You can set these counters up to count with or without voltage inputs based on the switch, sensor, or encoder you have. An output relay sends a signal to another device when the counter reaches a set point. The signal can start/stop a process or trigger an alarm. If power is lost, count backup maintains the count and programming backup maintains settings.

Count metallic objects as they touch or pass within 0.059" of this counter's built-in sensor. It has an output relay to send a signal to another device when a set point is reached. The signal can start/stop a process or trigger an alarm. A scaling function lets you adjust the unit of measure to suit your application. Counter and enclosure are protected from dust and washdowns and can be used outdoors (rated NEMA 4X). Drill through the back of the enclosure to mount to a wall or work surface.

Display running time on a machine so you can schedule preventative maintenance. These counters have two displays. One display shows the total running time and cannot be reset; the other shows the time elapsed since the last maintenance and can be wired for remote reset.

The digits displayed on these counters are visible up to 100 ft. away and the display can be adjusted to suit lighting conditions. You can set counters up to count with or without voltage inputs based on the switch, sensor, or encoder you have. They can be wired for remote reset. An output relay sends a signal to another device when a set point is reached. The signal can start/stop a process or trigger an alarm. Counters are protected from dust and washdowns and can be used outdoors (rated NEMA 4X). Programming backup maintains settings if power is lost.

At a glance, quickly read counts and rates in units, such as gallons per minute. The display on these counters/ratemeters is visible up to 130 ft. away—almost half of a football field—and gets brighter or dimmer based on your lighting. They have an output relay, so you can program them to start or stop a process or trigger an alarm when they reach their setpoint. These counters/ratemeters count using either a voltage or switch contact input, so they work with most sensors, encoders, and switches. You can wire them to reset remotely.

Press the button on the display to toggle between the count and rate. You can also program these counters/ratemeters to toggle automatically between the count and rate every few seconds. With the scaling function, you can change the unit of measure. Hardwire them to power the display. They have a programming backup, so if you lose power you won't lose your settings.

IP65 and NEMA 4X rated, these counters/ratemeters stand up to dust, rain, snow, and washdowns.