About Timing Functions
More
About Flowmeters and Totalizers
Flowmeters measure the rate of flow for a liquid or a gas. Totalizers measure the cumulative flow volume. Flowmeter/totalizers display both the flow rate and the cumulative flow volume.
More
Panel-Mount Electrically Actuated Counters
Wire these counters up to an electrical pulse-emitting switch, sensor, or encoder for use on machine tools, packaging machinery, or other equipment.
Non-resettable counters prevent tampering and accidental loss of data.
For technical drawings and 3-D models, click on a part number.
For Panel Cutout | Overall | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Resettable | Counting Direction | No. of Digits | Max. Counts per Minute | Ht. | Wd. | Ht. | Wd. | Dp. | Input Voltage | Environmental Rating | Specifications Met | Each | ||
Screw On | ||||||||||||||
Wire Leads | ||||||||||||||
A | Yes | Up | 4 | 600 | 1" | 1.4" | 1.8" | 1.8" | 2.6" | 24V DC, 115V AC | __ | UL Recognized Component | 0000000 | 000000 |
A | Yes | Up | 4 | 600 | 1.1" | 1.5" | 1.8" | 1.8" | 2.6" | 120V AC | __ | UL Recognized Component | 0000000 | 00000 |
A | Yes | Up | 6 | 600 | 1" | 2" | 1.8" | 2.2" | 2.6" | 24V DC, 115V AC | __ | UL Recognized Component | 0000000 | 000000 |
A | Yes | Up | 6 | 600 | 1.1" | 2" | 1.8" | 2.3" | 2.6" | 12V DC | __ | UL Recognized Component | 0000000 | 00000 |
A | Yes | Up | 6 | 600 | 1.1" | 2" | 1.8" | 2.3" | 2.6" | 24V DC | __ | UL Recognized Component | 0000000 | 00000 |
A | Yes | Up | 6 | 600 | 1.1" | 2" | 1.8" | 2.3" | 2.6" | 120V AC | __ | UL Recognized Component | 0000000 | 00000 |
B | Yes | Up | 6 | 1,000 | 1.8" | 3.9" | 1.9" | 4.5" | 2.3" | 120V AC | __ | UL Recognized Component | 0000000 | 000000 |
C | Yes | Up | 6 | 1,000 | 1.8" | 4.9" | 2.2" | 5.6" | 2.3" | 120V AC | __ | UL Recognized Component | 0000000 | 000000 |
D | No | Up | 6 | 600 | 1" | 1.5" | 1.8" | 1.8" | 2.5" | 12V DC | __ | UL Recognized Component | 0000000 | 00000 |
D | No | Up | 6 | 600 | 1" | 1.5" | 1.8" | 1.8" | 2.5" | 24V DC | __ | UL Recognized Component | 0000000 | 00000 |
D | No | Up | 6 | 600 | 1" | 1.5" | 1.8" | 1.8" | 2.5" | 120V AC | __ | UL Recognized Component | 0000000 | 00000 |
E | Yes | Up | 6 | 2,400 | 1.8" | 3" | 1.9" | 4.5" | 2.9" | 6-240V AC, 6-240V DC | __ | __ | 0000000 | 000000 |
F | Yes | Up | 6 | 2,400 | 1.5" | 4.8" | 2.2" | 5.5" | 2.9" | 6-240V AC, 6-240V DC | __ | __ | 0000000 | 000000 |
Clip On | ||||||||||||||
Wire Leads | ||||||||||||||
H | No | Up | 7 | 600 | 0.6" | 1.2" | 0.6" | 1.3" | 1.3" | 120V AC | IP65 | UL Recognized Component, C-UL Recognized Component | 0000000 | 00000 |
Surface-Mount Electrically Actuated Counters
Wire these counters up to an electrical pulse-emitting switch, sensor, or encoder for use on machine tools, packaging machinery, or other equipment.
Non-resettable counters prevent tampering and accidental loss of data.
For technical drawings and 3-D models, click on a part number.
Overall | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Resettable | Counting Direction | Number of Digits | Max. Counts per Minute | Ht. | Wd. | Dp. | Input Voltage | Environmental Rating | Specifications Met | Each | ||
Screw On | ||||||||||||
Wire Leads | ||||||||||||
A | Yes | Up | 4 | 600 | 1.2" | 2.6" | 2.9" | 120V AC | __ | UL Recognized Component | 0000000 | 000000 |
A | Yes | Up | 6 | 600 | 1.2" | 3.1" | 2.9" | 24V DC | __ | UL Recognized Component | 0000000 | 00000 |
A | Yes | Up | 6 | 600 | 1.2" | 3.1" | 2.9" | 120V AC | __ | UL Recognized Component | 0000000 | 00000 |
B | Yes | Up | 5 | 600 | 2.4" | 2.3" | 2.3" | 120V AC | __ | UL Recognized Component | 0000000 | 000000 |
C | Yes | Up | 6 | 1,000 | 2.6" | 3.7" | 1.8" | 120V AC | __ | UL Recognized Component | 0000000 | 000000 |
D | No | Up | 6 | 600 | 2.3" | 1.7" | 2.3" | 120V AC | __ | UL Recognized Component | 0000000 | 00000 |
D | No | Up | 6 | 600 | 2.3" | 1.8" | 2.4" | 24V DC | __ | UL Recognized Component | 0000000 | 00000 |
E | No | Up | 7 | 600 | 1.4" | 1.6" | 1.7" | 12V DC | __ | UL Recognized Component | 0000000 | 00000 |
E | No | Up | 7 | 600 | 1.4" | 1.6" | 1.7" | 24V AC | __ | UL Recognized Component | 0000000 | 00000 |
E | No | Up | 7 | 600 | 1.4" | 1.6" | 1.7" | 120V AC | __ | UL Recognized Component | 0000000 | 00000 |
F | No | Up | 7 | 1,500 | 0.6" | 1.8" | 1.7" | 12V DC | IP65 | UL Recognized Component, C-UL Recognized Component | 0000000 | 00000 |
F | No | Up | 7 | 1,500 | 0.6" | 1.8" | 1.7" | 24V DC | IP65 | UL Recognized Component, C-UL Recognized Component | 0000000 | 00000 |
G | Yes | Up | 6 | 2,400 | 1.8" | 3.9" | 3" | 6-240V AC, 6-240V DC | __ | __ | 0000000 | 000000 |
Panel-Mount Electrically Actuated Counters with Output Relay
Wire these counters up to an electrical pulse-emitting switch, sensor, or encoder for use on machine tools, packaging machinery, or other equipment. They display the set point and count incoming pulses. When the counter reaches the set point, an output relay sends a signal to another device. The signal can start/stop a process or trigger an alarm.
For technical drawings and 3-D models, click on a part number.
For Panel Cutout | Overall | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Resettable | Counting Direction | No. of Digits | No. of Set Points | Max. Counts per Minute | Ht. | Wd. | Ht. | Wd. | Dp. | Input Voltage | Output Relay Current | Each | |
Screw On | |||||||||||||
Wire Leads | |||||||||||||
Yes | Up | 5 | 1 | 600 | 2" | 2" | 2.7" | 2.2" | 2.8" | 120V AC | 5 A @ 250 V AC, 2 A @ 24 V DC | 0000000 | 0000000 |
Yes | Up | 5 | 1 | 600 | 2" | 2" | 2.7" | 2.2" | 2.8" | 24V DC | 5 A @ 250 V AC, 2 A @ 24 V DC | 0000000 | 000000 |
Panel-Mount Electrically Actuated Hour Meters
Display running time on a machine so you can schedule preventative maintenance.
Non-resettable meters prevent tampering and accidental loss of data.
For Panel Cutout | Overall | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Resettable | Counting Direction | No. of Digits | Dia. | Wd. | Ht. | Ht. | Wd. | Dp. | Dia. | Operating Voltage | Each | ||
Screw On | |||||||||||||
Wire Leads | |||||||||||||
A | No | Up | 6 | 2.3" | __ | __ | __ | __ | 2" | 2.9" | 24V AC | 0000000 | 0000000 |
A | No | Up | 6 | 2.3" | __ | __ | __ | __ | 2" | 2.9" | 120V AC | 0000000 | 000000 |
A | No | Up | 6 | 2.3" | __ | __ | __ | __ | 2" | 2.9" | 230V AC | 0000000 | 000000 |
B | No | Up | 6 | __ | 2.3" | 2.3" | __ | __ | 2.5" | 3" | 120V AC | 0000000 | 000000 |
B | No | Up | 6 | 2.3" | __ | __ | __ | __ | 2.5" | 3.5" | 120V AC | 0000000 | 00000 |
C | No | Up | 5 | __ | 1.5" | 1" | __ | __ | 1.9" | 2.9" | 120V AC | 0000000 | 00000 |
D | No | Up | 5 | __ | 1.5" | 1" | 1.1" | 2.1" | 1.9" | __ | 120V AC | 0000000 | 00000 |
Electrically Actuated Hour Meters with Output Relay
Display running time on a machine so you can schedule preventative maintenance. These counters have two displays. One display shows the total running time and cannot be reset; the other shows the time elapsed since the last maintenance and can be wired for remote reset. The output relay turns on an indicator light and sends a signal to another device when the counter reaches a set point. The signal can start/stop a process or trigger an alarm.
Overall | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Resettable | Counting Direction | No. of Digits | No. of Set Points | For Panel Cutout Dia. | Dp. | Dia. | Operating Voltage | Output Relay Current | Environmental Rating | Each | |
Press On | |||||||||||
Wire Leads | |||||||||||
No | Up | 6 | 1 | 2" | 1.7" | 2.3" | 85-265V AC, 90-360V DC | 0.2 A @ 265 V AC, 0.2 A @ 40 V DC | IP67 | 00000000 | 0000000 |
No | Up | 6 | 1 | 2" | 1.7" | 2.3" | 10-40V DC | 0.2 A @ 265 V AC, 0.2 A @ 40 V DC | IP67 | 00000000 | 000000 |
Electrically Actuated Minute Meters
Display running time on a machine so you can schedule preventative maintenance.
Non-resettable counter prevents tampering and accidental loss of data.
Socket-Connect Flowmeter/Totalizers with Remote Display
Often used in hard-to-access areas, these flowmeter/totalizers have a display that can be placed up to 25 feet from the sensor. Use them to measure the rate and volume of liquid flowing through your system. They measure flow by counting how many times their turbine turns as liquid flows through. To avoid clogging the turbine and other damage to the sensor, use them only with clean, low-viscosity liquids. Batch totals are resettable but can be protected with a security code to prevent tampering. The reset function can also be disabled so that they operate as a cumulative totalizer. Cumulative totals cannot be reset. No matter the mounting orientation, they’ll measure flow correctly.
These flowmeter/totalizers are calibrated with water. You can use them with other liquids, but they may not measure accurately if the liquid’s viscosity differs from water.
For a complete unit, you’ll need a display, a sensor, and a tee fitting (all sold separately).
Sensors thread onto the tee fitting (sold separately).
For technical drawings and 3-D models, click on a part number.
Noncontact Flow Transmitters
Using ultrasonic waves, these transmitters measure the flow rate of your liquid from outside your pipe. They're a good choice for applications where you need to retrofit your system or avoid liquid coming into contact with the transmitter. Also known as transducers, these transmitters convert measurements to an electrical pulse that can be interpreted by receiving devices, such as remote displays and programmable logic controllers (PLCs). The pulse outputs match the input voltage of the transmitter. The higher the flow, the more pulses they send. For your receiving device to interpret the signal, you will need to calibrate it for the measurement range and output signal of the transmitter. They only give accurate readings within the rated measurement range. Configure them for either a 4-20mA or digital pulse output when installing.
A digital display makes it easy to check flow rate and configure settings. Clamp these transmitters onto your pipe with the included mounting hardware and gel pads. They measure flow no matter the mounting orientation.
These transmitters are calibrated with water but can be used with other liquids and will generally measure accurately, even if they differ in viscosity and density. You can recalibrate them in the field for accurate readings on pipe and operating conditions.
For technical drawings and 3-D models, click on a part number.
Flow Range for Pipe Size, gpm | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Pipe Size | 3/4 | 2 | 4 | End-to-End Lg. | Accuracy | Temp. Range, °F | Input Voltage | Mounting Orientation | Field Recalibratable | Each | |
One Digital Pulse Output and One 4-20mA Analog Transmitter Output—Wire Leads | |||||||||||
Polycarbonate Plastic Body | |||||||||||
3/4 to 4 | 0 to 45 | 0 to 320 | 0 to 1,285 | 9 3/4" | ±3% | 32° to 185° | 12V DC to 24V AC/DC | Any | Yes | 0000000 | 000000000 |
Flow Transmitters with Sight
Send flow rate data using these transmitters while also being able to visually confirm liquid is flowing. They measure flow by counting how many times the turbine turns as the liquid moves through it. To prevent clogging the turbine and other damage, use them only with clean, low-viscosity liquids. These transmitters, also known as transducers, convert the flow measurement to an electrical signal that can be interpreted by receiving devices, such as remote displays and programmable logic controllers (PLCs), to monitor flow or control equipment. Mount them directly inline with your system. They measure accurately in any mounting orientation.
These transmitters are calibrated with water. You can use them with other liquids, but they may not measure accurately if the liquid’s viscosity differs from water.
Transmitters with an analog output increase their output signal as flow increases. For your receiving device to interpret the signal, you will need to calibrate it for the measurement range and output signal of the transmitter. They only give accurate readings within the rated measurement range.
Transmitters with a digital pulse output send flow data using spikes of voltage that match the input voltage of the transmitter. The higher the flow, the more pulses they send.
For technical drawings and 3-D models, click on a part number.
Pipe Connections | Flow Range, gpm | End-to-End Lg. | Accuracy | Max. Pressure | Temp. Range, °F | Seal Material | Mounting Orientation | Input Voltage | Pulse Frequency, Hz | Pulse Frequency per Volume | Each | |
One 4-20mA Analog Transmitter Output—Wire Leads | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Glass-Filled Polypropylene Plastic Body with Glass-Filled Polypropylene Plastic Fittings | ||||||||||||
1/2 NPT Female | 0.25 to 2.5 | 3 11/16" | 2% | 150 psi @ 70° F | 20° to 150° | Buna-N Rubber | Any | 12-24V DC | __ | __ | 00000000 | 0000000 |
1/2 NPT Female | 0.5 to 5 | 3 11/16" | 2% | 150 psi @ 70° F | 20° to 150° | Buna-N Rubber | Any | 12-24V DC | __ | __ | 00000000 | 000000 |
1/2 NPT Female | 1.5 to 15 | 3 11/16" | 2% | 150 psi @ 70° F | 20° to 150° | Buna-N Rubber | Any | 12-24V DC | __ | __ | 00000000 | 000000 |
316 Stainless Steel Body with 316 Stainless Steel Fittings | ||||||||||||
1/2 NPT Female | 0.25 to 2.5 | 3 11/16" | ±2% | 500 psi @ 70° F | 20° to 212° | Buna-N Rubber | Any | 12-24V DC | __ | __ | 00000000 | 00000000 |
1/2 NPT Female | 0.5 to 5 | 3 11/16" | ±2% | 500 psi @ 70° F | 20° to 212° | Buna-N Rubber | Any | 12-24V DC | __ | __ | 00000000 | 00000000 |
1/2 NPT Female | 1.5 to 15 | 3 11/16" | ±2% | 500 psi @ 70° F | 20° to 212° | Buna-N Rubber | Any | 12-24V DC | __ | __ | 00000000 | 00000000 |
3/4 NPT Female | 1.5 to 15 | 5 1/4" | ±2% | 500 psi @ 70° F | 20° to 212° | Buna-N Rubber | Any | 12-24V DC | __ | __ | 00000000 | 00000000 |
3/4 NPT Female | 5 to 50 | 5 1/4" | ±2% | 500 psi @ 70° F | 20° to 212° | Buna-N Rubber | Any | 12-24V DC | __ | __ | 00000000 | 00000000 |
1 NPT Female | 1.5 to 15 | 5 1/4" | ±2% | 500 psi @ 70° F | 20° to 212° | Buna-N Rubber | Any | 12-24V DC | __ | __ | 00000000 | 00000000 |
1 NPT Female | 5 to 50 | 5 1/4" | ±2% | 500 psi @ 70° F | 20° to 212° | Buna-N Rubber | Any | 12-24V DC | __ | __ | 00000000 | 00000000 |
One 0-5V DC Analog Transmitter Output—Wire Leads | ||||||||||||
Glass-Filled Polypropylene Plastic Body with Glass-Filled Polypropylene Plastic Fittings | ||||||||||||
1/2 NPT Female | 0.25 to 2.5 | 3 11/16" | 2% | 150 psi @ 70° F | 20° to 150° | Buna-N Rubber | Any | 12-24V DC | __ | __ | 00000000 | 000000 |
1/2 NPT Female | 0.5 to 5 | 3 11/16" | 2% | 150 psi @ 70° F | 20° to 150° | Buna-N Rubber | Any | 12-24V DC | __ | __ | 00000000 | 000000 |
1/2 NPT Female | 1.5 to 15 | 3 11/16" | 2% | 150 psi @ 70° F | 20° to 150° | Buna-N Rubber | Any | 12-24V DC | __ | __ | 00000000 | 000000 |
316 Stainless Steel Body with 316 Stainless Steel Fittings | ||||||||||||
1/2 NPT Female | 0.25 to 2.5 | 3 11/16" | ±2% | 500 psi @ 70° F | 20° to 212° | Buna-N Rubber | Any | 12-24V DC | __ | __ | 00000000 | 000000 |
1/2 NPT Female | 0.5 to 5 | 3 11/16" | ±2% | 500 psi @ 70° F | 20° to 212° | Buna-N Rubber | Any | 12-24V DC | __ | __ | 00000000 | 000000 |
1/2 NPT Female | 1.5 to 15 | 3 11/16" | ±2% | 500 psi @ 70° F | 20° to 212° | Buna-N Rubber | Any | 12-24V DC | __ | __ | 00000000 | 000000 |
3/4 NPT Female | 1.5 to 15 | 5 1/4" | ±2% | 500 psi @ 70° F | 20° to 212° | Buna-N Rubber | Any | 12-24V DC | __ | __ | 00000000 | 00000000 |
3/4 NPT Female | 5 to 50 | 5 1/4" | ±2% | 500 psi @ 70° F | 20° to 212° | Buna-N Rubber | Any | 12-24V DC | __ | __ | 00000000 | 00000000 |
1 NPT Female | 1.5 to 15 | 5 1/4" | ±2% | 500 psi @ 70° F | 20° to 212° | Buna-N Rubber | Any | 12-24V DC | __ | __ | 00000000 | 00000000 |
1 NPT Female | 5 to 50 | 5 1/4" | ±2% | 500 psi @ 70° F | 20° to 212° | Buna-N Rubber | Any | 12-24V DC | __ | __ | 00000000 | 00000000 |
One Digital Pulse Output—Wire Leads | ||||||||||||
Polypropylene Plastic Body with Polypropylene Plastic Fittings | ||||||||||||
1/4 NPT Female | 0.1 to 5 | 3 1/16" | ±7% | 100 psi @ 70° F | 33° to 180° | Fluoroelastomer Rubber | Any | 4.25-24V DC | 15-225 | __ | 0000000 | 000000 |
1/2 NPT Female | 1.5 to 20 | 3 1/16" | ±15% | 100 psi @ 70° F | 33° to 180° | Fluoroelastomer Rubber | Any | 4.25-24V DC | 15-225 | __ | 0000000 | 000000 |
Brass Body with Brass Fittings | ||||||||||||
1/4 NPT Female | 0.1 to 5 | 3" | ±7% | 200 psi @ 70° F | 33° to 212° | Fluoroelastomer Rubber | Any | 4.5-24V DC | 15-225 | __ | 0000000 | 000000 |
1/2 NPT Female | 1.5 to 20 | 3" | ±15% | 200 psi @ 70° F | 33° to 212° | Fluoroelastomer Rubber | Any | 4.5-24V DC | 15-225 | __ | 0000000 | 000000 |
1 NPT Female | 8 to 60 | 3 15/16" | ±15% | 200 psi @ 70° F | 33° to 212° | Fluoroelastomer Rubber | Any | 4.5-24V DC | 15-225 | __ | 0000000 | 000000 |
316 Stainless Steel Body with 316 Stainless Steel Fittings | ||||||||||||
1/2 NPT Female | 0.25 to 2.5 | 3 11/16" | ±2% | 500 psi @ 70° F | 20° to 212° | Buna-N Rubber | Any | 12-24V DC | __ | 200 Pulses per gal | 00000000 | 000000 |
1/2 NPT Female | 1.5 to 20 | 3" | ±15% | 200 psi @ 70° F | 33° to 212° | Fluoroelastomer Rubber | Any | 4.5-24V DC | 15-225 | __ | 0000000 | 000000 |
3/4 NPT Female | 5 to 30 | 3 15/16" | ±15% | 200 psi @ 70° F | 33° to 212° | Fluoroelastomer Rubber | Any | 4.5-24V DC | 15-225 | __ | 0000000 | 000000 |
1 NPT Female | 8 to 60 | 3 15/16" | ±15% | 200 psi @ 70° F | 33° to 212° | Fluoroelastomer Rubber | Any | 4.5-24V DC | 15-225 | __ | 0000000 | 000000 |
Ultra-Low-Flow Flow Transmitters
Often used in low-flow metering applications for lubricants or antifreeze, these transmitters measure flow rate and send the data to a remote display or programmable logic controller (PLC). To measure flow, they have oval-shaped gears that move the liquid through the flowmeter—how fast the gears turn correspond to the flow rate. Also known as transducers, they help you monitor status or control equipment by converting measurements to an electrical pulse that can be interpreted by receiving devices. The higher the flow, the more pulses they send. Mount them inline with your pipe system. They’re accurate in any mounting orientation.
These transmitters are calibrated with oil but can be used with other liquids and will generally measure accurately, even if they differ in viscosity and density.
For technical drawings and 3-D models, click on a part number.
Pipe Connections | Flow Range, ml/min. | Accuracy | Overall Ht. | Dia. | Max. Pressure | Temp. Range, °F | Seal Material | Mounting Orientation | Input Voltage Range | Pulse Frequency per Volume | Each | |
One Digital Pulse Output—Wire Leads | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
316 Stainless Steel Body | ||||||||||||
1/8 NPT Female | 3 to 300 | ±0.5% | 2 7/8" | 1 1/2" | 1450 psi @ 70° F | -22° to 176° | Viton® Fluoroelastomer | Any | 4V DC to 26V DC | 9 Pulses per ml | 0000000 | 000000000 |
1/8 NPT Female | 10 to 1,000 | ±0.5% | 2 7/8" | 1 15/16" | 1450 psi @ 70° F | -22° to 176° | Viton® Fluoroelastomer | Any | 4V DC to 26V DC | 4 Pulses per ml | 0000000 | 00000000 |
Flow Transmitters
Send flow rate measurements to monitor and control equipment. Also known as transducers, these transmitters convert flow rate measurements to an electrical signal that can be interpreted by receiving devices, such as remote displays and programmable logic controllers (PLCs). As flow increases, the output signal increases. For your receiving device to interpret the signal, you will need to calibrate it for the measurement range and output signal of the transmitter. They only give accurate readings within the rated measurement range. Mount them directly inline with your system. They measure flow correctly no matter their mounting orientation.
These transmitters are calibrated with water. You can use them with other liquids, but they may not measure accurately if the liquid’s viscosity differs from water.
Turbine transmitters measure flow by counting how many times their turbine turns as liquid passes through. To avoid clogging the turbine and other damage, use them only with clean, low-viscosity liquids. The digital output sends flow data with a pulse, which is a spike of voltage. The higher the flow, the more pulses they send. The voltage of the pulse output matches the input voltage sent to the transmitters. These transmitters meet NSF/ANSI 61 for use with drinking water.
For technical drawings and 3-D models, click on a part number.
Pipe Connections | Flow Range, gpm | End-to-End Lg. | Accuracy | Max. Pressure | Temp. Range, °F | Input Voltage | Mounting Orientation | Field Recalibratable | Maximum Output Current | Each | |
One 4-20mA Analog Transmitter/Digital Pulse Output—Wire Leads | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Polyamide Plastic Body with Polyamide Plastic Fittings | |||||||||||
1/4 NPT Male | 0.026 to 0.65 | 1 3/4" | ±3% | 362 psi @ 212 ° F | -4° to 212° | 5 to 24V DC | Any | No | 20mA | 00000000 | 0000000 |
3/8 NPT Male | 0.13 to 1.3 | 2 5/32" | ±3% | 362 psi @ 212 ° F | -4° to 212° | 5 to 24V DC | Any | No | 20mA | 00000000 | 00000 |
3/8 NPT Male | 0.26 to 4 | 2 5/32" | ±3% | 362 psi @ 212 ° F | -4° to 212° | 5 to 24V DC | Any | No | 20mA | 00000000 | 00000 |
3/8 NPT Male | 0.53 to 9.2 | 2 5/32" | ±3% | 362 psi @ 212 ° F | -4° to 212° | 5 to 24V DC | Any | No | 20mA | 00000000 | 00000 |
3/4 NPT Male | 1.32 to 17.17 | 2 15/16" | ±3% | 362 psi @ 212 ° F | -4° to 212° | 5 to 24V DC | Any | No | 20mA | 00000000 | 000000 |
Brass Body with Brass Fittings | |||||||||||
3/8 NPT Male | 0.5 to 2.11 | 2 5/32" | ±3% | 362 psi @ 212 ° F | -4° to 212° | 5 to 24V DC | Any | No | 20mA | 00000000 | 000000 |
3/8 NPT Male | 0.8 to 6.6 | 2 5/32" | ±3% | 362 psi @ 212 ° F | -4° to 212° | 5 to 24V DC | Any | No | 20mA | 00000000 | 000000 |
Large-Display Digital Timers
Read elapsed or remaining time from up to 150 ft. away—roughly half the length of a football field. These timers count up and down from zero. When counting down past zero, they flash and display a negative symbol before the time. To start, pause, and reset these timers, they require a controller (sold separately). The controller comes with a 20 ft. RJ45 cable to connect it to the timer.
Add a splitter to connect two timers to the same controller.
Timers | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Case | Controllers | Splitters | ||||||||||||||
Timing Functions | Max. No. of Events | Max. Timer Duration | Max. Alarm Duration | Ht. | Wd. | Dp. | Material | Color | Electrical Connection | Includes | Each | Each | Each | |||
Count Up, Count Down, Pause | 1 | 100 hrs. | Continuous | 6 1/4" | 15 1/2" | 1 1/2" | Plastic | Black | Hardwire | Mounting Bracket | 0000000 | 0000000 | 0000000 | 0000000 | 0000000 | 000000 |