These 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic.

More corrosion resistant than 18-8 stainless steel screws, these screws have excellent resistance to chemicals and salt water. They may be mildly magnetic.

Closely spaced threads on these screws fit in holes with a fine pitch. They're not compatible with standard metric threads.

Brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

These metric screws have good chemical resistance and may be mildly magnetic.

More corrosion resistant than 18-8 stainless steel screws, these metric screws have excellent resistance to chemicals and salt water.

These screws meet Japanese Industrial Standards.

A zinc plating on these metric steel screws provides mild corrosion resistance.

These screws meet Japanese Industrial Standards.

These metric brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

Our most corrosion resistant screws, these metric titanium screws withstand salt water, acids, and chemicals.

These metric screws have a decorative, domed head that sits above the surface when installed.

These metric 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic.

More corrosion resistant than 18-8 stainless steel screws, these metric screws have excellent resistance to chemicals and salt water. They may be mildly magnetic.

These metric screws are chemical and oil resistant, nonconductive, and lightweight. Exposure to moisture may cause them to expand.

These metric polycarbonate screws resist breaking in high-impact applications better than other plastic screws. All are chemical and oil resistant, nonconductive, and lightweight.

These screws are more reliable in high-stress, high-temperature environments than other plastic screws. They withstand water, steam, and temperatures up to 500° F.

Angled under the head, these metric screws fit in countersunk holes and sit flush with the surface of your part.

These metric brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

These metric 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic.

These metric brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

Made from alloy steel, these screws are twice as strong as standard steel Torx flat head screws.

These 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic.

These metric A286 stainless steel screws have comparable strength to alloy steel with the corrosion resistance of 18-8 stainless steel.

With a tamper-resistant Torx drive (also known as a pin-in Torx drive), these metric screws are difficult to remove without special tools.

With an O-ring under the head, these metric screws seal out leaks and contaminants while also preventing unwanted removal.

These metric screws have a tamper-resistant drilled spanner drive, making them difficult to remove without special tools.

With a tamper-resistant hex drive (also known as a pin-in hex drive), these metric screws are difficult to remove without special tools.

Stainless steel screws have excellent corrosion resistance in most environments.

A nylon patch bonded to the threads adds friction to prevent loosening from vibration. Made of 18-8 stainless steel, these screws have good chemical resistance and may be mildly magnetic.

To prevent leaks and seal out contaminants, these metric screws have an O-ring under the head.

Tighten these screws by turning them to the left; once fastened, they prevent loosening from counterclockwise motion.

To vent fluids and gases trapped under the screw, these metric screws are drilled through the shaft.

Without a head to get in the way, these screws fit in tight spaces where standard shoulder screws cannot. Either thread them in a countersunk hole for a flush mount, or install them with the shoulder sticking out to use them as pins or dowels for aligning and locating components.

These steel screws cut threads in drilled holes as they’re turned, so they require less driving torque and cause less stress on your material than thread forming screws.

For a finished appearance that reduces the chance of snags on other material, these screws fit snugly in countersunk holes and have a domed head.

These steel screws save you time and effort by drilling their own holes and fastening in a single operation.

A decorative rounded top provides a finished appearance.

Beveled under the head for use in countersunk holes.

More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water.

These steel screws are available with corrosion-resistant finishes.

More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water.

These steel screws have a black-oxide finish to resist corrosion in dry environments.

The S-shaped drive can be installed with a standard slotted driver, but requires a special tool for removal.

Also known as pin-in-hex, install and remove these screws with a tamper-resistant hex driver.

These steel screws are zinc plated to resist corrosion in wet environments.

18-8 stainless steel screws have good chemical resistance.

Brass screws are corrosion resistant in wet environments and electrically conductive.

These steel screws are zinc plated to resist corrosion in wet environments.

18-8 stainless steel screws have good chemical resistance.

Brass screws are corrosion resistant in wet environments and electrically conductive.

18-8 stainless steel screws have good chemical resistance.

18-8 stainless steel screws have good chemical resistance.

Thread-forming screws press threads into drilled holes for a tight vibration-resistant assembly.

More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water.

More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water.

18-8 stainless steel screws have good chemical resistance.

Because these steel screws cut threads into drilled holes as they’re turned, they require less driving torque and cause less stress on material than thread-forming screws. Also known as trim-head deck screws, they have a small flat head and slender shank to reduce the risk of splitting boards.

The neoprene-backed washer seals out contaminants.

These steel screws are beveled under the head for use in countersunk holes.

These 410 stainless steel screws are more corrosion resistant than ultra-corrosion-resistant coated steel screws.