dia. Galvanized Steel Rollers—1/4" Dia. Round Axle



		8"	6"	36"	2 1/2"	200 lb/ft (3)	0	5694N63	0000000


		12"	10"	36"	2 1/2"	200 lb/ft (3)	0	5825K75	000000
		15"	13"	36"	2 1/2"	200 lb/ft (3)	0	5825K76	000000
		18"	16"	36"	2 1/2"	200 lb/ft (3)	0	5825K77	000000
		24"	22"	36"	2 1/2"	200 lb/ft (3)	0	5825K78	000000
		26"	24"	36"	2 1/2"	200 lb/ft (3)	0	5694N66	000000


		1 3/8" Dia. Aluminum Rollers—1/4" Dia. Round Axle



				8"	6"	36"	2 1/2"	100 lb/ft (3)	0	5694N64	000000


				12"	10"	36"	2 1/2"	100 lb/ft (3)	0	58245K11	000000
				15"	13"	36"	2 1/2"	100 lb/ft (3)	0	58245K12	000000
				18"	16"	36"	2 1/2"	100 lb/ft (3)	0	58245K13	000000
				24"	22"	36"	2 1/2"	100 lb/ft (3)	0	58245K15	000000
				26"	24"	36"	2 1/2"	100 lb/ft (3)	0	5694N67	000000


				1.9" Dia. Galvanized Steel Rollers—1/4" Dia. Round Axle



						8"	6"	36"	2 1/2"	200 lb/ft (3)	0	5694N65	000000


						12"	10"	36"	2 1/2"	200 lb/ft (3)	0	5675K51	000000
						15"	13"	36"	2 1/2"	200 lb/ft (3)	0	5675K52	000000
						18"	16"	36"	2 1/2"	200 lb/ft (3)	0	5675K53	000000
						24"	22"	36"	2 1/2"	200 lb/ft (3)	0	5675K55	000000
						26"	24"	36"	2 1/2"	200 lb/ft (3)	0	5675K56	000000
						30"	28"	36"	2 1/2"	200 lb/ft (3)	0	5694N68	000000

45° Curved Conveyor


Galvanized Steel Rollers	Aluminum Rollers

Curved conveyors have connecting hooks to attach conveyor sections together.

Galvanized Steel Rollers—Conveyors with galvanized steel rollers carry heavier loads than conveyors with aluminum rollers.

Aluminum Rollers—Conveyors with aluminum rollers are roughly half the weight of conveyors with steel rollers, so they’re easier to install.

	Wd.
	Overall	Between Frame	Radius	Frame Ht.	Wt. Cap. Per Lg. (No. of Stands Req.)	No. of Stands Included		Each
1 3/8" Dia. Galvanized Steel Rollers—1/4" Dia. Round Axle



		12"	10"	36"	2 1/2"	200 lb/ft (3)	0	5825K116	0000000


		15"	13"	36"	2 1/2"	200 lb/ft (3)	0	5825K117	000000
		18"	16"	36"	2 1/2"	200 lb/ft (3)	0	5825K118	000000
		24"	22"	36"	2 1/2"	200 lb/ft (3)	0	5825K119	000000


		1 3/8" Dia. Aluminum Rollers—1/4" Dia. Round Axle



				12"	10"	36"	2 1/2"	100 lb/ft (3)	0	58245K107	000000


				15"	13"	36"	2 1/2"	100 lb/ft (3)	0	58245K108	000000
				18"	16"	36"	2 1/2"	100 lb/ft (3)	0	58245K109	000000
				24"	22"	36"	2 1/2"	100 lb/ft (3)	0	58245K111	000000


				1.9" Dia. Galvanized Steel Rollers—1/4" Dia. Round Axle



						12"	10"	36"	2 1/2"	200 lb/ft (3)	0	5675K64	000000


						15"	13"	36"	2 1/2"	200 lb/ft (3)	0	5675K65	000000
						18"	16"	36"	2 1/2"	200 lb/ft (3)	0	5675K66	000000
						24"	22"	36"	2 1/2"	200 lb/ft (3)	0	5675K67	000000
						26"	24"	36"	2 1/2"	200 lb/ft (3)	0	5675K68	000000

High-Capacity Large-Diameter Roller Conveyors

For more demanding shipping and assembly applications, these conveyors can carry heavy loads.

Note: Weight capacities are based on an evenly distributed load with at least one stand at each end for straight conveyors, and an additional stand in the center for curved conveyors. The length of the material you’re conveying should be at least three times the roller spacing.

90° Curved Conveyor

	Wd.
	Overall	Between Frame	Radius	Roller Projection	Frame Ht.	Wt. Cap. Per Lg. (No. of Stands Req.)	No. of Stands Included	Features		Each
2 1/2" Dia. Steel Rollers—11/16" Hex Axle



		12"	9"	32 1/2"	1/4"	4"	800 lb/ft (3)	0	Connecting Plates	5747K91	0000000


		16"	13"	32 1/2"	1/4"	4"	800 lb/ft (3)	0	Connecting Plates	5747K92	000000
		18"	15"	32 1/2"	1/4"	4"	800 lb/ft (3)	0	Connecting Plates	5747K93	000000
		20"	17"	32 1/2"	1/4"	4"	800 lb/ft (3)	0	Connecting Plates	5747K94	000000
		24"	21"	32 1/2"	1/4"	4"	800 lb/ft (3)	0	Connecting Plates	5747K95	000000
		30"	27"	32 1/2"	1/4"	4"	800 lb/ft (3)	0	Connecting Plates	5747K96	000000
		34"	31"	48"	1/4"	4"	800 lb/ft (3)	0	Connecting Plates	5747K97	00000000
		52"	49"	49 1/2"	1/4"	4"	800 lb/ft (3)	0	Connecting Plates	5747K98	00000000

High-Capacity Roller Conveyors

For moving heavy products on shipping and assembly lines, these have three times the load capacity of our standard roller conveyors. Whether you’re creating a straight line, a curve to route items around equipment, or a decline to lower them into a truck trailer, mixing and matching conveyors and stands lets you customize your system as needed. These conveyors have rollers that transfer items with flat or uneven bottoms, such as boxes or shipping tubes.

Because these conveyors don’t run on electricity, their rollers require momentum from gravity, a push, or a powered conveyor to move. Since they’re not wired, they’re quick to set up and easy to maintain. This makes them handy if another conveyor unexpectedly shuts down or you need to extend an existing line in a pinch. However, these high-capacity conveyors weigh about twice as much as standard ones, so they require more effort to move around.

Choose a small roller spacing when conveying small items to prevent them from getting stuck between rollers. For large items, a large roller spacing helps minimize friction between your material and the rollers.

Note: Weight capacities are based on an evenly distributed load. The length of the material you’re conveying should be at least three times the roller spacing.

90° Curved Conveyor

	Wd.
	Overall	Between Frame	Radius	Roller Projection	Frame Ht.	Wt. Cap. Per Lg. (No. of Stands Req.)	No. of Stands Included	Features		Each
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle



		16"	13"	32 1/2"	1/4"	3 1/2"	620 lb/ft (3)	0	Connecting Plates	5746K167	0000000


		18"	15"	32 1/2"	1/4"	3 1/2"	620 lb/ft (3)	0	Connecting Plates	5746K168	000000
		20"	17"	32 1/2"	1/4"	3 1/2"	620 lb/ft (3)	0	Connecting Plates	5746K105	000000
		24"	21"	32 1/2"	1/4"	3 1/2"	620 lb/ft (3)	0	Connecting Plates	5746K106	000000
		30"	27"	32 1/2"	1/4"	3 1/2"	620 lb/ft (3)	0	Connecting Plates	5746K107	000000
		36"	33"	48"	1/4"	3 1/2"	620 lb/ft (3)	0	Connecting Plates	5746K108	00000000

Paint Rollers for Tight Spaces

4" Roller Cover Length

These short, narrow rollers cover areas where standard paint rollers won't fit.

4" Roller Cover Length—4"-long rollers are small enough to fit inside a one-gallon paint can.

Foam Roller Cover Nap—Roller covers with a foam nap don’t shed for a very smooth finish.

Woven-Fabric Roller Cover Nap—Roller covers with a woven fabric nap resist shedding fibers and leave a smoother finish than a knitted fabric nap.

For Semi-Rough Surfaces—Rollers for semi-rough surfaces are for use on textured walls and concrete.

For Semi-Smooth Surfaces—Rollers for semi-smooth surfaces are for use on walls and ceilings.

For Smooth Surfaces—Rollers for smooth surfaces are for use on metal doors and cabinetry.

Roller Cover					Material						Each		Package
Lg.	Nap Thk.	Core Dia.	Included	Handle Lg.	Handle	Frame	Nap	Roller Cover Core	For Surface Texture	For Use With		Each	Pkg. Qty.		Pkg.
4"	3/8"	1/4"	Yes	18"	Plastic	Steel	Woven Fabric	Plastic	Semi-Smooth	Solvent-Based Paint and Coatings, Water-Based Paint and Coatings	94915T45	000000	6	94915T456	000000
4"	9/16"	1/4"	Yes	12"	Plastic	Steel	Foam	Plastic	Smooth	Solvent-Based Paint and Coatings, Water-Based Paint and Coatings	94915T32	00000	12	94915T33	000000
6"	3/8"	1/4"	Yes	12"	Plastic	Steel	Woven Fabric	Plastic	Semi-Smooth	Solvent-Based Paint and Coatings, Water-Based Paint and Coatings	94915T22	00000	12	94915T23	000000
6"	1/2"	1/4"	Yes	12"	Plastic	Plastic	Foam	Plastic	Semi-Rough, Semi-Smooth	Solvent-Based Paint and Coatings, Water-Based Paint and Coatings	94915T35	00000	12	94915T36	000000
6 1/2"	1/2"	3/4"	Yes	25"	Plastic	Steel	Woven Fabric	Plastic	Semi-Rough, Semi-Smooth	Solvent-Based Paint and Coatings, Water-Based Paint and Coatings	7751T613	00000	12	7751T614	000000

Accessories and Replacements for Paint Rollers

Replacement Paint Roller Covers for Tight Spaces

			Material
Lg.	Nap Thk.	Core Dia.	Nap	Core	For Surface Texture	Pkg. Qty.		Pkg.
4"	3/8"	1/4"	Fabric	Plastic	Semi-Smooth	2	94915T46	00000
6"	3/8"	1/4"	Fabric	Plastic	Semi-Smooth	2	94915T37	0000
6 1/2"	1/2"	3/4"	Woven Fabric	Plastic	Semi-Rough, Semi-Smooth	2	7751T612	0000

Replacement Shed-Proof Paint Roller Covers for Tight Spaces

			Material
Lg.	Nap Thk.	Core Dia.	Nap	Core	For Surface Texture	Pkg. Qty.		Pkg.
4"	9/16"	1/4"	Foam	Plastic	Smooth	2	2409N1	00000
6"	9/16"	1/4"	Foam	Plastic	Smooth	2	2409N2	0000

Stainless Steel Roller Conveyors

Conveyors are made of corrosion-resistant stainless steel, making them suitable for washdown applications.

90° Curved Conveyor

	Conveyors									Replacement Bearings
	Wd.
	Overall	Between Frame	Radius	Roller Projection	Frame Ht.	Wt. Cap. Per Lg. (No. of Stands Req.)	No. of Stands Included		Each		Each
1 5/8" Dia. Stainless Steel Rollers—7/16" Hex Axle



		12"	10"	36"	5/16"	2 1/2"	235 lb/ft (3)	0	5811K53	000000000	2279T72	000000


		18"	16"	36"	5/16"	2 1/2"	235 lb/ft (3)	0	5811K41	00000000	2279T72	00000
		24"	22"	36"	5/16"	2 1/2"	235 lb/ft (3)	0	5811K42	00000000	2279T72	00000
		26"	24"	36"	5/16"	2 1/2"	235 lb/ft (3)	0	5811K43	00000000	2279T72	00000
		30"	28"	36"	5/16"	2 1/2"	235 lb/ft (3)	0	5811K44	00000000	2279T72	00000

Bench-Top Roller Conveyors

Designed to rest on a work surface, these conveyors have two sets of axle holes so you can position the conveying surface _1/8" above the frame or _3/4" below the frame (position below to use the frame as a guide rail).

Note: Weight capacities are based on an evenly distributed load. The length of the material you're conveying should be at least three times the roller spacing.

90° Curved Conveyor

Galvanized Steel Rollers—Conveyors with galvanized steel rollers are stronger than aluminum and have some corrosion resistance.

	Wd.
	Overall	Between Frame	Radius	Roller Projection	Frame Ht.	Wt. Cap. Per Lg. (No. of Stands Req.)		Each
3/4" Dia. Galvanized Steel Rollers—1/4" Dia. Round Axle



		5 3/4"	4 7/8"	36"	1/8"	2 1/2"	35 lb/ft (0)	5677K56	0000000


		11 1/4"	10 3/8"	36"	1/8"	2 1/2"	35 lb/ft (0)	5677K57	000000
		14 3/4"	13 7/8"	36"	1/8"	2 1/2"	35 lb/ft (0)	5677K58	000000
		18 3/4"	17 7/8"	36"	1/8"	2 1/2"	35 lb/ft (0)	5677K59	000000

Motorized Roller Conveyors

Also known as line-shaft conveyors, these conveyors are driven by a drive shaft and round belts. Unlike belt conveyors, these have built-in accumulation, so packages can build up without crashing into one another or falling off the conveyor. The rollers are designed to smoothly transfer totes, packages, and other lightweight material. Shipping tubes, drums, and pails are less likely to get stuck in between rollers than between skate wheels.

Mix and match stands and conveyors to form straight lines, curve around obstacles, or create inclines. Only straight conveyor sections contain a motor, but they can power up to 60 ft. of conveyor extensions on either side. The motor can be reversed to send material in either direction.

Note: Weight capacities are based on an evenly distributed load. The length of the material you’re conveying should be at least three times the roller spacing.

90° Curved Conveyor

Replacement Stands

90° curved conveyors have tapered rollers that keep packages centered.

	Wd.				Ht.
	Overall	Between Frame	Radius	Roller Projection	Frame	Overall	Wt. Cap. Per Lg. (No. of Stands Req.)	No. of Stands Included	Features		Each
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle



		16"	13"	36"	1/4"	5 1/2"	36" to 48"	40 lb/ft (3)	1	Connecting Plates	5898K18	000000000


		17"	14"	36"	1/4"	5 1/2"	36" to 48"	40 lb/ft (3)	1	Connecting Plates	5898K501	00000000
		19"	16"	36"	1/4"	5 1/2"	36" to 48"	40 lb/ft (3)	1	Connecting Plates	5898K28	00000000
		21"	18"	36"	1/4"	5 1/2"	36" to 48"	40 lb/ft (3)	1	Connecting Plates	5898K502	00000000
		25"	22"	36"	1/4"	5 1/2"	36" to 48"	40 lb/ft (3)	1	Connecting Plates	5898K38	00000000
		29"	26"	36"	1/4"	5 1/2"	36" to 48"	40 lb/ft (3)	1	Connecting Plates	5898K503	00000000
		31"	28"	36"	1/4"	5 1/2"	36" to 48"	40 lb/ft (3)	1	Connecting Plates	5898K504	00000000
		35"	32"	36"	1/4"	5 1/2"	36" to 48"	40 lb/ft (3)	1	Connecting Plates	5898K85	00000000
		41"	38"	36"	1/4"	5 1/2"	36" to 48"	40 lb/ft (3)	1	Connecting Plates	5898K505	00000000

Replacements for Conveyors

Replacement Stands

				Conveyor Mounting Slot
	Ht.	Conveyor Mounting Fasteners Included	No. of Conveyor Mounting Holes	Lg.	Wd.	Mounting Hole Ctr.-to-Ctr.	Floor Mounting Fasteners Included	No. of Floor Mounting Holes	Floor Mounting Hole Dia.		Each
For 16" Overall Width



		30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K781	0000000


		For 17" Overall Width



				30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K788	000000


				For 19" Overall Width



						30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K782	000000


						For 21" Overall Width



								30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K789	000000


								For 25" Overall Width



										30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K784	000000


										For 29" Overall Width



												30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K791	000000


												For 31" Overall Width



														30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K792	000000


														For 35" Overall Width



																30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K787	000000


																For 41" Overall Width



																		30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K793	000000

	For Conveyor Type
Drive Belts


Curved Section	5898K911	00000

Component		Each
Drive Spool	5898K71	00000

Component		Each
Drive Spool Retaining Clip	5898K72	00000

Touch-Up Paint Rollers for Tight Spaces

For quick jobs without the cleanup, these rollers come with a small plastic tray. Handy for painting a tight spot, they cover spaces where standard-size rollers won't fit.

Roller Cover					Material						Each		Package
Lg.	Nap Thk.	Core Dia.	Included	Handle Lg.	Handle	Frame	Nap	Roller Cover Core	For Surface Texture	For Use With		Each	Pkg. Qty.		Pkg.
3"	1/4"	1"	Yes	5 1/2"	Plastic	Plastic	Knitted Fabric	Plastic	Semi-Smooth, Smooth	Solvent-Based Paint and Coatings, Water-Based Paint and Coatings	77845T84	00000	6	77845T846	000000

Replacement Covers

	Pkg. Qty.		Pkg.
Replacement Covers	2	77845T85	00000

Modular Mini Chain Belt Conveyors

Build a mini conveyor in any shape you need. These conveyors have curved, straight, incline, and decline runs that you can quickly join together with the included brackets. They're often used in areas with limited floor space and applications that require frequent layout changes. To customize your conveyor, add on components, such as package stops and merge guides, with the built-in T-slots on the side. These conveyors come with guides installed.

You'll need a drive assembly, an idler assembly, and a belt to complete your conveyor. To determine the belt length you need, multiply your conveyor’s length by 2.1. If you need a belt longer than what’s available, you can connect multiple together. Use a belt installation tool to pull out the pin, then line up two ends and push the pin in with the tool to connect them. You can also shorten a belt using the same tool.

Maximum run length is 70 ft. with two 90° curves. Adding more curved conveyors will reduce the run length.

90° Curved Conveyors

90° curved conveyors add a turn to your conveyor.

Wd.						Ht.
For Belt	Frame	T-Slot, mm	Overall	Radius	Conveyor Bed Lg., ft.	Frame	Overall	Wt. Cap. per Lg., lb/ft	No. of Stands Included	Frame Material	Features		Each



	3 1/4"	3 1/4"	11	27 3/4"	7"	3	3"	38"	40	1	Aluminum	Pre-Installed Guides	4766N41	000000000


	6"	6"	11	31 3/4"	9"	3	3"	38"	40	1	Aluminum	Pre-Installed Guides	4766N42	00000000
	10 1/4"	10 1/4"	11	44 1/2"	28"	4	3"	38"	44	1	Aluminum	Pre-Installed Guides	4766N43	00000000

High-Capacity Stainless Steel Roller Conveyors

For more demanding shipping and assembly applications, these conveyors can carry heavy loads. They are made of corrosion-resistant stainless steel, making them suitable for washdown applications.

90° Curved Conveyor

	Conveyors									Replacement Rollers				Replacement Bearings
	Wd.									Roller
	Overall	Between Frame	Radius	Roller Projection	Frame Ht.	Wt. Cap. Per Lg. (No. of Stands Req.)	No. of Stands Included		Each	Wd.	Ga.		Each		Each
1 3/4" Dia. Stainless Steel Rollers—7/16" Hex Axle



		18"	16"	36"	5/16"	3 1/2"	500 lb/ft (3)	0	1315N21	000000000	15 1/2"	11	1315N71	0000000	1315N72	000000


		24"	22"	36"	5/16"	3 1/2"	500 lb/ft (3)	0	1315N23	00000000	21 1/2"	11	1315N73	000000	1315N72	00000

Paint Rollers for Small Round Surfaces

These paint rollers conform to round surfaces up to 2 _1/2" diameter. They provide well-rounded coverage when painting columns, cylinders, pipes, and other curved surfaces. Use the _3/4" Acme threaded hole to attach an extension handle (sold separately).

	Roller Cover				Material
For Max. Surface Dia.	Lg.	Nap Thk.	Included	Handle Lg.	Handle	Frame	Nap	Roller Cover Core	For Surface Texture	For Use With		Each
2 1/2"	2 1/2"	3/8"	Yes	11 3/4"	Plastic	Steel	Foam	Plastic	Semi-Smooth, Smooth	Solvent-Based Paint and Coatings, Water-Based Paint and Coatings	10355T35	00000

Fillable Touch-Up Paint Rollers for Tight Spaces

Fill the bottle-like handle on these rollers with paint and dispense as you roll, so you don't have to stop at a paint tray. Rollers are short for quick touch-up jobs or to fit in tight spaces. Rollers have a plastic nap. Use them with water-based paint on smooth, semi-smooth, semi-rough, or rough surfaces, such as metal doors, cabinetry, walls, ceilings, textured walls, concrete, stone, masonry, and brick.

		Roller Cover					Material
Cap., fl. oz.	Approx. Coverage, ft²	Lg.	Nap Thk.	Core Dia.	Included	Handle Lg.	Handle	Frame	Nap	Roller Cover Core	For Surface Texture	For Use With	Features		Each
6	24	3"	3/8"	1"	Yes	12"	Plastic	Plastic	Plastic	Plastic	Rough, Semi-Rough, Semi-Smooth, Smooth	Water-Based Paint and Coatings	Built-In Paint Reservoir	2358N3	000000

Replacement Covers

		Each
Replacement Covers	2358N4	00000

Fillable Paint Rollers

Cover large areas quickly without the need for a paint tray. These rollers have a tube that draws 22 fl. oz. of paint into the handle—enough to cover about 70 square feet. Squeeze the trigger to keep the roller filled with fresh paint as you go. Rollers have a knitted fabric nap that leaves a textured finish. Use them with latex and other water-based paint on semi-smooth surfaces, such as walls and ceilings.

		Roller Cover					Material
Cap., fl. oz.	Approx. Coverage, ft²	Lg.	Nap Thk.	Core Dia.	Included	Handle Lg.	Handle	Frame	Nap	Roller Cover Core	For Surface Texture	For Use With	Features		Each
22	70	9"	3/8"	1 1/2"	Yes	34"	Plastic	Plastic	Knitted Fabric	Plastic	Semi-Smooth	Solvent-Based Paint and Coatings, Water-Based Paint and Coatings	Built-In Paint Reservoir	2353N1	000000

Replacement Paint Roller Covers for Fillable Paint Rollers

			Material
9"	3/8"	1 1/2"	Knitted Fabric	Plastic	Semi-Smooth	2353N2	00000
9"	3/4"	1 1/2"	Knitted Fabric	Plastic	Semi-Rough	2353N3	0000

Paint Rollers for Large Round Surfaces

Coat large curved surfaces of various sizes with these rollers. They provide well-rounded coverage when painting columns, cylinders, pipes, and other curved surfaces. Use the _3/4" Acme threaded hole to attach an extension handle (sold separately).

Roller Cover				Material
Lg.	Nap Thk.	Included	Handle Lg.	Handle	Frame	Nap	Roller Cover Core	For Surface Texture	For Use With		Each
7"	3/4"	Yes	12"	Wood	Aluminum	Knitted Fabric	Plastic	Rough, Semi-Rough	Solvent-Based Paint and Coatings, Water-Based Paint and Coatings	7814T12	000000

Replacement Covers

Skate Wheel Conveyors

Skate wheel conveyors are for light duty loading and unloading of flat-bottom objects.

Note: Weight capacities are based on an evenly distributed load with at least one stand at each end for straight conveyors, and an additional stand in the center for curved conveyors. You can increase the weight capacity of a straight conveyor by adding a stand in the center. The length of the material you’re conveying should be at least three times the axle spacing.

90° Curved Conveyors

Zinc-Plated Steel Wheel—Zinc-plated steel is stronger than aluminum and provides some corrosion resistance.

Aluminum Wheel—Aluminum is lighter than steel with better corrosion resistance.

Nylon Wheel—Nylon is nonmarring.

			Wheel
	Overall Wd.	Radius	Dia.	Spacing	Projection	Color	Axle Dia.	No. of Wheels per Axle	Frame Ht.	Wt. Cap. Per Lg. (No. of Stands Req.)	No. of Stands Included		Each
Zinc-Plated Steel Wheel with Galvanized Steel Frame



		12"	36"	1.9"	3"	3/8"	—	1/4"	2, 3	2 1/2"	450 lb/ft (3)	0	56755K911	0000000


		15"	33"	1.9"	3"	3/8"	—	1/4"	2, 3	2 1/2"	450 lb/ft (3)	0	56755K921	000000
		18"	30"	1.9"	3"	3/8"	—	1/4"	3, 4	2 1/2"	450 lb/ft (3)	0	56755K931	000000
		24"	36"	1.9"	3"	3/8"	—	1/4"	6	2 1/2"	300 lb/ft (3)	0	56755K941	000000


		Aluminum Wheel with Aluminum Frame



				12"	36"	1.9"	3"	3/8"	—	1/4"	2, 3	2 1/2"	200 lb/ft (3)	0	56755K81	000000


				15"	33"	1.9"	3"	3/8"	—	1/4"	2, 3	2 1/2"	200 lb/ft (3)	0	56755K82	000000
				18"	30"	1.9"	3"	3/8"	—	1/4"	3, 4	2 1/2"	200 lb/ft (3)	0	56755K83	000000
				24"	36"	1.9"	3"	3/8"	—	1/4"	6	2 1/2"	120 lb/ft (3)	0	56755K84	000000


				Nylon Wheel with Galvanized Steel Frame



						12"	36"	1.9"	3"	3/8"	Black	1/4"	2, 3	2 1/2"	450 lb/ft (3)	0	56755K912	000000


						15"	33"	1.9"	3"	3/8"	Black	1/4"	2, 3	2 1/2"	450 lb/ft (3)	0	56755K922	000000
						18"	30"	1.9"	3"	3/8"	Black	1/4"	3, 4	2 1/2"	450 lb/ft (3)	0	56755K932	000000
						24"	36"	1.9"	3"	3/8"	Black	1/4"	6	2 1/2"	300 lb/ft (3)	0	56755K942	000000

Paint Roller Covers for Tight Spaces

These short, narrow roller covers fit behind and between objects.

Nap thickness determines the coating finish texture. The thicker the nap, the more texture it adds. For a smoother finish, choose a cover with a short nap thickness.

For Semi-Smooth Surfaces—Covers for semi-smooth surfaces are for use on walls and ceilings.

For Semi-Rough Surfaces—Covers for semi-rough surfaces are for use on textured walls and concrete.

			Material
Lg.	Nap Thk.	Core Dia.	Nap	Core	For Surface Texture	For Use With	Pkg. Qty.		Pkg.
6 1/2"	1/2"	3/4"	Woven Fabric	Plastic	Semi-Smooth, Semi-Rough	Solvent-Based Paint and Coatings, Water-Based Paint and Coatings	2	7751T612	00000

Spatter-Free Paint Rollers

The shield on these rollers prevents spatter from creating a mess. Use the 3/4" Acme threaded hole to attach an extension handle (sold separately).

Roller Cover					Material							Each
Lg.	Nap Thk.	Core Dia.	Included	Handle Lg.	Handle	Frame	Nap	Roller Cover Core	For Surface Texture	For Use With		1-14	15-Up
9"	3/8"	1 1/2"	Yes	5"	Plastic	Plastic	Knitted Fabric	Plastic	Semi-Smooth	Solvent-Based Paint and Coatings, Water-Based Paint and Coatings	9542T41	00000	00000

Replacements for Paint Rollers

Replacement Covers

		Material			Each		Package
Nap Thk.	Core Dia.	Nap	Core	For Surface Texture		Each	Pkg. Qty.		Pkg.
3/8"	1 1/2"	Knitted Fabric	Plastic	Semi-Smooth	9542T65	00000	12	9542T87	000000
1/2"	1 1/2"	Knitted Fabric	Plastic	Semi-Rough, Semi-Smooth	9542T66	0000	12	9542T92	00000
1"	1 1/2"	Knitted Fabric	Plastic	Rough	9542T55	0000	12	9542T83	00000
1 1/4"	1 1/2"	Knitted Fabric	Plastic	Rough, Semi-Rough, Semi-Smooth, Smooth	9542T56	00000	10	9542T85	00000

Replacement Smooth-Finish Paint Roller Covers

		Material			Each		Package
Nap Thk.	Core Dia.	Nap	Core	For Surface Texture		Each	Pkg. Qty.		Pkg.
3/16"	1 1/2"	Fabric	Plastic	Smooth	7755T3	00000	12	7755T306	000000
1/4"	1 1/2"	Fabric	Plastic	Semi-Smooth, Smooth	9542T51	0000	15	9542T516	00000
3/8"	1 1/2"	Fabric	Plastic	Semi-Smooth	7755T4	0000	12	7755T406	00000
1/2"	1 1/2"	Fabric	Plastic	Semi-Rough, Semi-Smooth	7755T5	0000	12	7755T516	00000
3/4"	1 1/2"	Fabric	Plastic	Semi-Rough	7755T43	0000	—	———	0

Replacement Shed-Proof Paint Roller Covers

		Material			Each		Package
Nap Thk.	Core Dia.	Nap	Core	For Surface Texture		Each	Pkg. Qty.		Pkg.
3/16"	1 1/2"	Foam	Plastic	Smooth	95535T93	00000	6	95535T936	000000
9/16"	1 1/2"	Foam	Plastic	Smooth	95535T94	0000	—	———	0

Replacement Paint Roller Covers for Adhesives and Epoxies

		Material			Each		Package
Nap Thk.	Core Dia.	Nap	Core	For Surface Texture		Each	Pkg. Qty.		Pkg.
1/4"	1 1/2"	Flocked Fabric	Plastic	Semi-Smooth, Smooth	9151T31	00000	12	9151T316	000000