Use these end mills for general purpose work in most material, such as aluminum, brass, bronze, iron, and steel. They have scooped corners for rounding the sharp edges of your workpiece.

With better heat and wear resistance than high-speed steel, these cobalt steel end mills run at higher speeds and provide better performance on hard material. They have scooped corners for rounding the sharp edges of your workpiece.

For technical drawings and 3-D models, click on a part number.

With a wear-resistant coating and high helix angle, these end mills provide excellent shearing and chip removal in stainless steel and titanium. Made of solid carbide, they’re harder, stronger, and more wear resistant than high-speed steel and cobalt steel for the longest life and best finish. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking. Often used for slotting and pocketing cuts in mold and die making, they have a 90° profile and rounded corners, which reduce flute breakage and chipping. All are center cutting, allowing plunge cuts into a surface.

For technical drawings and 3-D models, click on a part number.

Also known as torus end mills, these tools have a rounded edge and long, thin neck for precision contouring in molds and dies. Coated with titanium aluminum nitride (TiAlN), they have the hardness, wear resistance, and temperature resistance needed for cutting tool steel, hardened steel, and iron. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking. All are center cutting, allowing plunge cuts into a surface.

For technical drawings and 3-D models, click on a part number.

Choose from bits that cut rounded, cove, wavy, or Roman ogee corners along the edges of your workpiece.

Carbide-tipped high-speed steel bits are for use on wood. A ball-bearing pilot helps position the bit for straight cuts.

Use solid carbide bits to round off sharp edges on plastic sheets. Their extreme hardness makes them brittle, so they're not recommended for use with hand tools. A highly rigid setup, such as a CNC machine, is necessary to prevent the bit from breaking.