For quick installation, this counter fits standard DIN panel cutouts. Wire it up to an electrical pulse-emitting switch, sensor, or encoder for use on machine tools, packaging machinery, or other equipment. An output relay sends a signal to another device when the counter reaches a set point. The signal can start/stop a process or trigger an alarm. A gasket provides protection from direct water sprays (meets IP65). UL Recognized Component, C-UL Recognized Component, and CE marked, this counter meets American, Canadian, and European safety standards.

Wire these counters up to an electrical pulse-emitting switch, sensor, or encoder for use on machine tools, packaging machinery, or other equipment. They display the set point and count incoming pulses. When the counter reaches the set point, an output relay sends a signal to another device. The signal can start/stop a process or trigger an alarm.

Counters with a backlit display have good visibility in low-light conditions. They’re UL and C-UL recognized components and are CE marked, so they meet American, Canadian, and European safety standards.

For technical drawings and 3-D models, click on a part number.

This counter does not require voltage to register a count. It is protected from dust and washdowns and can be used outdoors (rated NEMA 4).

For technical drawings and 3-D models, click on a part number.

You can set these counters up to count with or without voltage inputs based on the switch, sensor, or encoder you have. An output relay sends a signal to another device when the counter reaches a set point. The signal can start/stop a process or trigger an alarm. If power is lost, count backup maintains the count and programming backup maintains settings.

Password lockout prevents tampering and accidental loss of data. A scaling function lets you adjust the unit of measure to suit your application.

Counter rated NEMA 4X is protected from dust and washdowns and can be used outdoors.

For technical drawings and 3-D models, click on a part number.

These counters register up to 600 pulses of compressed air per minute. Counts decrease as air hose length increases; the hose length should not exceed 2 1/2 ft. to reach 600 counts per minute. Pressure must drop to 0 psi between pulses.

Wire these counters/ratemeters to an electrical pulse-emitting switch, sensor, or encoder to count input while tracking rates in units such as gallons per minute. A scaling function lets you adjust the unit of measure to suit your application. Use the toggle button to switch between the count and the rate. IP or NEMA rated, they protect against dust and washdowns and can be used outdoors.

For technical drawings and 3-D models, click on a part number.

For quick installation, these counters/ratemeters fit a standard 1/8 DIN panel cutout. Wire them up to an electrical pulse-emitting switch, sensor, or encoder to count input while tracking rates in units such as gallons per minute. The scaling function lets you adjust the unit of measure to suit your application. Counters are protected from dust and washdowns and can be used outdoors (rated NEMA 4X).

Optional output relays send a signal to another device when a set point is reached. The signal can start/stop a process or trigger an alarm.

For technical drawings and 3-D models, click on a part number.

This meter does not require voltage to register a count. It is protected from dust, water, and splashing oil and coolant (meets IP65, NEMA 4X, NEMA 12). Use it to display running time on a machine so you can schedule preventative maintenance.

Display running time on a machine so you can schedule preventative maintenance.

Non-resettable counters prevent tampering and accidental loss of data.

Counters that are rated NEMA 4X are protected from dust and washdowns and can be used outdoors.

Display running time on a machine so you can schedule preventative maintenance. These counters have two displays. One display shows the total running time and cannot be reset; the other shows the time elapsed since the last maintenance and can be wired for remote reset. The output relay turns on an indicator light and sends a signal to another device when the counter reaches a set point. The signal can start/stop a process or trigger an alarm.

Record the running time of machines and vehicles that vibrate while operating. These meters are battery powered, so they don’t require any special wiring or external power source. IP67 or IP68 rated, they seal out water from temporary submersion.

Non-resettable counters prevent tampering and accidental loss of data.

Display running time on a machine so you can schedule preventative maintenance.

Non-resettable counter prevents tampering and accidental loss of data.

Install these flowmeters in an instrument panel to measure the flow rate of hot water and other liquids reaching up to 212° F. They should be mounted vertically, so liquid flows up from the bottom. As liquid flows through, it pushes an indicator up the scale, showing you the flow rate.

These flowmeters are calibrated with water but can be used with other liquids. If you’re using these with a liquid other than water, you’ll need to calculate the flow rate by multiplying the number shown on the scale by the specific-gravity conversion factor for your liquid.

Flowmeters with a flow-control knob let you open and close the inlet valve to adjust the flow rate within the range.

For technical drawings and 3-D models, click on a part number.