The lightweight wheels on these casters provide impact resistance on smooth surfaces. They are the most economical wheel option. Their 304 stainless steel frame is corrosion resistant.

With a 304 stainless steel frame for good corrosion resistance, these casters are an economical alternative to washdown casters. Wheels range from soft rubber that absorbs shock and sound while providing good traction on rough surfaces, to hard, impact-resistant rubber that rolls easily on smooth surfaces.

The wheels of these casters have a 90° V-groove and a flat tread to move your equipment on angle-iron track as well as the floor. Polyurethane wheels combine the abrasion resistance of plastic with the shock- and sound-absorbing qualities of rubber. Their 304 stainless steel frame is corrosion resistant.

Stable and easy to turn, these casters have the lowest mount heights in their capacity range.

A stainless steel frame and rust resistant bearings gives these casters good corrosion resistance. Their polyurethane wheels combine the abrasion resistance of plastic with the shock- and sound-absorbing qualities of rubber. Use them on smooth or rough floors and in areas with debris.

The wheels of these casters have a 90° V-groove and a flat tread to move your equipment on angle-iron track as well as the floor. The 303 stainless steel wheels are suitable for steam-cleaning applications.

The wheels on these casters are made of a special rubber that is impact and chemical resistant and absorbs shock for smooth rolling over rough surfaces. They have a stainless steel frame and sealed bearings for corrosion resistance.

Polyurethane wheels combine the abrasion resistance of plastic with the shock- and sound-absorbing qualities of rubber. Use them on smooth or rough floors and in areas with debris. Their 304 stainless steel frame is corrosion resistant.

A nylon frame gives these casters the corrosion resistance you need for equipment that’s frequently washed down. Their soft rubber wheels are shock absorbing and provide good traction on rough surfaces.

Easily replace casters on InterMetro carts and shelving—friction holds them in place in the 1" OD posts.

Also known as universal casters, press-fit these casters into standard 1" OD wire shelving posts.

The dual-wheel design provides better load distribution and easier turning than leveling plate casters. Adjust the leveling pad to keep your equipment stationary and compensate for uneven floors.

These wheels have a 90° V-groove and a flat tread to move your equipment on angle-iron track as well as the floor.

The flange has mounting holes for fastening.

Install in a threaded hole or use a nut to secure.

Ball transfers have a double-sealed ball to keep out dirt and debris. Side vents expel contaminants.