Filter by
System of Measurement
Probe Type
Distance Measured
Container Type
Dial Diameter
Dial Face Color
Dial Indicator Size
Measuring Increments
Contact Point Material
DFARS Specialty Metals
Export Control Classification Number (ECCN)
REACH
RoHS
Color
Measures
Finish
Manufacturer
Manufacturer Series
Countersink Gauges
 |
With Cone Probe |
For a flush fit every time, these gauges ensure your fastener and countersink mate perfectly for a secure hold. These gauges are often used to verify the top diameter and angle of holes in precision assemblies. They’re preferred over chamfer gauges, which also measure diameter but don’t check countersink angle. When the conical probe touches the hole’s angled walls, the diameter will display on the dial.
To verify the countersink angle, feel how snug the probe fits into the hole. You’ll also know the angle is incorrect when the reading for the top diameter is a different value than expected. Choose a gauge with an angle that matches that of your hole.
Dial | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Distance Measured | Accuracy | Measuring Increments | Probe Type | Material | Dial Indicator Size | Dia. | Face Color | Contact Point Material | Each | |||
90° Angle Measured | ||||||||||||
| 0.02" to 0.17" | ±0.0005" | 0.002" | Cone | Powder-Coated Aluminum | AGD Group 1 | 1 5/8" | White | Steel | 8003N15 | 0000000 | ||
| 0.16" to 0.36" | ±0.0005" | 0.002" | Cone | Powder-Coated Aluminum | AGD Group 1 | 1 5/8" | White | Steel | 8003N16 | 000000 | ||
| 0.36" to 0.56" | ±0.0005" | 0.002" | Cone | Powder-Coated Aluminum | AGD Group 1 | 1 5/8" | White | Steel | 8003N17 | 000000 | ||
| 0.56" to 0.78" | ±0.0005" | 0.002" | Cone | Powder-Coated Aluminum | AGD Group 1 | 1 5/8" | White | Steel | 8003N18 | 000000 | ||
Starrett Countersink Gauges
 |
With Cone Probe |
Mate your fastener and countersink perfectly for a secure hold with these Starrett gauges. They are often used in vehicle and metal manufacturing to check the top diameter and countersink angle of a hole. When the conical probe touches the hole’s angled walls, the diameter will display on the dial. You can verify the countersink angle based on how snug the probe fits into the hole. Even when you lift the gauge out of the hole, your measurement will stay on the dial until you press the reset button.
Choose a gauge with an angle that’s equal to the angle of the countersunk hole you’re trying to measure.
Dial | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Distance Measured | Accuracy | Measuring Increments | Probe Type | Material | Dial Indicator Size | Dia. | Face Color | Contact Point Material | Mfr. Model No. | Each | |||
90° Angle Measured | |||||||||||||
| 0.02" to 0.17" | ±0.0002" | 0.002" | Cone | Steel | AGD Group 1 | 1 5/8" | White | Steel | 688-1Z | 21125A372 | 0000000 | ||
| 0.16" to 0.36" | ±0.0002" | 0.002" | Cone | Steel | AGD Group 1 | 1 5/8" | White | Steel | 688-2Z | 21125A373 | 000000 | ||
