Filter by
Encoder Output Channel Type
Shaft Diameter
Number of Pins
Encoder Output Signal
For Maximum Shaft Speed
Transmitter Type
Body Material
For Counter Function
Mount Type
Frequency
Output Current
DFARS Specialty Metals
Export Control Classification Number (ECCN)
REACH
Shaft Material
Overall Length
Shaft Length
Electrical Connection
Mounting Hole Center-to-Center
Mounting Plate Length
Mounting Plate Width
Rotary Motion Position-Measuring Transmitters
Shown with Wheel and Mounting Bracket (Both Sold Separately)
Provide motion feedback to counters, controllers, and motor drives for automated motion control and measurement applications. Also known as encoders, transmitters convert rotary motion to an electrical signal so you can operate your system based on distance, direction, and speed of travel. Transmitters have Pull-Up Resistor output.
Use a flexible shaft coupling (not included) to connect the transmitter shaft to a drive shaft.
Mount a wheel (not included) to use transmitters to measure lengths.
Use cables (not included) to connect transmitters to counters and controllers.
Transmitters with a quadrature output channel must be used with a controller that has quadrature detection to get a 4X resolution increase.
Mount. Plate | Mount. Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Counter Function | Output Channels | Resolution Increase | For Max. Shaft Speed, rpm | Input Voltage  | Output Current, mA | Shaft Coupling Required | Body Material | Shaft Material | Lg. | Wd. | Ctr.-to-Ctr. | Thread Size | Choose a Resolution | Each | |
Single Output Channel | |||||||||||||||
| Up | A | 2X | 6,000 | 5V DC-28V DC | 250 | Yes | Aluminum | Stainless Steel | 2 1/4" | 2 1/4" | 1.41" | 6-32 | 00000000 | 0000000 | |
Quadrature Output Channel | |||||||||||||||
| Up and Down | A, B | 2X, 4X | 6,000 | 5V DC-28V DC | 250 | Yes | Aluminum | Stainless Steel | 2 1/4" | 2 1/4" | 1.41" | 6-32 | 00000000 | 000000 | |